1784-PM02AE | Allen Bradley PLC PLC 5

1784-PM02AE

Rated 4.9 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1784-PM02AE

Description: The 1784-PM02AE Board is a 2-axis PCI Board, manufactured by Allen Bradley. The 1784-PM02AE Board meets the ASA system specifications.
Available Now
Request a quote for 1784-PM02AE

Description:

The 1784-PM02AE Board is a 2-axis PCI Board, manufactured by Allen Bradley. The 1784-PM02AE Board meets the ASA system specifications.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1784-PM02AE.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 12 reviews

    Technical Specifications for 1784-PM02AE

BrandAllen-Bradley / Rockwell Automation
SeriesPLC 5
Part Number1784-PM02AE
Number of Axis2
Power Voltage24V DC input
Motion Type Analog
Board Type PCI Board
CE ApprovedYes
ESD SensitiveYes
BrandAllen-Bradley / Rockwell Automation
SeriesPLC 5
Part Number1784-PM02AE
Number of Axis2
Power Voltage24V DC input
Motion Type Analog
Board Type PCI Board
CE ApprovedYes
ESD SensitiveYes
s

About 1784-PM02AE

The 1784-PM02AE Board is an Allen-Bradley 2-axis PCI Board. The 1784-PM02AE Board connects to a termination panel through the Premade 34-pair, 28 AWG SCI shielded cable. The 1784-PM02AE Board requires a minimum of 50 MB of free hard disk space. The PC that hosts it should have a RAM capacity of 128 MB at the minimum. Verify that there is an open 32-bit local PCI Bus Slot and that the computer is DMA capable, and allow for bus metering on the PCI Bus. Note that the 1784-PM02AE Board is intended to be used in a heavy industrial environment and not in a domestic or office environment. It has the ability to support 2 axes that send cyclic position commands.



 



The 1784-PM02AE Board meets the ASA system specifications and it conforms to the common presentation format of the communication cards. Note that only up to 4 cards should be installed on a single computer. A termination panel should be used when connecting the 1784-PM02AE Board to a computer. This facilitates the wiring of drives and encoders for use with the card. The 1784-PM02AE Board is designed to meet the Council Directive 89/336/EEC Electromagnetic Compatibility standard. In addition, the 1784-PM02AE Board bears the CE marking, showing that it is approved for installation within the European Union and the EEA regions. The unit is also tested to met the Council Directive 73/23/EEC for low voltage. The card is highly sensitive to electrostatic discharge. Therefore, the technicians should be aware that electrostatic discharge may be present in the environment, and while handling the unit, they should ensure that ESD protection is taken care of appropriately.

Repair Services for 1784-PM02AE

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1784-PM02AE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1784-PM02AE

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1784-PM02AE

Resolutions For 1784-PM02AE

About

Technical Specifications for 1784-PM02AE

BrandAllen-Bradley / Rockwell Automation
SeriesPLC 5
Part Number1784-PM02AE
Number of Axis2
Power Voltage24V DC input
Motion Type Analog
Board Type PCI Board
CE ApprovedYes
ESD SensitiveYes
BrandAllen-Bradley / Rockwell Automation
SeriesPLC 5
Part Number1784-PM02AE
Number of Axis2
Power Voltage24V DC input
Motion Type Analog
Board Type PCI Board
CE ApprovedYes
ESD SensitiveYes

About 1784-PM02AE

The 1784-PM02AE Board is an Allen-Bradley 2-axis PCI Board. The 1784-PM02AE Board connects to a termination panel through the Premade 34-pair, 28 AWG SCI shielded cable. The 1784-PM02AE Board requires a minimum of 50 MB of free hard disk space. The PC that hosts it should have a RAM capacity of 128 MB at the minimum. Verify that there is an open 32-bit local PCI Bus Slot and that the computer is DMA capable, and allow for bus metering on the PCI Bus. Note that the 1784-PM02AE Board is intended to be used in a heavy industrial environment and not in a domestic or office environment. It has the ability to support 2 axes that send cyclic position commands.



 



The 1784-PM02AE Board meets the ASA system specifications and it conforms to the common presentation format of the communication cards. Note that only up to 4 cards should be installed on a single computer. A termination panel should be used when connecting the 1784-PM02AE Board to a computer. This facilitates the wiring of drives and encoders for use with the card. The 1784-PM02AE Board is designed to meet the Council Directive 89/336/EEC Electromagnetic Compatibility standard. In addition, the 1784-PM02AE Board bears the CE marking, showing that it is approved for installation within the European Union and the EEA regions. The unit is also tested to met the Council Directive 73/23/EEC for low voltage. The card is highly sensitive to electrostatic discharge. Therefore, the technicians should be aware that electrostatic discharge may be present in the environment, and while handling the unit, they should ensure that ESD protection is taken care of appropriately.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1784-PM02AE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1784-PM02AE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF