DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1784-T50A terminal is a 20-MEG operator interface terminal by Allen-Bradley. It comes with a display unit and a full keyboard.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1784-T50A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-T50A |
Description | Operator interface terminal |
Voltage | 115/230 Volts AC |
Current | 5/2.5 Amperes |
Temperature | 0-60 degrees Celsius |
Frequency | 47/63 Hertz |
Display | CRT |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-T50A |
Description | Operator interface terminal |
Voltage | 115/230 Volts AC |
Current | 5/2.5 Amperes |
Temperature | 0-60 degrees Celsius |
Frequency | 47/63 Hertz |
Display | CRT |
The 1784-T50A interface terminal is a 20-MEG rated operator interface terminal for different industries. It runs with a voltage rating of 115 to 230 Volts AC and it has a current rating of 2.5 to 5 Amps. The operating frequency of the terminal is 47 to 63 Hertz. The terminal has a display unit and a full-fledged keyboard on the front side. The keyboard comes with all the functionalities of a regular keyboard with alphanumeric keys, control keys, and function keys. The rear side of the terminal has a reset switch, a brightness level adjustment dial, a power on/off switch, and a power supply port. The 1784-T50A terminal is also equipped with serial communication ports for communication. It is a single-phase device used for monitoring and communication. The display terminal is a CRT display with great viewing angles. The brightness of the terminal can be adjusted by using rotating dial located on the rear of the terminal.
The terminal can be connected to a personal computer for data downloading and uploading over serial communication. The installation of the terminal should take place in a clean and dry environment free from dust, dirt, and harmful vapors. It should also be kept away from all heat-generating devices. The ambient temperature should not exceed 60 degrees Celsius. The 1784-T50A terminal is cooled by using the convection cooling method, and this means that the airflow between the terminal and the ventilation source should not be obstructed.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-T50A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-T50A |
Description | Operator interface terminal |
Voltage | 115/230 Volts AC |
Current | 5/2.5 Amperes |
Temperature | 0-60 degrees Celsius |
Frequency | 47/63 Hertz |
Display | CRT |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-T50A |
Description | Operator interface terminal |
Voltage | 115/230 Volts AC |
Current | 5/2.5 Amperes |
Temperature | 0-60 degrees Celsius |
Frequency | 47/63 Hertz |
Display | CRT |
The 1784-T50A interface terminal is a 20-MEG rated operator interface terminal for different industries. It runs with a voltage rating of 115 to 230 Volts AC and it has a current rating of 2.5 to 5 Amps. The operating frequency of the terminal is 47 to 63 Hertz. The terminal has a display unit and a full-fledged keyboard on the front side. The keyboard comes with all the functionalities of a regular keyboard with alphanumeric keys, control keys, and function keys. The rear side of the terminal has a reset switch, a brightness level adjustment dial, a power on/off switch, and a power supply port. The 1784-T50A terminal is also equipped with serial communication ports for communication. It is a single-phase device used for monitoring and communication. The display terminal is a CRT display with great viewing angles. The brightness of the terminal can be adjusted by using rotating dial located on the rear of the terminal.
The terminal can be connected to a personal computer for data downloading and uploading over serial communication. The installation of the terminal should take place in a clean and dry environment free from dust, dirt, and harmful vapors. It should also be kept away from all heat-generating devices. The ambient temperature should not exceed 60 degrees Celsius. The 1784-T50A terminal is cooled by using the convection cooling method, and this means that the airflow between the terminal and the ventilation source should not be obstructed.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-T50A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-T50A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.