PLC-5-80C | Allen Bradley PLC PLC 5

PLC-5-80C

Rated 4.7 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

PLC-5-80C

Revisions: Ser A 
Description: Allen Bradley PLC 5 1785-L80C ControlNet PLC-5 Processor, Forcible 3072 and Nonforcible 50176 Max Analog I/O, 100 Kilowords, 3.0 Amperes Backplane Current (at 5 Volts)
Available Now
Request a quote for PLC-5-80C

Description: Allen Bradley PLC 5 1785-L80C ControlNet PLC-5 Processor, Forcible 3072 and Nonforcible 50176 Max Analog I/O, 100 Kilowords, 3.0 Amperes Backplane Current (at 5 Volts)

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the PLC-5-80C.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 15 reviews

    Technical Specifications for PLC-5-80C

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.PLC-5-80C
Module TypeControlNet PLC-5 Processor
Cat Number1785-L80C
Max User Memory Words100 Kilowords
Battery-Backed Static RAMYes
EEPROM Program Backup Option (using 1785-ME16, -ME32, -ME64, and -M100)Yes
Protected MemoryNo
Max Total I/OForcible 3072 (any mix) or 3072 in + 3072 out (complementary), Nonforcible 50176
Max Analog I/OForcible 3072 and Nonforcible 50176
I/O Scan Time Per RackControlNet I/O 0.5 ms (average); Universal Remote I/O 10 ms at 57.6 kbits/s, 7 ms at 115.2 kbits/s, 3 ms at 230.4 mbits/s
Max I/O Chassis Total125
Max I/O Chassis Extended Local0
Max I/O Chassis Universal Remote60
RS-232-C/422-A/423- A Ports1
Control Coprocessor Expansion PortYes
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.PLC-5-80C
Module TypeControlNet PLC-5 Processor
Cat Number1785-L80C
Max User Memory Words100 Kilowords
Battery-Backed Static RAMYes
EEPROM Program Backup Option (using 1785-ME16, -ME32, -ME64, and -M100)Yes
Protected MemoryNo
Max Total I/OForcible 3072 (any mix) or 3072 in + 3072 out (complementary), Nonforcible 50176
Max Analog I/OForcible 3072 and Nonforcible 50176
I/O Scan Time Per RackControlNet I/O 0.5 ms (average); Universal Remote I/O 10 ms at 57.6 kbits/s, 7 ms at 115.2 kbits/s, 3 ms at 230.4 mbits/s
Max I/O Chassis Total125
Max I/O Chassis Extended Local0
Max I/O Chassis Universal Remote60
RS-232-C/422-A/423- A Ports1
Control Coprocessor Expansion PortYes
s

About PLC-5-80C

The PLC-5-80C (1785-L80C) ControlNet Programmable Controller by Allen-Bradley is a 100K word programmable controller installed on the 1771 I/O chassis which directs the processes of field devices and has a maximum I/O capacity of 3072. The module requires a backplane current of 3.3A at 5V DC and it has a maximum heat dissipation of 59 BTU/hour when operational. The controller is designed to function without de-rating at a temperature range between 0 and 60 oC (32 and 140 oF) at a relative humidity range of 5-95% without condensation and it is IEC-tested and rated to withstand 2G of operational vibration at 10-500Hz and a 30G operational shock. The PLC-5-80C supports the use of the ControlNet hot backup cartridge (1785-CHBM), a battery module (1770-XYC), and a battery-backed memory module (either 1785-ME32, 1785-ME64 or 1785-M100). The PLC-5-80C is designed to be compatible with the 1771 intelligent, 8, 16, and 32-point I/O modules, and address I/O modules through the 2-slot, 1-slot, and ½-slot addressing modes.





The PLC-5-80C has an internal circuit clock/calendar with ±5 min per month accuracy variation at 60 oC, with a timing accuracy of 1 program scan, and has a program scan time of 0.5ms per K word (in bit logic), and 2ms per K word. The controller has an RJ-45 type ControlNet Network Access Port (NAP) with a transfer speed of 5 megabits per second, and a 2-100ms user selectable update time on the network. The PLC-5-80C has 99 maximum nodes with a repeater, with 1000m cable link length with 2 nodes and 250m with 48 nodes, and the maximum cable link length with a repeater is 6000m with 2 nodes. The module has communication ports for DH+ and remote I/O networks with transmission rates of 57.6K bit/s, 115.2K bits/s, and 230.4K bits/s, and has a standard I/O scan time of 10ms at 57.6K bits/s to 3ms at 230.4K bits/s. The PLC-5-80C is CE, UL, CSA, and C-TICK-certified and weighs approximately 3 pounds with an open enclosure.



Repair Services for PLC-5-80C

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your PLC-5-80C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for PLC-5-80C

Please refer to the manual for more information about the PLC-5-80C such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
PLC-5-80C Ser A
PLC-5-80C/A, Series A, Rev A Request Quote
Common misspellings:
  • P1C-5-80C
  • PLC-5-b0C
  • PLC-5-8oC
  • PLC580C

Dimensions For PLC-5-80C

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For PLC-5-80C

Resolutions For PLC-5-80C

About

Technical Specifications for PLC-5-80C

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.PLC-5-80C
Module TypeControlNet PLC-5 Processor
Cat Number1785-L80C
Max User Memory Words100 Kilowords
Battery-Backed Static RAMYes
EEPROM Program Backup Option (using 1785-ME16, -ME32, -ME64, and -M100)Yes
Protected MemoryNo
Max Total I/OForcible 3072 (any mix) or 3072 in + 3072 out (complementary), Nonforcible 50176
Max Analog I/OForcible 3072 and Nonforcible 50176
I/O Scan Time Per RackControlNet I/O 0.5 ms (average); Universal Remote I/O 10 ms at 57.6 kbits/s, 7 ms at 115.2 kbits/s, 3 ms at 230.4 mbits/s
Max I/O Chassis Total125
Max I/O Chassis Extended Local0
Max I/O Chassis Universal Remote60
RS-232-C/422-A/423- A Ports1
Control Coprocessor Expansion PortYes
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.PLC-5-80C
Module TypeControlNet PLC-5 Processor
Cat Number1785-L80C
Max User Memory Words100 Kilowords
Battery-Backed Static RAMYes
EEPROM Program Backup Option (using 1785-ME16, -ME32, -ME64, and -M100)Yes
Protected MemoryNo
Max Total I/OForcible 3072 (any mix) or 3072 in + 3072 out (complementary), Nonforcible 50176
Max Analog I/OForcible 3072 and Nonforcible 50176
I/O Scan Time Per RackControlNet I/O 0.5 ms (average); Universal Remote I/O 10 ms at 57.6 kbits/s, 7 ms at 115.2 kbits/s, 3 ms at 230.4 mbits/s
Max I/O Chassis Total125
Max I/O Chassis Extended Local0
Max I/O Chassis Universal Remote60
RS-232-C/422-A/423- A Ports1
Control Coprocessor Expansion PortYes

About PLC-5-80C

The PLC-5-80C (1785-L80C) ControlNet Programmable Controller by Allen-Bradley is a 100K word programmable controller installed on the 1771 I/O chassis which directs the processes of field devices and has a maximum I/O capacity of 3072. The module requires a backplane current of 3.3A at 5V DC and it has a maximum heat dissipation of 59 BTU/hour when operational. The controller is designed to function without de-rating at a temperature range between 0 and 60 oC (32 and 140 oF) at a relative humidity range of 5-95% without condensation and it is IEC-tested and rated to withstand 2G of operational vibration at 10-500Hz and a 30G operational shock. The PLC-5-80C supports the use of the ControlNet hot backup cartridge (1785-CHBM), a battery module (1770-XYC), and a battery-backed memory module (either 1785-ME32, 1785-ME64 or 1785-M100). The PLC-5-80C is designed to be compatible with the 1771 intelligent, 8, 16, and 32-point I/O modules, and address I/O modules through the 2-slot, 1-slot, and ½-slot addressing modes.





The PLC-5-80C has an internal circuit clock/calendar with ±5 min per month accuracy variation at 60 oC, with a timing accuracy of 1 program scan, and has a program scan time of 0.5ms per K word (in bit logic), and 2ms per K word. The controller has an RJ-45 type ControlNet Network Access Port (NAP) with a transfer speed of 5 megabits per second, and a 2-100ms user selectable update time on the network. The PLC-5-80C has 99 maximum nodes with a repeater, with 1000m cable link length with 2 nodes and 250m with 48 nodes, and the maximum cable link length with a repeater is 6000m with 2 nodes. The module has communication ports for DH+ and remote I/O networks with transmission rates of 57.6K bit/s, 115.2K bits/s, and 230.4K bits/s, and has a standard I/O scan time of 10ms at 57.6K bits/s to 3ms at 230.4K bits/s. The PLC-5-80C is CE, UL, CSA, and C-TICK-certified and weighs approximately 3 pounds with an open enclosure.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your PLC-5-80C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your PLC-5-80C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the PLC-5-80C such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
PLC-5-80C Ser A
PLC-5-80C/A, Series A, Rev A Request Quote

Common misspellings:
  • P1C-5-80C
  • PLC-5-b0C
  • PLC-5-8oC
  • PLC580C
PDF