DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The Allen-Bradley 1734-ARM is a POINT I/O ARM Module. It has 75 milliamps POINTBus Current and a Thermal Dissipation of 0.375 Watts with an Power Dissipation, Max of 1.3 BTU/hour.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1734-ARM. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-ARM |
Series | POINT I/O |
Module Type | ARM Module |
POINTBus Current | 75 milliamps |
Thermal Dissipation | 0.375 Watts |
Power Dissipation, Max | 1.3 BTU/hour |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-ARM |
Series | POINT I/O |
Module Type | ARM Module |
POINTBus Current | 75 milliamps |
Thermal Dissipation | 0.375 Watts |
Power Dissipation, Max | 1.3 BTU/hour |
The Allen-Bradley 1734-ARM is an address reserve module that maintains the numbering schemes of purchased I/O modules by reserving the addresses and slot numbers of the modules. It is part of the POINT I/O Family of digital and analog modules. The structure and address of non-parameterized signal modules are replaced by a signal module and retained. Without module configuration, this module does not communicate the I/O data. The 1734-ARM is designed to simplify system engineering and inventory and reduce operating costs. It is flexible and can be applied to control and automation systems.
The module has no designated key switch position and can be installed in any slot with any key position. It saves a node address for later insertion. The user can install the 1734-ARM before or after mounting the base. Make sure that the mounting base on the DIN rail is keyed accurately. The 1734-ARM Module requires a 1734-TB or -TBS wiring base assembly. It has a maximum point bus current of 75 mA, a power dissipation of 0.375 W, and a thermal dissipation of 1.3 BTU/hour maximum at 5 Volts DC. It has green/red logic side status indicators – one each for the network and the module. For optimal performance, make sure that operational temperature stays between -20 and 55 degrees Celsius (-4 and 131 degrees Fahrenheit) and that the relative humidity does not exceed 95%, noncondensing.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-ARM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734-ARM such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734-ARM Ser A
|
1734-ARM/A, Series A, Rev A | Request Quote |
1734-ARM Ser B
|
1734-ARM/B, Series B, Rev B | Request Quote |
1734-ARM Ser C
|
1734-ARM/C, Series C, Rev C | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-ARM |
Series | POINT I/O |
Module Type | ARM Module |
POINTBus Current | 75 milliamps |
Thermal Dissipation | 0.375 Watts |
Power Dissipation, Max | 1.3 BTU/hour |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-ARM |
Series | POINT I/O |
Module Type | ARM Module |
POINTBus Current | 75 milliamps |
Thermal Dissipation | 0.375 Watts |
Power Dissipation, Max | 1.3 BTU/hour |
The Allen-Bradley 1734-ARM is an address reserve module that maintains the numbering schemes of purchased I/O modules by reserving the addresses and slot numbers of the modules. It is part of the POINT I/O Family of digital and analog modules. The structure and address of non-parameterized signal modules are replaced by a signal module and retained. Without module configuration, this module does not communicate the I/O data. The 1734-ARM is designed to simplify system engineering and inventory and reduce operating costs. It is flexible and can be applied to control and automation systems.
The module has no designated key switch position and can be installed in any slot with any key position. It saves a node address for later insertion. The user can install the 1734-ARM before or after mounting the base. Make sure that the mounting base on the DIN rail is keyed accurately. The 1734-ARM Module requires a 1734-TB or -TBS wiring base assembly. It has a maximum point bus current of 75 mA, a power dissipation of 0.375 W, and a thermal dissipation of 1.3 BTU/hour maximum at 5 Volts DC. It has green/red logic side status indicators – one each for the network and the module. For optimal performance, make sure that operational temperature stays between -20 and 55 degrees Celsius (-4 and 131 degrees Fahrenheit) and that the relative humidity does not exceed 95%, noncondensing.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-ARM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-ARM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734-ARM such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734-ARM Ser A
|
1734-ARM/A, Series A, Rev A | Request Quote |
1734-ARM Ser B
|
1734-ARM/B, Series B, Rev B | Request Quote |
1734-ARM Ser C
|
1734-ARM/C, Series C, Rev C | Request Quote |