The 1734-IB8S is an Allen-Bradley manufactured module used in applications with Safety Instrumentation Level (SIL) requirements. This module is a POINT Guard IO Safety module with Eight (8) Current Sinking Input Channel and Four (4) pulse Current Sourcing Pulse Test Outputs.

This module is typically used in applications that perform safety applications such as Emergency Stop Push Button, Gate Switches, Light Curtains and other safety devices may be connected to this module. It features a channel with Dual-channel mode capability for evaluating consistency of Two (2) input signals which enables the module to be used in applications that with Safety Category 3 and 4.

The 1734-IB8S may also be used in Single-Channel mode. This mode evaluates single signal which then allows the module to be used in application with Safety Category 2.

It has a configurable discrepancy time, that is used to determine the acceptable discrepant time between 2 channels before a fault is declared by the module. It also has an external wiring short check that is enables when input channels are wired in combination with test outputs. Each channel of this safety module has individually adjustable ON and OFF signal delay which is used to prevent false positive and false negative readings caused by signal fluctuation.

The 1734-IB8S has a maximum thermal dissipation of 11.62 BTU/hour and it weighs 62.4 grams or 2.2 ounces. It has a nominal input voltage of 24 Volts DC, an input current maximum of 175 mA, and a 3.4 W maximum power dissipation. The 1734-IB8S works with SmartGuard, GuardLogix, and Compact GuardLogix controllers and it is used in POINT I/O platforms to administer CIP safety protocol extensions. The 1734-IB8S operates at 19.2 to 28.8 Volts DC. It also has a maximum power bus current (no load) of 25 mA, and a continuous isolation voltage of 50 Volts.

The 1734-IB8S measures 77 x 25 x 55 millimeters or 3.03 x 0.98 x 2.17 inches, and it has 8 inputs per module and a current sinking input type with each channel having a 16.2 milliseconds reaction time. The 1734-IB8S module is available in Series A and B. It has an open-style enclosure type and can be mounted horizontally or vertically. The 1734-IB8S can communicate over Ethernet/IP and DeviceNet networks via the 1734-AENT, 1734-AENTR, or 1734-PDN network adapters.

What is the price of a 1734-IB8S POINT Guard I/O Safety Module?

Submit a quote request, send us an email, or call 800-730-0292 for our best price.

How many LED indicators come on this Module?

There are 10 total LED indicators. It has the following indicators: 1 Yellow lock status, 1 Yellow/Green power status, and 8 I/O Channel status LEDs.

What are the dimensions of the 1734-IB8S ?

The dimensions without the terminal block installed are 77 x 25 x 55 mm (HxWxD)

What is the 1734-IB8S Guard I/O Safety Module pilot duty rating?

1734-IB8S Guard I/O Safety Module does not have a pilot duty rating.

Can this module be purchased with a warranty?

Yes, the 1734-IB8S comes with a free one-year warranty from DO Supply, Inc.

Does 1734-IB8S Guard I/O Safety Module require a separate power supply?

A separate power supply for 1734-IB8S Guard I/O Safety Module is optional, not required.

Where can I find repair services for the 1734-IB8S POINT Guard I/O Safety Module?

DO Supply offers a variety repair services for a variety of Allen-Bradley products, such as the 1734-IB8S.

Does 1734-IB8S Guard I/O Safety Module has short circuit protection.

Yes, 1734-IB8S Guard I/O Safety Module has short circuit protection.

What is the difference between Ser A and Ser B of the 1734-IB8S?

The POINTbus current max is 110mA for Series B and 175mA for Series A. The power dissipation max is 3.0 W for Series B and 3.4 W for Series A. The thermal dissipation is 10.25 BTU/HR for Ser B and 11.62 BTU/HR for Ser A.

What does the Red LED indicator mean on the 1734-IB8S?

A solid red light indicates that either there is a fault in the external wiring or that an input circuit is being detected.

What does a flashing red indicator light mean?

When the LED indicator on the 1734-IB8S is flashing red, this means that there is a fault detected in the partner input circuit.