Preowned
Includes a 1-Year DO Supply warranty.
DO Supply is not an authorized distributor for Allen Bradley.
The Allen-Bradley 1734-IE4S is a POINT I/O Safety Analog Input Module. It has 4 single-ended/module Inputs and a Input Type of Voltage, Current, or Tachometer with an Modes of Bipolar or Unipolar. This Safety Analog Input Module has an .
Preowned
Includes a 1-Year DO Supply warranty.
DO Supply is not an authorized distributor for Allen Bradley.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via DHL, UPS, Fedex, and TNT |
Repairs: | We offer repair service for the 1734-IE4S. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-IE4S |
Series | POINT I/O |
Module Type | Safety Analog Input Module |
Inputs | 4 single-ended/module |
Input Type | Voltage, Current, or Tachometer |
Modes | Bipolar or Unipolar |
ADC Resolution | 12 bits |
UPC | 10885630078578 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-IE4S |
Series | POINT I/O |
Module Type | Safety Analog Input Module |
Inputs | 4 single-ended/module |
Input Type | Voltage, Current, or Tachometer |
Modes | Bipolar or Unipolar |
ADC Resolution | 12 bits |
UPC | 10885630078578 |
The 1734-IE4S is an Allen-Bradley POINT I/O Safety Analog Input Module. This module has 4 single-ended/module inputs and a voltage, current, or a tachometer input type with a bipolar or unipolar.mode. This safety analog input module can connect with up to 4 voltage or current sensors. Note that if you are using more than 1 power source with the 1734-IE4S, make sure that you do not exceed its specified maximum isolation voltage. The sensor power outputs on this module are individually current-limited and monitored.
The 1734-IE4S module supports dual-channel equivalent mode. To use this mode, configure the 1734-IE4S for single-channel operation, then the analog input pairs will be evaluated as pairs. It can run on version 21 of the Studio 5000 Environment software, on version 18 of the RSLogix 5000 software over the EtherNet/IP network, or on version 10 of the RSNetWorx software over the DeviceNet Network. The 1734-IE4S input module needs the field power to be applied to it when it is updating its firmware. The 1734-IE4S’s tachometer code range is 0 to 1000, its current code range at 4 to 20 mA is -8192 to 32767, and its voltage code range is -32768 to 32767 in bipolar mode and it is 0 to 32767 in the unipolar mode. The tachometer frequency range is 1 to 1000 Hertz and the over range threshold is 1 kHz. The current over range threshold is 20 mA at 0 to 20 mA and 4 to 20 mA and the current underage threshold is 0.5 mA at 0 to 20 mA and 4 mA at 4 to 20 mA. The voltage over range threshold is 10 Volts at 0 to 10 Volts and it is 5 Volts at 0 to 5 Volts. The voltage under range threshold is 0.5 Volts at 0 to 10 Vols and it is 0.25 Volts at 0 to 5 Volts.
How many inputs does the 1734-IE4S have?
The 1734-IE4S has 4 single-ended inputs.
What is the weight of the 1734-IE4S?
The 1734-IE4S weighs 68 grams.
What is the price of a 1734-IE4S Allen Bradley POINT I/O Safety Analog Input Module?
Submit quote request, send us an email, or call 800-730-0292 for our best price.
Does DO Supply offer repair services for the 1734-IE4S Allen Bradley POINT I/O Safety Analog Input Module?
Yes, DO Supply offers repair services for a variety of Allen-Bradley products, such as the 1734-IE4S. For more information or to request a repair quote, please click here.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-IE4S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734-IE4S such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734-IE4S Ser A
|
1734-IE4S/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-IE4S |
Series | POINT I/O |
Module Type | Safety Analog Input Module |
Inputs | 4 single-ended/module |
Input Type | Voltage, Current, or Tachometer |
Modes | Bipolar or Unipolar |
ADC Resolution | 12 bits |
UPC | 10885630078578 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-IE4S |
Series | POINT I/O |
Module Type | Safety Analog Input Module |
Inputs | 4 single-ended/module |
Input Type | Voltage, Current, or Tachometer |
Modes | Bipolar or Unipolar |
ADC Resolution | 12 bits |
UPC | 10885630078578 |
The 1734-IE4S is an Allen-Bradley POINT I/O Safety Analog Input Module. This module has 4 single-ended/module inputs and a voltage, current, or a tachometer input type with a bipolar or unipolar.mode. This safety analog input module can connect with up to 4 voltage or current sensors. Note that if you are using more than 1 power source with the 1734-IE4S, make sure that you do not exceed its specified maximum isolation voltage. The sensor power outputs on this module are individually current-limited and monitored.
The 1734-IE4S module supports dual-channel equivalent mode. To use this mode, configure the 1734-IE4S for single-channel operation, then the analog input pairs will be evaluated as pairs. It can run on version 21 of the Studio 5000 Environment software, on version 18 of the RSLogix 5000 software over the EtherNet/IP network, or on version 10 of the RSNetWorx software over the DeviceNet Network. The 1734-IE4S input module needs the field power to be applied to it when it is updating its firmware. The 1734-IE4S’s tachometer code range is 0 to 1000, its current code range at 4 to 20 mA is -8192 to 32767, and its voltage code range is -32768 to 32767 in bipolar mode and it is 0 to 32767 in the unipolar mode. The tachometer frequency range is 1 to 1000 Hertz and the over range threshold is 1 kHz. The current over range threshold is 20 mA at 0 to 20 mA and 4 to 20 mA and the current underage threshold is 0.5 mA at 0 to 20 mA and 4 mA at 4 to 20 mA. The voltage over range threshold is 10 Volts at 0 to 10 Volts and it is 5 Volts at 0 to 5 Volts. The voltage under range threshold is 0.5 Volts at 0 to 10 Vols and it is 0.25 Volts at 0 to 5 Volts.
How many inputs does the 1734-IE4S have?
The 1734-IE4S has 4 single-ended inputs.
What is the weight of the 1734-IE4S?
The 1734-IE4S weighs 68 grams.
What is the price of a 1734-IE4S Allen Bradley POINT I/O Safety Analog Input Module?
Submit quote request, send us an email, or call 800-730-0292 for our best price.
Does DO Supply offer repair services for the 1734-IE4S Allen Bradley POINT I/O Safety Analog Input Module?
Yes, DO Supply offers repair services for a variety of Allen-Bradley products, such as the 1734-IE4S. For more information or to request a repair quote, please click here.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-IE4S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-IE4S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734-IE4S such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734-IE4S Ser A
|
1734-IE4S/A, Series A, Rev A | Request Quote |