1734-IV2 - In Stock | Allen Bradley PLC Point I/O 1734

1734-IV2

Rated 4.3 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1734-IV2

Revisions: Ser A Ser B Ser C 
Description: The 1734-IV2 input module is a source input module. It has been designed and manufactured by Allen-Bradley/Rockwell Automation Point I/O 1734 series. The 1734-IV2 source input module is a very small and compact input module and it only has 2 input channels. It can be installed on a mounting base that has its keyswitch set in position 1. The 1734-IV2 2-channel source input module can receive messages that are up to 1 Byte in size.
In Stock Ships Today
Request a quote for 1734-IV2

Description: The 1734-IV2 input module is a source input module. It has been designed and manufactured by Allen-Bradley/Rockwell Automation Point I/O 1734 series. The 1734-IV2 source input module is a very small and compact input module and it only has 2 input channels. It can be installed on a mounting base that has its keyswitch set in position 1. The 1734-IV2 2-channel source input module can receive messages that are up to 1 Byte in size.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B Ser C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1734-IV2.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 18 reviews

    Technical Specifications for 1734-IV2

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1734-IV2
SeriesPOINT I/O
Module TypeDigital DC Sourcing Input Module
Inputs2
Input Voltage24 Volts DC
Input Current Maximum5 milliamps
POINTBus Current75 milliamps
Power Dissipation0.7 Watts
Power Dissipation2.4 BTU/hour
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1734-IV2
SeriesPOINT I/O
Module TypeDigital DC Sourcing Input Module
Inputs2
Input Voltage24 Volts DC
Input Current Maximum5 milliamps
POINTBus Current75 milliamps
Power Dissipation0.7 Watts
Power Dissipation2.4 BTU/hour
s

About 1734-IV2

The Allen-Bradley 1734-IV2 is a POINT digital DC input module. Two input points are available with this module and they are together in a group. It also has 2 yellow input status indicators, 1 green/red network status indicator, and 1 green/red module status indicator. The keyswitch position of the 1734-IV2 is 1 and the whole module measures 2.21 x 0.47 x 2.97 inches. Its compact size lets users mount it horizontally or vertically on a DIN rail or in small spaces. Note that users can only use a 1734-TB or 1739-TBS terminal base unit and 22 to 141 AWG stranded or solid copper wire with this module. It also comes with an open-type enclosure.



The 1734-IV2 has a surge transient immunity of +/-1 kV line to line and +/-2 kV line to earth (CM) on signal ports. Its maximum thermal dissipation is 3.4 BTU/hour at 28.8 Volts DC and its maximum power dissipation is 1 W at 28.8 Volts DC. The input delay time of this module is 0.5 milliseconds hardware plus user-selectable time, which ranges from 0 to 65 milliseconds. Its operating temperature is from -20 to 55 degrees Celsius and its non-operating temperature is from -40 to 85 degrees Celsius. The operating shock is 30 g while the non-operating shock is 50 g. The 1734-IV2’s operating vibration is 5 g at 10 to 500 Hertz and its non-condensing relative humidity is 5 to 95%. The maximum POINT bus current of the 1734-IV2 is 75 mA at 5 Volts DC and its nominal input voltage is 24 Volts DC. Its on-state input voltage ranges from 10 to 28.8 Volts DC, while its on-state input current ranges from a minimum of 2 mA to 5 mA. The 1734-IV2 also has a maximum input current of 1.5 mA in off-state.



Technical Description of 1734-IV2

The Allen-Bradley 1734-IV2 is a POINT I/O Digital DC Sourcing Input Module. It has 2 Inputs and an Input Voltage of 24 Volts DC with an Input Current Maximum of 5 milliamps. This Digital DC Sourcing Input Module has a 0.7 Watts Power Dissipation.

Repair Services for 1734-IV2

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1734-IV2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1734-IV2

Please refer to the manual for more information about the 1734-IV2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1734-IV2 Ser A
1734-IV2/A, Series A, Rev A Request Quote
1734-IV2 Ser B
1734-IV2/B, Series B, Rev B Request Quote
1734-IV2 Ser C
1734-IV2/C, Series C, Rev C Request Quote
Common misspellings:
  • l734-IV2
  • 173A-IV2
  • 1734IV2

Dimensions For 1734-IV2

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1734-IV2

Resolutions For 1734-IV2

Why Buy From Do Supply Inc?
  • 1 Year Do Supply Warranty on most products

  • Fast and convenient shipping

  • Large inventory of over 20,000 items

  • Great low prices on all conditions

  • Extensive quality control and testing
About

Technical Specifications for 1734-IV2

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1734-IV2
SeriesPOINT I/O
Module TypeDigital DC Sourcing Input Module
Inputs2
Input Voltage24 Volts DC
Input Current Maximum5 milliamps
POINTBus Current75 milliamps
Power Dissipation0.7 Watts
Power Dissipation2.4 BTU/hour
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1734-IV2
SeriesPOINT I/O
Module TypeDigital DC Sourcing Input Module
Inputs2
Input Voltage24 Volts DC
Input Current Maximum5 milliamps
POINTBus Current75 milliamps
Power Dissipation0.7 Watts
Power Dissipation2.4 BTU/hour

About 1734-IV2

The Allen-Bradley 1734-IV2 is a POINT digital DC input module. Two input points are available with this module and they are together in a group. It also has 2 yellow input status indicators, 1 green/red network status indicator, and 1 green/red module status indicator. The keyswitch position of the 1734-IV2 is 1 and the whole module measures 2.21 x 0.47 x 2.97 inches. Its compact size lets users mount it horizontally or vertically on a DIN rail or in small spaces. Note that users can only use a 1734-TB or 1739-TBS terminal base unit and 22 to 141 AWG stranded or solid copper wire with this module. It also comes with an open-type enclosure.



The 1734-IV2 has a surge transient immunity of +/-1 kV line to line and +/-2 kV line to earth (CM) on signal ports. Its maximum thermal dissipation is 3.4 BTU/hour at 28.8 Volts DC and its maximum power dissipation is 1 W at 28.8 Volts DC. The input delay time of this module is 0.5 milliseconds hardware plus user-selectable time, which ranges from 0 to 65 milliseconds. Its operating temperature is from -20 to 55 degrees Celsius and its non-operating temperature is from -40 to 85 degrees Celsius. The operating shock is 30 g while the non-operating shock is 50 g. The 1734-IV2’s operating vibration is 5 g at 10 to 500 Hertz and its non-condensing relative humidity is 5 to 95%. The maximum POINT bus current of the 1734-IV2 is 75 mA at 5 Volts DC and its nominal input voltage is 24 Volts DC. Its on-state input voltage ranges from 10 to 28.8 Volts DC, while its on-state input current ranges from a minimum of 2 mA to 5 mA. The 1734-IV2 also has a maximum input current of 1.5 mA in off-state.



Technical Description of 1734-IV2

The Allen-Bradley 1734-IV2 is a POINT I/O Digital DC Sourcing Input Module. It has 2 Inputs and an Input Voltage of 24 Volts DC with an Input Current Maximum of 5 milliamps. This Digital DC Sourcing Input Module has a 0.7 Watts Power Dissipation.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1734-IV2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1734-IV2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1734-IV2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1734-IV2 Ser A
1734-IV2/A, Series A, Rev A Request Quote
1734-IV2 Ser B
1734-IV2/B, Series B, Rev B Request Quote
1734-IV2 Ser C
1734-IV2/C, Series C, Rev C Request Quote

Common misspellings:
  • l734-IV2
  • 173A-IV2
  • 1734IV2
PDF
Why Buy From Do Supply Inc?
  • 1 Year Do Supply Warranty on most products

  • Fast and convenient shipping

  • Large inventory of over 20,000 items

  • Great low prices on all conditions

  • Extensive quality control and testing