DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The Allen-Bradley 1734-OA4 is a POINT I/O Digital AC Output Module. It has 4 Outputs and an Output Voltage of 120 or 220 Volts AC with an Output Current of 2 Amps Total. This Digital AC Output Module has 3.5 Watts Maximum Power Dissipation.
The Allen-Bradley 1734-OA4 is a POINT I/O Digital AC Output Module. It has 4 Outputs and an Output Voltage of 120 or 220 Volts AC with an Output Current of 2 Amps Total. This Digital AC Output Module has 3.5 Watts Maximum Power Dissipation.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1734-OA4. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-OA4 |
Series | POINT I/O |
Module Type | Digital AC Output Module |
Outputs | 4 |
Output Voltage | 120 or 220 Volts AC |
Output Current | 2 Amps Total |
POINTBus Current | 75 milliamps |
Power Dissipation | 3.5 Watts Maximum |
Thermal Dissipation | 11.69 BTU Maximum |
On-state Voltage | 74 Volts AC |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-OA4 |
Series | POINT I/O |
Module Type | Digital AC Output Module |
Outputs | 4 |
Output Voltage | 120 or 220 Volts AC |
Output Current | 2 Amps Total |
POINTBus Current | 75 milliamps |
Power Dissipation | 3.5 Watts Maximum |
Thermal Dissipation | 11.69 BTU Maximum |
On-state Voltage | 74 Volts AC |
The 1734-OA4 120 to 240 Volts AC output module by Allen-Bradley is a digital POINT I/O module with 4 sourcing, non-isolated outputs with 0.75 Amps per channel sourcing voltage. The 1734-OA4 can be used with DeviceNet and a PROFIBUS adapter for enhanced network capability and data sharing. Additionally, ControlNet and EtherNet/IP adapters can also be used with the 1734-OA4. It has a distinct on-state voltage of 74 Volts AC which can go through a range of 120 to 240 Volts AC and it maxes out at 264 Volts AC. Consequently, it has a maximum drop voltage of 1.0 Volts AC at 0.75 Amps with an on-state current of 10mA per channel which maxes out at 750mA per channel and 2 Amps per module.
The 1734-OA4 has an output current rating of 750 mA per channel and 2 Amps per module, with a leakage current of 2.7 mA at 264 Volts AC. The 1734-OA4’s maximum output of 2 Amps per module at a temperature limit of 113 degrees Fahrenheit, but it will derate uniformly at 30% to 1.4 Amps per module at any temperature above 131 degrees Fahrenheit. It has a surge current of 16 Amps for 100 milliseconds that is repeatable every 10 seconds. The 1734-OA4 module is installed on the base wiring assembly and it has a POINT BUS current of 75 mA at 5 Volts DC. It has a maximum power dissipation of 3.2 Watts at 264 Volts AC and a thermal dissipation of 11.9 BTU/hour at 264 Volts AC. The 1734-OA4’s approximate dimensions are 2.21 x 0.47 x 2.97 inches and its approximate weight is 1.09 ounces.
What is this module’s power dissipation?
The 1734-OA4 dissipates a maximum of 3.5 Watts of power.
What type of module is this unit?
The 1734-OA4 is a POINT I/O Digital AC Output module.
What is this module’s heat dissipation?
The 1734-OA4 has a heat dissipation around 11.69 BTU.
What is this module’s output voltage?
The 1734-OA4 has an output voltage of 120 to 220 Volts AC.
Can this module be purchased with a warranty?
Yes, the 1734-OA4 comes with a free one-year warranty from DO Supply, Inc.
Where can I send the 1734-OA4 to be repaired?
DO Supply, Inc. offers a variety of repair services for the 1734-OA4.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $197 | ![]() |
Our highly skilled technicians can repair your 1734-OA4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734-OA4 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734-OA4 Ser A
|
1734-OA4/A, Series A, Rev A | Request Quote |
1734-OA4 Ser B
|
1734-OA4/B, Series B, Rev B | Request Quote |
1734-OA4 Ser C
|
1734-OA4/C, Series C, Rev C | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-OA4 |
Series | POINT I/O |
Module Type | Digital AC Output Module |
Outputs | 4 |
Output Voltage | 120 or 220 Volts AC |
Output Current | 2 Amps Total |
POINTBus Current | 75 milliamps |
Power Dissipation | 3.5 Watts Maximum |
Thermal Dissipation | 11.69 BTU Maximum |
On-state Voltage | 74 Volts AC |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-OA4 |
Series | POINT I/O |
Module Type | Digital AC Output Module |
Outputs | 4 |
Output Voltage | 120 or 220 Volts AC |
Output Current | 2 Amps Total |
POINTBus Current | 75 milliamps |
Power Dissipation | 3.5 Watts Maximum |
Thermal Dissipation | 11.69 BTU Maximum |
On-state Voltage | 74 Volts AC |
The 1734-OA4 120 to 240 Volts AC output module by Allen-Bradley is a digital POINT I/O module with 4 sourcing, non-isolated outputs with 0.75 Amps per channel sourcing voltage. The 1734-OA4 can be used with DeviceNet and a PROFIBUS adapter for enhanced network capability and data sharing. Additionally, ControlNet and EtherNet/IP adapters can also be used with the 1734-OA4. It has a distinct on-state voltage of 74 Volts AC which can go through a range of 120 to 240 Volts AC and it maxes out at 264 Volts AC. Consequently, it has a maximum drop voltage of 1.0 Volts AC at 0.75 Amps with an on-state current of 10mA per channel which maxes out at 750mA per channel and 2 Amps per module.
The 1734-OA4 has an output current rating of 750 mA per channel and 2 Amps per module, with a leakage current of 2.7 mA at 264 Volts AC. The 1734-OA4’s maximum output of 2 Amps per module at a temperature limit of 113 degrees Fahrenheit, but it will derate uniformly at 30% to 1.4 Amps per module at any temperature above 131 degrees Fahrenheit. It has a surge current of 16 Amps for 100 milliseconds that is repeatable every 10 seconds. The 1734-OA4 module is installed on the base wiring assembly and it has a POINT BUS current of 75 mA at 5 Volts DC. It has a maximum power dissipation of 3.2 Watts at 264 Volts AC and a thermal dissipation of 11.9 BTU/hour at 264 Volts AC. The 1734-OA4’s approximate dimensions are 2.21 x 0.47 x 2.97 inches and its approximate weight is 1.09 ounces.
What is this module’s power dissipation?
The 1734-OA4 dissipates a maximum of 3.5 Watts of power.
What type of module is this unit?
The 1734-OA4 is a POINT I/O Digital AC Output module.
What is this module’s heat dissipation?
The 1734-OA4 has a heat dissipation around 11.69 BTU.
What is this module’s output voltage?
The 1734-OA4 has an output voltage of 120 to 220 Volts AC.
Can this module be purchased with a warranty?
Yes, the 1734-OA4 comes with a free one-year warranty from DO Supply, Inc.
Where can I send the 1734-OA4 to be repaired?
DO Supply, Inc. offers a variety of repair services for the 1734-OA4.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $197 | ![]() |
Our highly skilled technicians can repair your 1734-OA4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $197 | ![]() |
Our highly skilled technicians can repair your 1734-OA4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734-OA4 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734-OA4 Ser A
|
1734-OA4/A, Series A, Rev A | Request Quote |
1734-OA4 Ser B
|
1734-OA4/B, Series B, Rev B | Request Quote |
1734-OA4 Ser C
|
1734-OA4/C, Series C, Rev C | Request Quote |