DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The 1734-OW2 module is an Allen-Bradley relay output module which is available from the Allen-Bradley Point I/O 1734 series of input and output modules. This relay output module is engineered to be slim and compact and it has only 2 output channels. The 1734-OW2 relay output module is a Type A output module that has normally open contacts. It can be mounted securely on a mounting base that has its keyswitch set to position 7. It is important to note that the normally open relay contacts in the 1734-OW2 relay output module are not powered by the system?s internal power bus.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1734-OW2. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-OW2 |
Series | POINT I/O |
Module Type | Digital Contact Module |
Outputs | 2 N.O relay |
POINTBus Current | 80 milliamps |
Power Dissipation, Max | 0.5 Watts |
Thermal Dissipation | 1.7 BTU/hour |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-OW2 |
Series | POINT I/O |
Module Type | Digital Contact Module |
Outputs | 2 N.O relay |
POINTBus Current | 80 milliamps |
Power Dissipation, Max | 0.5 Watts |
Thermal Dissipation | 1.7 BTU/hour |
The 1734-OW2 POINT I/O 2 Relay Output Module is a member of the digital I/O module series which provides voltage interface and field-side diagnostics. It is a 2-form, open electromechanical relay with an OFF-STATE leakage current of 1.2mA at 240V AC via a unique bleed resistor installed in a snubber circuit. The 1734-OW2 has two relay outputs with a 26ms delay time between OFF-state and ON-state. It has a thermal dissipation of 1.7 BTU/hr at 0.5W, with a capacitance of 30mΩ. It has a POINT BUS current of 100mA at 5V, and the module fits on either the 1734-TB or –TBS base assembly. The 1734-OW2 has 2 N.O relay outputs and a POINT Bus current of 80 milliamps with a maximum power dissipation of 0.5 Watts.
It has dimensions of 56.0mm x 12.0mm x 75.5mm (2.21in x 0.47in x 2.97in), and weighs approximately 32.6g (1.15oz). The 1734-OW2 POINT I/O 2 Relay Output has a CISPR 11, Group 1, Class A emission rating, and an IEC 60068-2-27 tested and certified shock rating at 30G, and a maximum vibration of 5G at 10-500Hz. It operates optimally at an ambient temperature range between -20 and 55 °C (-4 and 131 °F), at IEC 60068-2-30 tested at a 5-95% relative humidity. The 1734-OW2 has a contact rating of 120-240V AC at 2A and an expected electrical contact half-life per minute of 100,000 cycles. The 1734-OW2 POINT has 1-on signal port wiring category, with 0.25 by 2.5 mm2 (22 by 14 AWG) stranded copper wire rated at 85 ° C with a 1.2mm (3/64 in.) wire insulation.
The Allen-Bradley 1734-OW2 is a POINT I/O Digital Contact Module. It has 2 N.O relay Outputs and a POINTBus Current of 80 milliamps with a Power Dissipation, Max of 0.5 Watts.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-OW2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734-OW2 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734-OW2 Ser A
|
1734-OW2/A, Series A, Rev A | Request Quote |
1734-OW2 Ser B
|
1734-OW2/B, Series B, Rev B | Request Quote |
1734-OW2 Ser C
|
1734-OW2/C, Series C, Rev C | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-OW2 |
Series | POINT I/O |
Module Type | Digital Contact Module |
Outputs | 2 N.O relay |
POINTBus Current | 80 milliamps |
Power Dissipation, Max | 0.5 Watts |
Thermal Dissipation | 1.7 BTU/hour |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-OW2 |
Series | POINT I/O |
Module Type | Digital Contact Module |
Outputs | 2 N.O relay |
POINTBus Current | 80 milliamps |
Power Dissipation, Max | 0.5 Watts |
Thermal Dissipation | 1.7 BTU/hour |
The 1734-OW2 POINT I/O 2 Relay Output Module is a member of the digital I/O module series which provides voltage interface and field-side diagnostics. It is a 2-form, open electromechanical relay with an OFF-STATE leakage current of 1.2mA at 240V AC via a unique bleed resistor installed in a snubber circuit. The 1734-OW2 has two relay outputs with a 26ms delay time between OFF-state and ON-state. It has a thermal dissipation of 1.7 BTU/hr at 0.5W, with a capacitance of 30mΩ. It has a POINT BUS current of 100mA at 5V, and the module fits on either the 1734-TB or –TBS base assembly. The 1734-OW2 has 2 N.O relay outputs and a POINT Bus current of 80 milliamps with a maximum power dissipation of 0.5 Watts.
It has dimensions of 56.0mm x 12.0mm x 75.5mm (2.21in x 0.47in x 2.97in), and weighs approximately 32.6g (1.15oz). The 1734-OW2 POINT I/O 2 Relay Output has a CISPR 11, Group 1, Class A emission rating, and an IEC 60068-2-27 tested and certified shock rating at 30G, and a maximum vibration of 5G at 10-500Hz. It operates optimally at an ambient temperature range between -20 and 55 °C (-4 and 131 °F), at IEC 60068-2-30 tested at a 5-95% relative humidity. The 1734-OW2 has a contact rating of 120-240V AC at 2A and an expected electrical contact half-life per minute of 100,000 cycles. The 1734-OW2 POINT has 1-on signal port wiring category, with 0.25 by 2.5 mm2 (22 by 14 AWG) stranded copper wire rated at 85 ° C with a 1.2mm (3/64 in.) wire insulation.
The Allen-Bradley 1734-OW2 is a POINT I/O Digital Contact Module. It has 2 N.O relay Outputs and a POINTBus Current of 80 milliamps with a Power Dissipation, Max of 0.5 Watts.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-OW2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734-OW2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734-OW2 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734-OW2 Ser A
|
1734-OW2/A, Series A, Rev A | Request Quote |
1734-OW2 Ser B
|
1734-OW2/B, Series B, Rev B | Request Quote |
1734-OW2 Ser C
|
1734-OW2/C, Series C, Rev C | Request Quote |