1734-RTB3S - In Stock | Allen Bradley PLC Point I/O 1734

1734-RTB3S

Rated 4.6 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1734-RTB3S

Revisions: Ser A 
Description: The Allen-Bradley 1734-RTB3S is a POINT I/O Replacement RTB.
In Stock Ships Today
Request a quote for 1734-RTB3S

Description: The Allen-Bradley 1734-RTB3S is a POINT I/O Replacement RTB.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1734-RTB3S.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 14 reviews

    Technical Specifications for 1734-RTB3S

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1734-RTB3S
SeriesPOINT I/O
Module TypeReplacement RTB
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1734-RTB3S
SeriesPOINT I/O
Module TypeReplacement RTB
s

About 1734-RTB3S

The Allen Bradley 1734-RTB3S Point I/O Removable Terminal Block Assembly is a removable mounting base with 12 terminal spring clamps that provide installation as well as a termination point for most Allen Bradley 1734 I/O modules. This terminal base is factory wired and therefore does not require additional wiring; it is mounted directly on a DIN-rail to form an interconnect point for the POINT Bus backplane communication and field power-bus distribution. The 1734-RTB3S has a maximum field supply voltage of 300 Volts, with maximum field supply current of 10 Amperes, a maximum signal termination current of 2.0 Amperes, and a voltage termination of 30 Volts. It has an isolation voltage of 250 Volts between the field-side to the system using Basic Insulation Type tested at 1000 Volt AC for 60 seconds. The 1734-RTB3S has 0.34 to 2.1 millimeter square (22 to 14 AWG) solid or stranded copper wire conductor size, with 1.2-millimeter (0.047-inch) maximum insulation strip length, and it has 12 separate terminal locations which are numbered correctly for field wiring. This module should be installed on a DIN Rail by inserting the opposite end of the terminal base block into the base unit and rotating it into the wiring base with a terminal torque of 0.5 to 0.6 Newton-metre until it locks itself in place. It has an operating temperature range of -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) at a non-condensing relative humidity range of 5 to 95% and a storage temperature limit of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The 1734-RTB3S can withstand a 30G operational shock, and it weighs approximately 87.0 Grams, with a net dimension of 65 x 12 x 160 millimeters.



 



Repair Services for 1734-RTB3S

Type Lead Time Price Action
Repair Service 2-4 weeks $8cartAdd to Cart

Our highly skilled technicians can repair your 1734-RTB3S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1734-RTB3S

Please refer to the manual for more information about the 1734-RTB3S such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1734-RTB3S Ser A
1734-RTB3S/A, Series A, Rev A Request Quote
Common misspellings:
  • l734-RTB3S
  • 173A-RTB3S
  • 1734-RT83S
  • 1734RTB3S

Dimensions For 1734-RTB3S

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1734-RTB3S

Resolutions For 1734-RTB3S

Why Buy From Do Supply Inc?
  • 1 Year Do Supply Warranty on most products

  • Fast and convenient shipping

  • Large inventory of over 20,000 items

  • Great low prices on all conditions

  • Extensive quality control and testing
About

Technical Specifications for 1734-RTB3S

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1734-RTB3S
SeriesPOINT I/O
Module TypeReplacement RTB
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1734-RTB3S
SeriesPOINT I/O
Module TypeReplacement RTB

About 1734-RTB3S

The Allen Bradley 1734-RTB3S Point I/O Removable Terminal Block Assembly is a removable mounting base with 12 terminal spring clamps that provide installation as well as a termination point for most Allen Bradley 1734 I/O modules. This terminal base is factory wired and therefore does not require additional wiring; it is mounted directly on a DIN-rail to form an interconnect point for the POINT Bus backplane communication and field power-bus distribution. The 1734-RTB3S has a maximum field supply voltage of 300 Volts, with maximum field supply current of 10 Amperes, a maximum signal termination current of 2.0 Amperes, and a voltage termination of 30 Volts. It has an isolation voltage of 250 Volts between the field-side to the system using Basic Insulation Type tested at 1000 Volt AC for 60 seconds. The 1734-RTB3S has 0.34 to 2.1 millimeter square (22 to 14 AWG) solid or stranded copper wire conductor size, with 1.2-millimeter (0.047-inch) maximum insulation strip length, and it has 12 separate terminal locations which are numbered correctly for field wiring. This module should be installed on a DIN Rail by inserting the opposite end of the terminal base block into the base unit and rotating it into the wiring base with a terminal torque of 0.5 to 0.6 Newton-metre until it locks itself in place. It has an operating temperature range of -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) at a non-condensing relative humidity range of 5 to 95% and a storage temperature limit of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The 1734-RTB3S can withstand a 30G operational shock, and it weighs approximately 87.0 Grams, with a net dimension of 65 x 12 x 160 millimeters.



 



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $8cartAdd to Cart

Our highly skilled technicians can repair your 1734-RTB3S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $8cartAdd to Cart

Our highly skilled technicians can repair your 1734-RTB3S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1734-RTB3S such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1734-RTB3S Ser A
1734-RTB3S/A, Series A, Rev A Request Quote

Common misspellings:
  • l734-RTB3S
  • 173A-RTB3S
  • 1734-RT83S
  • 1734RTB3S
PDF
Why Buy From Do Supply Inc?
  • 1 Year Do Supply Warranty on most products

  • Fast and convenient shipping

  • Large inventory of over 20,000 items

  • Great low prices on all conditions

  • Extensive quality control and testing