DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1734D-IA8XOA8 is a POINT I/O POINTBlock AC 8 Input Module. It has 120 Volts AC, 60 Hertz External AC Power Supply and a POINTBus Current of 1 amp with a Power Consumption of 8.2 Watts. This POINTBlock AC 8 Input Module has a Power Dissipation of 2 Watts.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1734D-IA8XOA8. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734D-IA8XOA8 |
Series | POINT I/O |
Module Type | POINTBlock AC 8 Input Module |
External AC Power Supply | 120 Volts AC, 60 Hertz |
POINTBus Current | 1 amp |
Power Consumption | 8.2 Watts |
Power Dissipation | 2 Watts |
Dimensions (HxWxL) | 3 x 2.36 x 5.25 inches |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734D-IA8XOA8 |
Series | POINT I/O |
Module Type | POINTBlock AC 8 Input Module |
External AC Power Supply | 120 Volts AC, 60 Hertz |
POINTBus Current | 1 amp |
Power Consumption | 8.2 Watts |
Power Dissipation | 2 Watts |
Dimensions (HxWxL) | 3 x 2.36 x 5.25 inches |
The Allen-Bradley 1734D-IA8XOA8 is an I/O AC point block module which determines the number of I/O modules that will meet user’s application requirements. It is an independent device that is user-friendly and easy to install. Ordinarily, the 1734D-IA8XOA8 will only support 16 I/O modules, but with a point BUS port, it can support an additional 12 modules. Overall, it consumes a maximum power of 8.2W but dissipates 2.0W heat at 24 Volts.
The 1734D-IA8XOA8 has an input voltage of 65 Volts AC (ON MODE) at 5.0 mA and a maximum 43 Volts AC (OFF MODE) at 2.5 Amps. It has an impedance of 17.0 kVA and it requires an external AC voltage supply range of 85 to 132 Volts AC and 120 nominal Volts AC. It also has an input time delay feature of 20 milliseconds. The 1734D-IA8XOA8 has a maximum drop output voltage of 1.2 Volts AC at 0.5 Amps with a maximum leakage current of 2.25 Amps. Its output voltage ranges between 85 and 132 Volts AC and it has a maximum input current of 6 Amps per I/O module. The 1734D-IA8XOA8 has dimensions of 131.6 x 67.4 x 121.8 millimeters and a net weight of 393.41 grams. The 1734D-IA8XOA8 has a -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) storage temperature range and an operational temperature range of -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) at 5-95% non-condensing relative humidity.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734D-IA8XOA8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734D-IA8XOA8 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734D-IA8XOA8 Ser A
|
1734D-IA8XOA8/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734D-IA8XOA8 |
Series | POINT I/O |
Module Type | POINTBlock AC 8 Input Module |
External AC Power Supply | 120 Volts AC, 60 Hertz |
POINTBus Current | 1 amp |
Power Consumption | 8.2 Watts |
Power Dissipation | 2 Watts |
Dimensions (HxWxL) | 3 x 2.36 x 5.25 inches |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734D-IA8XOA8 |
Series | POINT I/O |
Module Type | POINTBlock AC 8 Input Module |
External AC Power Supply | 120 Volts AC, 60 Hertz |
POINTBus Current | 1 amp |
Power Consumption | 8.2 Watts |
Power Dissipation | 2 Watts |
Dimensions (HxWxL) | 3 x 2.36 x 5.25 inches |
The Allen-Bradley 1734D-IA8XOA8 is an I/O AC point block module which determines the number of I/O modules that will meet user’s application requirements. It is an independent device that is user-friendly and easy to install. Ordinarily, the 1734D-IA8XOA8 will only support 16 I/O modules, but with a point BUS port, it can support an additional 12 modules. Overall, it consumes a maximum power of 8.2W but dissipates 2.0W heat at 24 Volts.
The 1734D-IA8XOA8 has an input voltage of 65 Volts AC (ON MODE) at 5.0 mA and a maximum 43 Volts AC (OFF MODE) at 2.5 Amps. It has an impedance of 17.0 kVA and it requires an external AC voltage supply range of 85 to 132 Volts AC and 120 nominal Volts AC. It also has an input time delay feature of 20 milliseconds. The 1734D-IA8XOA8 has a maximum drop output voltage of 1.2 Volts AC at 0.5 Amps with a maximum leakage current of 2.25 Amps. Its output voltage ranges between 85 and 132 Volts AC and it has a maximum input current of 6 Amps per I/O module. The 1734D-IA8XOA8 has dimensions of 131.6 x 67.4 x 121.8 millimeters and a net weight of 393.41 grams. The 1734D-IA8XOA8 has a -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) storage temperature range and an operational temperature range of -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit) at 5-95% non-condensing relative humidity.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734D-IA8XOA8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1734D-IA8XOA8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1734D-IA8XOA8 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1734D-IA8XOA8 Ser A
|
1734D-IA8XOA8/A, Series A, Rev A | Request Quote |