Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerMonitor 3000 1404-M505A-RIO

Product image is representative; revision or series may vary. Contact us to request a specific version.

1404-M505A-RIO

|
Need a Specific Revision?

The Allen-Bradley 1404-M505A-RIO module is an M5 module under the PowerMonitor 3000 master module series. It has both the RS-485 and Remote I/O communication ports. The monitor has a power supply voltage of 120 to 240 Volts AC, a current rating of 5 Amps and a frequency rating of 50 to 60 Hertz.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1404-M505A-RIO

ManufacturerAllen Bradley
CategoryPLCs
Product LinePowerMonitor 3000
Part Number1404-M505A-RIO
Weight12.00 lbs (5.44 kg)
Cable Length3048 m (10,000 ft)
Node Capacity32 nodes
Communications Settings Rate57.6, 115.2, and 230.4 Kbps
Communication PortsI/O and RS-485
Power Supply120/ 240 V
Frequency Rating50- 60 Hz
Amperage Rating5 A
Operating Temperature0 to 50 degrees Celsius (32 to 131 degrees Fahrenheit)
Storage Temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Humidity5- 95%
Vibration10- 500 Hz: 2 g Operational (±0.012 in.)
Shock1/2 Sine Pulse, 11 ms duration: 30 g Operational and 30 g Nonoperational
Request a Repair

The Allen-Bradley 1404-M505A-RIO module is a PowerMonitor module with 2 communication ports that include the RS-485 and Remote I/O ports. The Remote I/O port means that this PowerMonitor module can make use of both of its communication ports simultaneously. The port has various performance features including a 32-node capacity, a maximum cable length of 3048 meters (10,000 feet), 11 discrete inputs, 2 discrete outputs, a minimum rate of 50 milliseconds for block transfer updates, and a 5 milliseconds rate for discrete I/O updates. Also, it has 3 communication rate settings which are 230.4 Kbps, 115.2 Kbps, and 57.6 Kbps, data tables for all data access with read/write block transfers, and a quarter rack of slave devices.

The Allen-Bradley 1404-M505A-RIO module has a dual-port, thus allowing for the use of both the RS-485 and the Remote I/O communication ports concurrently. The RIO port has a logical quarter rack of I/O that requires the users to configure the last rack status, group number, rack number, and the communication rate. The parameters for the 1404-M505A-RIO module should be configured so that the RIO rack address in the scanner module is in the range of 0 to 63 decimal values and the default value is 1, and so that the RIO group number corresponds to the quarter rack in the range of 0, 2, 4, or 6 and the default value is 0. In the PLC-2 base system, set the RIO last rack to the highest-numbered group/lack on the channel in the range of 0 to 1 and the default setting is 0. Lastly, configure the Allen-Bradley 1404-M505A-RIO module's  RIO communication rate to 230 Kbps, 115 Kbps, or 57.6 Kbps, and the default setting is 57.6 Kbps.