DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1404-M605A-ENT monitor is an Allen-Bradley master module for machine power management. It comes with a current rating of 5 Amps.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1404-M605A-ENT. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | PowerMonitor 3000 |
Part Number | 1404-M605A-ENT |
Description | Powermonitor |
Current | 5 Amperes |
Frequency | 50/60 Hertz |
Voltage | 120/240 AC, 125/250 DC |
Temperature | 0-55 degrees Celsius |
Setpoints | 20 |
Waveform Capture | 8 |
Harmonic Analysis | 41st Harmonics |
Brand | Allen-Bradley / Rockwell Automation |
Series | PowerMonitor 3000 |
Part Number | 1404-M605A-ENT |
Description | Powermonitor |
Current | 5 Amperes |
Frequency | 50/60 Hertz |
Voltage | 120/240 AC, 125/250 DC |
Temperature | 0-55 degrees Celsius |
Setpoints | 20 |
Waveform Capture | 8 |
Harmonic Analysis | 41st Harmonics |
The 1404-M605A-ENT monitor is a 3000 Series PowerMonitor device by Allen-Bradley. It is an industrial power monitoring device that can display a lot of important information, including the power usage, power parameters logging, overload condition, flow of power, and the power distribution levels. The device is an alternative to traditional electro-mechanical metering devices. The device can log event logs, trend logs, load factor logs, min/max logs, and other valuable information. The 1404-M605A-ENT monitor comes with different features, including the transient capture and analysis, harmonics measurement, and the transducer and energy meter modes. It has a current rating of 5 Amps. The operating frequency of the PowerMonitor is 50/60 Hertz. It has an input voltage rating between 120 and 240 Volts AC or 125 and 250 Volts DC. For internal communication and data transfer, the monitor is equipped with an Ethernet/IP adapter. The data transmission process is fast when using this adapter.
The Allen-Bradley 1404-M605A-ENT monitor module is equipped with a human-machine interface module on the front side. The interface module has a display panel along with integrated buttons. The buttons are used for navigating through the menu and executing different functions. During the installation of the power monitor, the cooling vents should not be blocked. Enough clearance should be left around the module during the wiring of the module. The 1404-M605A-ENT module comes with status indicators to show the running information of the monitor data and network activities. The monitor comes with self-test and diagnostic features which is helpful to access malfunctions and errors. The temperature of the environment should lie between 0 and 55 degrees Celsius for regular operation.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1404-M605A-ENT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | PowerMonitor 3000 |
Part Number | 1404-M605A-ENT |
Description | Powermonitor |
Current | 5 Amperes |
Frequency | 50/60 Hertz |
Voltage | 120/240 AC, 125/250 DC |
Temperature | 0-55 degrees Celsius |
Setpoints | 20 |
Waveform Capture | 8 |
Harmonic Analysis | 41st Harmonics |
Brand | Allen-Bradley / Rockwell Automation |
Series | PowerMonitor 3000 |
Part Number | 1404-M605A-ENT |
Description | Powermonitor |
Current | 5 Amperes |
Frequency | 50/60 Hertz |
Voltage | 120/240 AC, 125/250 DC |
Temperature | 0-55 degrees Celsius |
Setpoints | 20 |
Waveform Capture | 8 |
Harmonic Analysis | 41st Harmonics |
The 1404-M605A-ENT monitor is a 3000 Series PowerMonitor device by Allen-Bradley. It is an industrial power monitoring device that can display a lot of important information, including the power usage, power parameters logging, overload condition, flow of power, and the power distribution levels. The device is an alternative to traditional electro-mechanical metering devices. The device can log event logs, trend logs, load factor logs, min/max logs, and other valuable information. The 1404-M605A-ENT monitor comes with different features, including the transient capture and analysis, harmonics measurement, and the transducer and energy meter modes. It has a current rating of 5 Amps. The operating frequency of the PowerMonitor is 50/60 Hertz. It has an input voltage rating between 120 and 240 Volts AC or 125 and 250 Volts DC. For internal communication and data transfer, the monitor is equipped with an Ethernet/IP adapter. The data transmission process is fast when using this adapter.
The Allen-Bradley 1404-M605A-ENT monitor module is equipped with a human-machine interface module on the front side. The interface module has a display panel along with integrated buttons. The buttons are used for navigating through the menu and executing different functions. During the installation of the power monitor, the cooling vents should not be blocked. Enough clearance should be left around the module during the wiring of the module. The 1404-M605A-ENT module comes with status indicators to show the running information of the monitor data and network activities. The monitor comes with self-test and diagnostic features which is helpful to access malfunctions and errors. The temperature of the environment should lie between 0 and 55 degrees Celsius for regular operation.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1404-M605A-ENT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1404-M605A-ENT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.