DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1420-V1P-ENT monitor is an Allen-Bradley PowerMonitor device. It comes with a built-in LCD and it also meets the EC, IEC, NEMA, and UL standards.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1420-V1P-ENT. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | PowerMonitor 3000 |
Part Number | 1420-V1P-ENT |
Description | Powermonitor device |
Frequency | 45-65 Hertz |
Dielectric strength | 4 kC |
Phase | 3 |
Pulse output | 2 |
Amperage | 5 Amperes |
Voltage | 240 Volts AC |
Brand | Allen-Bradley / Rockwell Automation |
Series | PowerMonitor 3000 |
Part Number | 1420-V1P-ENT |
Description | Powermonitor device |
Frequency | 45-65 Hertz |
Dielectric strength | 4 kC |
Phase | 3 |
Pulse output | 2 |
Amperage | 5 Amperes |
Voltage | 240 Volts AC |
The 1420-V1P-ENT monitor is a 240 Volts AC PowerMonitor unit designed by Allen-Bradley. It is certified with the KC standard. It comes with a current rating of 5 Amps direct connection. The operating frequency of the PowerMonitor device ranges between 45 and 65 Hertz. It supports a three-phase power supply and it has 2-pulse output. The PowerMonitor device can be mounted to the door of a device. It comes with a built-in LCD. For networking and communication, it uses an Ethernet/IP adapter. It offers a high accuracy class with an accurate monitoring time of 0.2 seconds. It comes with a high sample rate and it can capture harmonics and sub-transients. The 1420-V1P-ENT monitor is equipped with a user-configurable alarm. It has a dielectric strength of 4 kC AC RMS for 1 minute. The maximum operating temperature of the monitor should not exceed 55 degrees Celsius. The enclosure is a NEMA Type 12 class enclosure. It meets standards like the EN, IEC, EC, NEMA, UL, and cUL-US standards.
The front part of the Allen-Bradley 1420-V1P-ENT monitor comes with IP 65 rated enclosure but the back part of the monitor is not water-resistant. The back part only comes with an IP 20 rating. The back part of the monitor should be protected against water splashes. The PowerMonitor device can be used to log the power parameters, including the real energy, the apparent power, and the power demand analysis parameters. The 1420-V1P-ENT monitor comes with a display panel with four buttons that are used for navigating the menu, selecting the program, and exiting the screen. There are four active alarm status indicators. An energy consumption rate indicator is also included which flashes when there is a higher rate of energy consumption than usual.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1420-V1P-ENT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | PowerMonitor 3000 |
Part Number | 1420-V1P-ENT |
Description | Powermonitor device |
Frequency | 45-65 Hertz |
Dielectric strength | 4 kC |
Phase | 3 |
Pulse output | 2 |
Amperage | 5 Amperes |
Voltage | 240 Volts AC |
Brand | Allen-Bradley / Rockwell Automation |
Series | PowerMonitor 3000 |
Part Number | 1420-V1P-ENT |
Description | Powermonitor device |
Frequency | 45-65 Hertz |
Dielectric strength | 4 kC |
Phase | 3 |
Pulse output | 2 |
Amperage | 5 Amperes |
Voltage | 240 Volts AC |
The 1420-V1P-ENT monitor is a 240 Volts AC PowerMonitor unit designed by Allen-Bradley. It is certified with the KC standard. It comes with a current rating of 5 Amps direct connection. The operating frequency of the PowerMonitor device ranges between 45 and 65 Hertz. It supports a three-phase power supply and it has 2-pulse output. The PowerMonitor device can be mounted to the door of a device. It comes with a built-in LCD. For networking and communication, it uses an Ethernet/IP adapter. It offers a high accuracy class with an accurate monitoring time of 0.2 seconds. It comes with a high sample rate and it can capture harmonics and sub-transients. The 1420-V1P-ENT monitor is equipped with a user-configurable alarm. It has a dielectric strength of 4 kC AC RMS for 1 minute. The maximum operating temperature of the monitor should not exceed 55 degrees Celsius. The enclosure is a NEMA Type 12 class enclosure. It meets standards like the EN, IEC, EC, NEMA, UL, and cUL-US standards.
The front part of the Allen-Bradley 1420-V1P-ENT monitor comes with IP 65 rated enclosure but the back part of the monitor is not water-resistant. The back part only comes with an IP 20 rating. The back part of the monitor should be protected against water splashes. The PowerMonitor device can be used to log the power parameters, including the real energy, the apparent power, and the power demand analysis parameters. The 1420-V1P-ENT monitor comes with a display panel with four buttons that are used for navigating the menu, selecting the program, and exiting the screen. There are four active alarm status indicators. An energy consumption rate indicator is also included which flashes when there is a higher rate of energy consumption than usual.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1420-V1P-ENT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1420-V1P-ENT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.