931N-A221 | Allen Bradley PLC Signal Conditioners

931N-A221

931N-A221

Description:

The 931N-A221 analog signal converter is a Bulletin 931 Nano signal conditioner made by Allen-Bradley/Rockwell Automation. It is a single-channel analog to analog converter with 24 Volts DC of supply voltage and 0.84 Watts of power consumption.

Rated 4.9 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 931N-A221

Add more parts to quote

Description:

The 931N-A221 analog signal converter is a Bulletin 931 Nano signal conditioner made by Allen-Bradley/Rockwell Automation. It is a single-channel analog to analog converter with 24 Volts DC of supply voltage and 0.84 Watts of power consumption.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 931N-A221.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 13 reviews

    Technical Specifications for 931N-A221

BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931N-A221
Product Description Analog Signal Converter
No. of Channels 1
Supply Voltage 24 Volts DC
Power Consumption 0.84 Watts
Current Input 0 to 23 mA
Voltage Input 0 to 10.25V, 0 to 11.5V, 0 to 5.75V
Current Output 0 to 23 mA
Voltage Output 0 to 10V DC
ConfigurationDIP Switch
Dimension (WxHxD) 6.1 x 112.5 x 114.3 millimeters
Weight70 grams
Power Rail Yes
BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931N-A221
Product Description Analog Signal Converter
No. of Channels 1
Supply Voltage 24 Volts DC
Power Consumption 0.84 Watts
Current Input 0 to 23 mA
Voltage Input 0 to 10.25V, 0 to 11.5V, 0 to 5.75V
Current Output 0 to 23 mA
Voltage Output 0 to 10V DC
ConfigurationDIP Switch
Dimension (WxHxD) 6.1 x 112.5 x 114.3 millimeters
Weight70 grams
Power Rail Yes
s

About 931N-A221

The 931N-A221 analog signal converter is a Nano signal conditioning device from Allen-Bradley/Rockwell Automation. It comes with a space-saving 6-millimeter housing, easy DIP switch configuration, and angled terminals for easy wiring. Some of the functions of this device are the isolation, signal conversion, and signal amplification functions. This analog signal converter is UL/CSA, CE, and ATEX certified to meet industrial standards. The common measurement instruments that interface with this signal conditioner are a temperature sensor, thermocouples, speed sensors, and load cells. The 931N-A221 analog signal converter is a standard signal converter with isolation powered by 24 Volts DC voltage and it is compatible with the power bus DIN system. The 931N-A221 signal conditioning device converts analog current and voltage signals while providing 3-way galvanic isolation between the input, output, and power supply.



 



The 931N-A221 converter's isolation facilities eliminate ground loop and noise-related errors to provide reliable and accurate signals. The input and output signals are electrically separated from each other and decoupled. Its Pollution Degree rating is Pollution Degree 2, its surge voltage category is Category II, and its environmental protection degree is IP 20. The 931N-A221 signal conditioner improves the signal quality of the process measurements between the control system and the field device. It galvanically isolates the signal via transformer coupling. It attempts to pick up the signal accurately and convert it into a higher level of electrical signals for transmission purposes. This analog signal converter can be used in a wide variety of industrial applications such as food and beverage production and steel production. It can be used to take critical process measurements such as pressure, speed, frequency, and voltage measurements on devices that are exposed to harsh environmental conditions in continuous production systems. It also provides a cost-effective design to convert current signals to a control system or PLC.



Repair Services for 931N-A221

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931N-A221. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 931N-A221

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 931N-A221

Resolutions For 931N-A221

About

Technical Specifications for 931N-A221

BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931N-A221
Product Description Analog Signal Converter
No. of Channels 1
Supply Voltage 24 Volts DC
Power Consumption 0.84 Watts
Current Input 0 to 23 mA
Voltage Input 0 to 10.25V, 0 to 11.5V, 0 to 5.75V
Current Output 0 to 23 mA
Voltage Output 0 to 10V DC
ConfigurationDIP Switch
Dimension (WxHxD) 6.1 x 112.5 x 114.3 millimeters
Weight70 grams
Power Rail Yes
BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931N-A221
Product Description Analog Signal Converter
No. of Channels 1
Supply Voltage 24 Volts DC
Power Consumption 0.84 Watts
Current Input 0 to 23 mA
Voltage Input 0 to 10.25V, 0 to 11.5V, 0 to 5.75V
Current Output 0 to 23 mA
Voltage Output 0 to 10V DC
ConfigurationDIP Switch
Dimension (WxHxD) 6.1 x 112.5 x 114.3 millimeters
Weight70 grams
Power Rail Yes

About 931N-A221

The 931N-A221 analog signal converter is a Nano signal conditioning device from Allen-Bradley/Rockwell Automation. It comes with a space-saving 6-millimeter housing, easy DIP switch configuration, and angled terminals for easy wiring. Some of the functions of this device are the isolation, signal conversion, and signal amplification functions. This analog signal converter is UL/CSA, CE, and ATEX certified to meet industrial standards. The common measurement instruments that interface with this signal conditioner are a temperature sensor, thermocouples, speed sensors, and load cells. The 931N-A221 analog signal converter is a standard signal converter with isolation powered by 24 Volts DC voltage and it is compatible with the power bus DIN system. The 931N-A221 signal conditioning device converts analog current and voltage signals while providing 3-way galvanic isolation between the input, output, and power supply.



 



The 931N-A221 converter's isolation facilities eliminate ground loop and noise-related errors to provide reliable and accurate signals. The input and output signals are electrically separated from each other and decoupled. Its Pollution Degree rating is Pollution Degree 2, its surge voltage category is Category II, and its environmental protection degree is IP 20. The 931N-A221 signal conditioner improves the signal quality of the process measurements between the control system and the field device. It galvanically isolates the signal via transformer coupling. It attempts to pick up the signal accurately and convert it into a higher level of electrical signals for transmission purposes. This analog signal converter can be used in a wide variety of industrial applications such as food and beverage production and steel production. It can be used to take critical process measurements such as pressure, speed, frequency, and voltage measurements on devices that are exposed to harsh environmental conditions in continuous production systems. It also provides a cost-effective design to convert current signals to a control system or PLC.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931N-A221. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931N-A221. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF