931S-M5213

The 931S-M5216 smart current measurements converter is a signal conditioner made by Allen-Bradley and built to monitor and measure currents of up to 60 Amps. It offers a convenient and low-cost way to monitor and measure current conversion, and it offers digital and analog output options and protection from problems such as over-current and under-current situations. The 931S-M5216 signal conditioner offers true RMS sensing (via the RMS algorithm) for precise current monitoring, and it can be configured easily by using either a potentiometer or a DIP switch. The 931S-M5216 signal conditioner has a power consumption rating of 2.2 Watts and a voltage supply rating of 16.8 to 31.2 Volts DC. The 931S-M5216 signal conditioner has a 4-way galvanic isolator with a 4 kilovolts isolation rating (between the power supply, the outputs, and the input) and a rated impulse withstand of 6.4 kilovolts.

The 931S-M5216 signal conditioner has an accuracy rating of 0.75% of the full-scale range and a step response time of 300 milliseconds (RMS). The 931S-M5216 signal conditioner has a contactless through-hole input for a current-carrying conductor to pass through and configurable current measurement ranges of 0 to 40, 50, or 60 Amps. This device also has 2 configurable analog outputs with configurable output signal ranges and an impedance rating of 600 Ohms. The 931S-M5216 signal conditioner has a digital relay output (that is configurable) with 6 Amps of rated switching current and 250 Volts AC of maximum switching voltage. The 931S-M5216 signal conditioner has an IP 20 environmental protection rating, and it has an operating ambient temperature range of -25 to 60 degrees Celsius. The 931S-M5216 signal conditioner has approximate dimensions of 22.5 x 119.2 x 113.6 millimeters and an approximate weight of 158 grams.