Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Signal Conditioners 931S-M5216

Product image is representative; revision or series may vary. Contact us to request a specific version.

931S-M5216

|
Need a Specific Revision?

The Allen-Bradley 931S-M5216 current measurement converter converts and measures currents (both AC and DC) of up to 60 Amps. It offers 4-way galvanic isolation between the power supply, input, and outputs, and it has removable terminals with error-proof keys.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 931S-M5216

ManufacturerAllen Bradley
CategoryPLCs
Product LineSignal Conditioners
Part Number931S-M5216
Weight25.00 lbs (11.34 kg)
DescriptionSmart Series Current Measurements Converter
Supply Voltage16.8 to 31.2 Volts DC
Rated Voltage300 Volts AC
Power Consumption2.2 Watts
Accuracy0.75%
Response Time300 Milliseconds
Galvanic Isolation Type4-Way Galvanic Isolator
Protection RatingIP20
Terminal TypeRemovable Terminals
Approximate Dimension22.5 x 119.2 x 113.6 Millimeters
Request a Repair

The 931S-M5216 smart current measurements converter is a signal conditioner by Allen-Bradley that is built to monitor and measure currents of up to 60 Amps. It offers a convenient and low-cost way to monitor and measure current conversion, and it offers digital and analog output options and protection from problems like over-current and under-current. The 931S-M5216 signal conditioner offers true RMS sensing (via the RMS algorithm) for precise current monitoring, and it can be configured easily by using either a potentiometer or a DIP switch. The 931S-M5216 signal conditioner has a power consumption rating of 2.2 Watts and a voltage supply rating of 16.8 to 31.2 Volts DC. The 931S-M5216 signal conditioner has a 4-way galvanic isolator with 4 kilovolts of isolation rating (between the power supply, output, and input) and a rated impulse withstand of 6.4 kilovolts.

The 931S-M5216 signal conditioner has an accuracy of 0.75% of the full-scale range and a step response time of 300 milliseconds. The 931S-M5216 signal conditioner has a contactless through-hole input for a current-carrying conductor to pass through and a configurable current measurement range of 0 to 40, 50, or 60 Amps. This device also has 2 configurable analog outputs with configurable outputs signal ranges and an impedance rating of 600 Ohms. The 931S-M5216 signal conditioner has a digital relay output (configurable) with 6 Amps of rated switching current and 250 Volts AC of maximum switching voltage. The 931S-M5216 signal conditioner has an IP 20 environmental protection rating, and it has an operating temperature range of -25 to 60 degrees Celsius. The 931S-M5216 signal conditioner has approximate dimensions of 22.5 x 119.2 x 113.6 millimeters and an approximate weight of 158 grams.