931S-U392 | Allen Bradley PLC Signal Conditioners

931S-U392

931S-U392

Description: The 931S-U392 signal conditioner is a standard signal converter device. It has been manufactured by Allen-Bradley. The converter changes an electric current into an industrial current signal to relay important data signals. The electrical signals from different sensor devices are different. read more...
Rated 4.5 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 931S-U392

Add more parts to quote

Description: The 931S-U392 signal conditioner is a standard signal converter device. It has been manufactured by Allen-Bradley. The converter changes an electric current into an industrial current signal to relay important data signals. The electrical signals from different sensor devices are different. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 931S-U392.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 11 reviews

    Technical Specifications for 931S-U392

BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931S-U392
DescriptionSignal Converter device
Input resistance40 Ohms
Maximum power consumption3.5 watts
Voltage90-264 Volts
MeasurementPT 100/2/3
StandardCE, ATEX, KC, RCM
Input curren rating+/- 25 mA DC, +/- 5 Amps DC
Response time0.5 milliseconds
Accuracy0.05%
BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931S-U392
DescriptionSignal Converter device
Input resistance40 Ohms
Maximum power consumption3.5 watts
Voltage90-264 Volts
MeasurementPT 100/2/3
StandardCE, ATEX, KC, RCM
Input curren rating+/- 25 mA DC, +/- 5 Amps DC
Response time0.5 milliseconds
Accuracy0.05%
s

About 931S-U392

The 931S-U392 signal conditioner is a standard signal converter device. It has been manufactured by Allen-Bradley. The converter changes an electric current into an industrial current signal to relay important data signals. The electrical signals from different sensor devices are different. The device converts them into a single form. It supports a broad range of active and passive signals. A removable terminal with error proof keys is present in the converter. The 931S-U392 signal conditioner is mostly used in the industrial sector for different critical process measurements. The converter device can measure signals by using thermocouples, PT 100/2/3 wire, a potentiometer, and resistance. The input current rating of the converter is configurable for +/- 25 millimaps DC and +/- 5 Amps DC. The current input resistance is 40 Ohms. The cable length compensation of the converter is +/- 0.002 ohms per cable resistance.



 



The Allen-Bradley 931S-U392 signal conditioner helps to provide a reliable and high-quality signal to industrial application processes. The converter device meets the CE, ATEX, KC, and RCM standards. The 931S-U392 signal conditioner is equipped with 3-way galvanic isolation between the input, the output, and the power supply. The configuration can be done by using the onboard buttons and encoders. It can also be configured by using the FDT or DTM program. It is powered with a 24 Volts DC supply and it is compatible with Bus DIN systems. The converter offers a high level of performance and it has a high accuracy rating of up to 0.05%. It has fast response time of up to 0.5 milliseconds and it has low power levels of consumption. The 931S-U392 signal conditioner runs with 90 to 264 Volts AC and it has a maximum power consumption of 3.5 Watts. The converter weighs 208 grams and it is compact in size.



Technical Description of 931S-U392

The 931S-U392 signal conditioner is a standard signal converter device. It is powered with 24 Volts DC power supply.

Repair Services for 931S-U392

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931S-U392. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 931S-U392

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 931S-U392

Resolutions For 931S-U392

About

Technical Specifications for 931S-U392

BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931S-U392
DescriptionSignal Converter device
Input resistance40 Ohms
Maximum power consumption3.5 watts
Voltage90-264 Volts
MeasurementPT 100/2/3
StandardCE, ATEX, KC, RCM
Input curren rating+/- 25 mA DC, +/- 5 Amps DC
Response time0.5 milliseconds
Accuracy0.05%
BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931S-U392
DescriptionSignal Converter device
Input resistance40 Ohms
Maximum power consumption3.5 watts
Voltage90-264 Volts
MeasurementPT 100/2/3
StandardCE, ATEX, KC, RCM
Input curren rating+/- 25 mA DC, +/- 5 Amps DC
Response time0.5 milliseconds
Accuracy0.05%

About 931S-U392

The 931S-U392 signal conditioner is a standard signal converter device. It has been manufactured by Allen-Bradley. The converter changes an electric current into an industrial current signal to relay important data signals. The electrical signals from different sensor devices are different. The device converts them into a single form. It supports a broad range of active and passive signals. A removable terminal with error proof keys is present in the converter. The 931S-U392 signal conditioner is mostly used in the industrial sector for different critical process measurements. The converter device can measure signals by using thermocouples, PT 100/2/3 wire, a potentiometer, and resistance. The input current rating of the converter is configurable for +/- 25 millimaps DC and +/- 5 Amps DC. The current input resistance is 40 Ohms. The cable length compensation of the converter is +/- 0.002 ohms per cable resistance.



 



The Allen-Bradley 931S-U392 signal conditioner helps to provide a reliable and high-quality signal to industrial application processes. The converter device meets the CE, ATEX, KC, and RCM standards. The 931S-U392 signal conditioner is equipped with 3-way galvanic isolation between the input, the output, and the power supply. The configuration can be done by using the onboard buttons and encoders. It can also be configured by using the FDT or DTM program. It is powered with a 24 Volts DC supply and it is compatible with Bus DIN systems. The converter offers a high level of performance and it has a high accuracy rating of up to 0.05%. It has fast response time of up to 0.5 milliseconds and it has low power levels of consumption. The 931S-U392 signal conditioner runs with 90 to 264 Volts AC and it has a maximum power consumption of 3.5 Watts. The converter weighs 208 grams and it is compact in size.



Technical Description of 931S-U392

The 931S-U392 signal conditioner is a standard signal converter device. It is powered with 24 Volts DC power supply.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931S-U392. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931S-U392. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF