931S-V392 | Allen Bradley PLC Signal Conditioners

931S-V392

931S-V392

Description:

The 931S-V392 signal conditioner is a measurement converter device with a 4-way galvanic isolation between the input and 2 ouputs. The rated switching current is 5 Amps.

Rated 4.5 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 931S-V392

Add more parts to quote

Description:

The 931S-V392 signal conditioner is a measurement converter device with a 4-way galvanic isolation between the input and 2 ouputs. The rated switching current is 5 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 931S-V392.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 20 reviews

    Technical Specifications for 931S-V392

BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931S-V392
DescriptionVoltage measurement converter
Voltage400 Volts AC/DC
Input frequency40/60 Hertz
Maximum switching voltage250 Volts AC, 30 Volts DC
Impulse withstand voltage4 kC output, 6 kV input-output
Torque screw terminal0.6 Nm
Temperature-25 to 65 degrees Celsius
Switching current5 Amperes
StandardCE, KC, RCH, RoHS
BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931S-V392
DescriptionVoltage measurement converter
Voltage400 Volts AC/DC
Input frequency40/60 Hertz
Maximum switching voltage250 Volts AC, 30 Volts DC
Impulse withstand voltage4 kC output, 6 kV input-output
Torque screw terminal0.6 Nm
Temperature-25 to 65 degrees Celsius
Switching current5 Amperes
StandardCE, KC, RCH, RoHS
s

About 931S-V392

The 931S-V392 signal conditioner is a voltage measurement converter that is used to monitor and change the single-phase voltage (AC or DC) by up to 400 Volts. The 931S-V392 signal conditioner is an Allen-Bradley manufactured converter device with 2 isolated relay outputs. It is equipped with 4-way galvanic isolation between the input and 2 outputs. This signal conditioner variant comes with several power supply options. The critical measurements such as the temperature, pressure, flow, level, weight, current, or voltage measurements can be interfered with by harsh environmental conditions that produce incorrect signals. This voltage measure converter is a perfect choice for ensuring accurate measurements in industrial environments including treatment plants, oil and gas, and steel production industries. It provides reliable signals and measurements in critical applications.



 



The Allen-Bradley 931S-V392 signal uses an input frequency of 40 to 60 Hertz. The maximum switching voltage for the AC and DC voltage supplies is 250 Volts and 30 Volts, respectively. The rated switching current of the converter is 5 Amps. The 931S-V392 signal conditioner is manufactured with a DIP switch and potentiometer configuration. The rated torque of screw terminal is 0.6 N-m. The impulse withstand voltage of the converter has 4 kV supply output and 6 kV input-output. An alarm is equipped with the converter that is used to alert the operators for different system events. The 931S-V392 signal conditioner is efficient in its operation. It converts thermocouple RTD measurements. It reduces the need to run expensive cables to transfer signals to the main control system. It meets the cURus, CE, KC, RCH, and RoHS standards. The environmental temperature should range between -25 and 65 degrees Celsius with 5 to 85% non-condensing humidity for the signal conditioner to operate properly.



Repair Services for 931S-V392

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931S-V392. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 931S-V392

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 931S-V392

Resolutions For 931S-V392

About

Technical Specifications for 931S-V392

BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931S-V392
DescriptionVoltage measurement converter
Voltage400 Volts AC/DC
Input frequency40/60 Hertz
Maximum switching voltage250 Volts AC, 30 Volts DC
Impulse withstand voltage4 kC output, 6 kV input-output
Torque screw terminal0.6 Nm
Temperature-25 to 65 degrees Celsius
Switching current5 Amperes
StandardCE, KC, RCH, RoHS
BrandAllen-Bradley / Rockwell Automation
SeriesSignal Conditioners
Part Number931S-V392
DescriptionVoltage measurement converter
Voltage400 Volts AC/DC
Input frequency40/60 Hertz
Maximum switching voltage250 Volts AC, 30 Volts DC
Impulse withstand voltage4 kC output, 6 kV input-output
Torque screw terminal0.6 Nm
Temperature-25 to 65 degrees Celsius
Switching current5 Amperes
StandardCE, KC, RCH, RoHS

About 931S-V392

The 931S-V392 signal conditioner is a voltage measurement converter that is used to monitor and change the single-phase voltage (AC or DC) by up to 400 Volts. The 931S-V392 signal conditioner is an Allen-Bradley manufactured converter device with 2 isolated relay outputs. It is equipped with 4-way galvanic isolation between the input and 2 outputs. This signal conditioner variant comes with several power supply options. The critical measurements such as the temperature, pressure, flow, level, weight, current, or voltage measurements can be interfered with by harsh environmental conditions that produce incorrect signals. This voltage measure converter is a perfect choice for ensuring accurate measurements in industrial environments including treatment plants, oil and gas, and steel production industries. It provides reliable signals and measurements in critical applications.



 



The Allen-Bradley 931S-V392 signal uses an input frequency of 40 to 60 Hertz. The maximum switching voltage for the AC and DC voltage supplies is 250 Volts and 30 Volts, respectively. The rated switching current of the converter is 5 Amps. The 931S-V392 signal conditioner is manufactured with a DIP switch and potentiometer configuration. The rated torque of screw terminal is 0.6 N-m. The impulse withstand voltage of the converter has 4 kV supply output and 6 kV input-output. An alarm is equipped with the converter that is used to alert the operators for different system events. The 931S-V392 signal conditioner is efficient in its operation. It converts thermocouple RTD measurements. It reduces the need to run expensive cables to transfer signals to the main control system. It meets the cURus, CE, KC, RCH, and RoHS standards. The environmental temperature should range between -25 and 65 degrees Celsius with 5 to 85% non-condensing humidity for the signal conditioner to operate properly.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931S-V392. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 931S-V392. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF