DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley and Woodhead SST-DHP-PCI card is an interface card for the Allen-Bradley Data Highway Plus network. It operates with 3.3 Volts and 5 Volts of power from its connected motherboard. This card can communicate at rates of up to 230.4 Kbaud.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the SST-DHP-PCI. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Woodhead/Allen-Bradley |
Series | SST Cards |
Part Number | SST-DHP-PCI |
Product Type | Interface Card |
Network | Data Highway Plus |
Voltage | 3.3 Volts, 5 Volts |
Motherboard | 2.1 and 2.2 PCI-Compliant Motherboards |
Interface | 32-Bit PCI Interface |
Indicators | Network LED, SYS LED |
Data Rates | 57.6 KBaud, 115.2 KBaud, or 230.4 KBaud |
Manufacturer | Woodhead/Allen-Bradley |
Series | SST Cards |
Part Number | SST-DHP-PCI |
Product Type | Interface Card |
Network | Data Highway Plus |
Voltage | 3.3 Volts, 5 Volts |
Motherboard | 2.1 and 2.2 PCI-Compliant Motherboards |
Interface | 32-Bit PCI Interface |
Indicators | Network LED, SYS LED |
Data Rates | 57.6 KBaud, 115.2 KBaud, or 230.4 KBaud |
The SST-DHP-PCI card manufactured by Allen-Bradley and Woodhead is an industrial interface card. This interface card is designed to be used for communication applications with the Allen-Bradley Data Highway Plus networks. The SST-DHP-PCI interface card comes with a PCI interface that is clocked at 33 MHz and 32 bits. The microprocessor of the SST-DHP-PCI interface card is a Z182 microprocessor that supports 64K of RAM and that is clocked at 29.4912 MHz. This device also features 64K of shared RAM, a Phoenix connector with 6 pins, visual status indicators, and supported data rates of 57.6 KBaud, 115.2 KBaud, or 230.4 KBaud. The SST-DHP-PCI interface card has a PCI edge connector that it can use to plug into any 2.1 or 2.2 version of a PCI-compliant motherboard.
When the Allen-Bradley and Woodhead SST-DHP-PCI interface card is plugged into a motherboard, the motherboard connector needs to be able to supply it with both 3.3 Volts of power and 5 Volts of power depending on the application. The status indicators on this interface card are 2 LEDs that are located near the card’s mounting bracket. The LED that is closer to the SST-DHP-PCI card’s printed circuit board is the Network LED while the LED that is further away from the printed circuit board is the “SYS LED” for the whole system.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SST-DHP-PCI. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Woodhead/Allen-Bradley |
Series | SST Cards |
Part Number | SST-DHP-PCI |
Product Type | Interface Card |
Network | Data Highway Plus |
Voltage | 3.3 Volts, 5 Volts |
Motherboard | 2.1 and 2.2 PCI-Compliant Motherboards |
Interface | 32-Bit PCI Interface |
Indicators | Network LED, SYS LED |
Data Rates | 57.6 KBaud, 115.2 KBaud, or 230.4 KBaud |
Manufacturer | Woodhead/Allen-Bradley |
Series | SST Cards |
Part Number | SST-DHP-PCI |
Product Type | Interface Card |
Network | Data Highway Plus |
Voltage | 3.3 Volts, 5 Volts |
Motherboard | 2.1 and 2.2 PCI-Compliant Motherboards |
Interface | 32-Bit PCI Interface |
Indicators | Network LED, SYS LED |
Data Rates | 57.6 KBaud, 115.2 KBaud, or 230.4 KBaud |
The SST-DHP-PCI card manufactured by Allen-Bradley and Woodhead is an industrial interface card. This interface card is designed to be used for communication applications with the Allen-Bradley Data Highway Plus networks. The SST-DHP-PCI interface card comes with a PCI interface that is clocked at 33 MHz and 32 bits. The microprocessor of the SST-DHP-PCI interface card is a Z182 microprocessor that supports 64K of RAM and that is clocked at 29.4912 MHz. This device also features 64K of shared RAM, a Phoenix connector with 6 pins, visual status indicators, and supported data rates of 57.6 KBaud, 115.2 KBaud, or 230.4 KBaud. The SST-DHP-PCI interface card has a PCI edge connector that it can use to plug into any 2.1 or 2.2 version of a PCI-compliant motherboard.
When the Allen-Bradley and Woodhead SST-DHP-PCI interface card is plugged into a motherboard, the motherboard connector needs to be able to supply it with both 3.3 Volts of power and 5 Volts of power depending on the application. The status indicators on this interface card are 2 LEDs that are located near the card’s mounting bracket. The LED that is closer to the SST-DHP-PCI card’s printed circuit board is the Network LED while the LED that is further away from the printed circuit board is the “SYS LED” for the whole system.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SST-DHP-PCI. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SST-DHP-PCI. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.