Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Stratix 2000 1783-US7T1H

Product image is representative; revision or series may vary. Contact us to request a specific version.

1783-US7T1H

|

The Allen-Bradley/Rockwell Automation 1783-US7T1H switch is an 8-port Ethernet switch. Its 8 Ethernet ports include 7 fast Ethernet ports and 1 SFP Ethernet port that works with an SFP module. The 1783-US7T1H Ethernet switch is an unmanaged type of Ethernet switch from the Allen-Bradley Stratix 2000 series. The power input voltage rating of this switch is 24 Volts AC/DC. Additionally, the operating voltage ranges supported by the 1783-US7T1H unmanaged Ethernet switch are 18 to 30 Volts AC at 50 to 60 Hertz and 12 to 48 Volts DC.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1783-US7T1H

ManufacturerAllen Bradley
CategoryPLCs
Product LineStratix 2000
Part Number1783-US7T1H
Weight2.75 lbs (1.25 kg)
Total Ports8
RJ45 Ports7 Fast Ethernet
SFP Ports1 Fast Ethernet Singlemode Preinstalled Fiber SFP Module
Max Inrush Current0.41 A
Power Input24V (12?48V DC, 18...30V AC, 50/60 Hz), SELV
Max Power Consumption4.6 W
Nom CurrentDC 250 mA; AC 500 mA
Max CurrentDC 510 mA; AC 1100 mA
Wire Size: Ground Connection2.5 mm2 (14 AWG) Copper Wire Suitable for 187 °F (86 °C) Above Surrounding Ambient Temperature Outside the Enclosure, with Suitable Ring Terminal
Wire Size: DC Power Connection4.5?5.0 in?lb (0.50?0.56 N?m)
Power Terminal Screw Torque8.05 in?lb
Max Ground Terminal Screw TorqueOpen-Style/None
Enclosure Type Rating4.50 x 3.02 x 1.80 in (114.5 x 76.8 x 45.6 mm)

The Allen-Bradley 1783-US7T1H is a Stratix 2000 unmanaged Ethernet switch. It has a total of 8 ports available, 7 fast Ethernet RJ45 ports and 1 fast Ethernet single-mode preinstalled fiber SFP module SFP port. Note that this switch does not ship with any SFP module and you have to buy those modules separately. This switch comes with broadcast storm thresholds of 20 packets per second for 10 Mbps per port and 200 packets per second for 100 Mbps per port. Yellow/green status indicators, with a blink rate of 105 ms, are present with this switch and these let you know the current state of the port speed, power supply, and network. The 1783-US7T1H switch uses an open-type enclosure and it measures 4.5 x 3.02 x 1.8 inches. This Series B switch comes with a power input of 24V (12-48V DC, 18-30V AC, 50-60Hz), SELV. It has nominal currents of 250 mA DC and 500 mA AC and maximum currents of 510 mA DC and 1100 mA AC. The maximum power consumption is 4.6 W and maximum inrush current is 0.41 A. When using a ground connection, the required wire is a 2.5 mm2 (14 AWG) copper wire suitable for 86 ËšC above the ambient temperature outside the enclosure, with a suitable ring terminal. For a DC power connection, you need a 4 to 0.25 mm2 (12 to 24 AWG) twisted-pair copper wire that is also suitable for 86 ËšC above the ambient temperature outside the enclosure. The 1783-US7T1H comes with a non-condensing relative humidity of 5-95%, has an operating temperature of -40-75 ËšC and a storage temperature of -40-85 ËšC. This switch also has maximum ambient air temperatures of 75 ËšC. Operating vibration is 2 g at 10-500 Hz and the shock is 15 g when operating and 30 g when not in operation.

Revision Part #Also known as
1783-US7T1H Ser A1783-US7T1H/A, Series A, Rev A
Don't see your particular revision? Contact us now.