DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1783-BMS06TA switch is a 6-port managed Ethernet switch. All 6 of the switch ports are copper Fast Ethernet ports.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1783-BMS06TA. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | Stratix 5700 |
Part Number | 1783-BMS06TA |
Product type | Managed Ethernet switch |
Ports | 6 |
Copper ports | 6 |
Fiber ports | NA |
Input voltage | 12 to 48 Volts DC |
Weigt | 1.11 kilograms |
Operating temperature | -40 to 60 degrees Celsius |
Brand | Allen-Bradley / Rockwell Automation |
Series | Stratix 5700 |
Part Number | 1783-BMS06TA |
Product type | Managed Ethernet switch |
Ports | 6 |
Copper ports | 6 |
Fiber ports | NA |
Input voltage | 12 to 48 Volts DC |
Weigt | 1.11 kilograms |
Operating temperature | -40 to 60 degrees Celsius |
The 1783-BMS06TA switch is an Allen-Bradley 5700 series managed Ethernet switch with 6 ports. All the 6 switch ports are copper ports and they support Fast Ethernet. Ports which support fiber SFPs are not available on the 1783-BMS06TA switch. The full suite of supported security features includes the MAC ID port security, IEEE 802.1x security, CIP port control and fault detection, and the TACACS+ the Radius authentication and encryption (with separate IOS).
Duplicate IP detection, port mirroring, syslog, and broken wire detection are the supported diagnostics features, and the SNMP, smartports, DHCP per port, and CLI features are the management features that are supported on the 1783-BMS06TA switch. Network Address Translation (NAT) is available as a separate option. The alarm relay on the 1783-BMS06TA switch is rated for 1 Amp of current at 30 Volts DC or 0.5 Amps at 48 Volts DC. The switch operates at a DC input ranging from 12 to 48 Volts DC and it draws a current ranging from 0.5 to 2 Amps. The power dissipation is 15 Watts. The weight of the 1783-BMS06TA switch is approximately 2.45 pounds. The open switch enclosure measures 5.1 x 2.94 x 4.59 inches. To prevent overheating, Allen-Bradley recommends that the following minimum clearances should be maintained: 2 inches in front of the switch, 2 inches on both sides of the switch, and 2 inches around the top and bottom of the switch.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1783-BMS06TA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | Stratix 5700 |
Part Number | 1783-BMS06TA |
Product type | Managed Ethernet switch |
Ports | 6 |
Copper ports | 6 |
Fiber ports | NA |
Input voltage | 12 to 48 Volts DC |
Weigt | 1.11 kilograms |
Operating temperature | -40 to 60 degrees Celsius |
Brand | Allen-Bradley / Rockwell Automation |
Series | Stratix 5700 |
Part Number | 1783-BMS06TA |
Product type | Managed Ethernet switch |
Ports | 6 |
Copper ports | 6 |
Fiber ports | NA |
Input voltage | 12 to 48 Volts DC |
Weigt | 1.11 kilograms |
Operating temperature | -40 to 60 degrees Celsius |
The 1783-BMS06TA switch is an Allen-Bradley 5700 series managed Ethernet switch with 6 ports. All the 6 switch ports are copper ports and they support Fast Ethernet. Ports which support fiber SFPs are not available on the 1783-BMS06TA switch. The full suite of supported security features includes the MAC ID port security, IEEE 802.1x security, CIP port control and fault detection, and the TACACS+ the Radius authentication and encryption (with separate IOS).
Duplicate IP detection, port mirroring, syslog, and broken wire detection are the supported diagnostics features, and the SNMP, smartports, DHCP per port, and CLI features are the management features that are supported on the 1783-BMS06TA switch. Network Address Translation (NAT) is available as a separate option. The alarm relay on the 1783-BMS06TA switch is rated for 1 Amp of current at 30 Volts DC or 0.5 Amps at 48 Volts DC. The switch operates at a DC input ranging from 12 to 48 Volts DC and it draws a current ranging from 0.5 to 2 Amps. The power dissipation is 15 Watts. The weight of the 1783-BMS06TA switch is approximately 2.45 pounds. The open switch enclosure measures 5.1 x 2.94 x 4.59 inches. To prevent overheating, Allen-Bradley recommends that the following minimum clearances should be maintained: 2 inches in front of the switch, 2 inches on both sides of the switch, and 2 inches around the top and bottom of the switch.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1783-BMS06TA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1783-BMS06TA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.