1783-BMS10CGL

Rated 5 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1783-BMS10CGL

Description: The Allen-Bradley 1783-BMS10CGL switch is a Ethernet switch with 10 ports. It has 8 Fast Ethernet copper ports and 2 Gigibit Etherner combo ports.
Available Now
Request a quote for 1783-BMS10CGL

Description:

The Allen-Bradley 1783-BMS10CGL switch is a Ethernet switch with 10 ports. It has 8 Fast Ethernet copper ports and 2 Gigibit Etherner combo ports.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1783-BMS10CGL.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 16 reviews

    Technical Specifications for 1783-BMS10CGL

BrandAllen-Bradley / Rockwell Automation
SeriesStratix 5700
Part Number1783-BMS10CGL
Product typeManaged Ethernet switch
Ports10
Copper ports8
Combo ports2
Input voltage12 to 48 Volts DC
Dimensions129.5 x 91.4 x 116.7 millimeters
Weight1.25 kilograms
BrandAllen-Bradley / Rockwell Automation
SeriesStratix 5700
Part Number1783-BMS10CGL
Product typeManaged Ethernet switch
Ports10
Copper ports8
Combo ports2
Input voltage12 to 48 Volts DC
Dimensions129.5 x 91.4 x 116.7 millimeters
Weight1.25 kilograms
s

About 1783-BMS10CGL

The Allen-Bradley Stratix 5700 series 1783-BMS10CGL switch is an Ethernet switch. The 1783-BMS10CGL switch is a configurable and managed switch with 10 ports. There are 8 copper ports and 2 combo ports on the 1783-BMS10CGL switch. The copper ports support Fast Ethernet. The combo ports support Gigabit Ethernet.



 



The input voltage range for the 1783-BMS10CGL switch is from 12 to 48 Volts DC. The input current range is from 0.5 to 2 Amps. The power input should be supplied from a Class 2 or SELV power supply. The rated maximum power consumption for the 1783-BMS10CGL switch is 17 Watts. The rated power dissipation is also 17 Watts. The rated insulation voltage is 50 Volts. There is no insulation between the Ethernet ports and between the console port and the system. The recommended wire for Ethernet connections is 2 / 4 pair Category 5e cable. The recommended wire for DC power is 20 to 18 AWG solid / stranded copper wire. The recommended wire for alarm connections is 20 to 18 AWG rated solid or stranded copper wire. The open switch enclosure has dimensions of 129.5 x 91.4 x 116.7 millimeters. The approximate weight of the 1783-BMS10CGL switch is 1.25 kilograms.

This content was written and compiled by dosupply.com and should not be copied.

Repair Services for 1783-BMS10CGL

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1783-BMS10CGL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1783-BMS10CGL

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1783-BMS10CGL

Resolutions For 1783-BMS10CGL

About

Technical Specifications for 1783-BMS10CGL

BrandAllen-Bradley / Rockwell Automation
SeriesStratix 5700
Part Number1783-BMS10CGL
Product typeManaged Ethernet switch
Ports10
Copper ports8
Combo ports2
Input voltage12 to 48 Volts DC
Dimensions129.5 x 91.4 x 116.7 millimeters
Weight1.25 kilograms
BrandAllen-Bradley / Rockwell Automation
SeriesStratix 5700
Part Number1783-BMS10CGL
Product typeManaged Ethernet switch
Ports10
Copper ports8
Combo ports2
Input voltage12 to 48 Volts DC
Dimensions129.5 x 91.4 x 116.7 millimeters
Weight1.25 kilograms

About 1783-BMS10CGL

The Allen-Bradley Stratix 5700 series 1783-BMS10CGL switch is an Ethernet switch. The 1783-BMS10CGL switch is a configurable and managed switch with 10 ports. There are 8 copper ports and 2 combo ports on the 1783-BMS10CGL switch. The copper ports support Fast Ethernet. The combo ports support Gigabit Ethernet.



 



The input voltage range for the 1783-BMS10CGL switch is from 12 to 48 Volts DC. The input current range is from 0.5 to 2 Amps. The power input should be supplied from a Class 2 or SELV power supply. The rated maximum power consumption for the 1783-BMS10CGL switch is 17 Watts. The rated power dissipation is also 17 Watts. The rated insulation voltage is 50 Volts. There is no insulation between the Ethernet ports and between the console port and the system. The recommended wire for Ethernet connections is 2 / 4 pair Category 5e cable. The recommended wire for DC power is 20 to 18 AWG solid / stranded copper wire. The recommended wire for alarm connections is 20 to 18 AWG rated solid or stranded copper wire. The open switch enclosure has dimensions of 129.5 x 91.4 x 116.7 millimeters. The approximate weight of the 1783-BMS10CGL switch is 1.25 kilograms.

This content was written and compiled by dosupply.com and should not be copied.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1783-BMS10CGL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1783-BMS10CGL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF