The 1783-BMS12T4E2CGP Ethernet switch is an Allen-Bradley PoE switch. It is part of the Stratix 5700 PoE switches product line. There are 4 PoE ports on the 1783-BMS12T4E2CGP switch which can be used to provide power over Ethernet cables to all devices which support PoE. In addition, there are 12 Fast Ethernet copper (RJ45) ports and 2 Gigabit Ethernet combo (RJ45 + SFP) ports, and s the 1783-BMS12T4E2CGP switch has a total of 18 ports. The fFrmware version shipped with the switch from the factory is the Full version which supports all the switching, security, diagnostics, and management features which are available on the Stratix 5700 series switches. In addition, the 1783-BMS12T4E2CGP switch Firmware also supports both the DLR and CIP sync features.
The alarm relay on the 1783-BMS12T4E2CGP switch is rated for 0.5 Amps of current at 48 Volts DC and for 1 Amp at 30 Volts DC. The input current and voltage ratings for the 1783-BMS12T4E2CGP switch are 0.5 to 3 Amps and 12 to 48 Volts DC, respectively. The maximum power consumption of the 1783-BMS12T4E2CGP switch is 30 Watts, which is the highest value that can be configured while using all ports. The rated isolation voltage is 60 Volts and the switch has been type tested at 1585 Volts DC for 60 seconds. The recommended wire sizes for the DC power, alarm, and ground connections are 20 to 18 AWG, 20 to 18 AWG, and 12 AWG (minimum), respectively. The maximum recommended screw torque for the power and alarm terminals and for the ground terminals is 0.23 N-m and 0.96 N-m, respectively. The weight of the 1783-BMS12T4E2CGP switch is approximately 2.45 pounds and its dimensions are 5.1 x 5 x 5.3 inches.
Repair Services for 1783-BMS12T4E2CGP
||Ask|| Get Quote |
Our highly skilled technicians can repair your 1783-BMS12T4E2CGP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.