1783-BMS20CA - In Stock | Allen Bradley PLC Stratix 5700

1783-BMS20CA

Rated 4.9 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1783-BMS20CA

Description: The Allen-Bradley Stratix 5700 series 1783-BMS20CA switch is a switch with a total of 20 ports. Two fiber ports, two combo ports, and sixteen copper ports are available.  
In Stock Ships Today
Request a quote for 1783-BMS20CA

Description:

The Allen-Bradley Stratix 5700 series 1783-BMS20CA switch is a switch with a total of 20 ports. Two fiber ports, two combo ports, and sixteen copper ports are available.

 

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1783-BMS20CA.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 19 reviews

    Technical Specifications for 1783-BMS20CA

BrandAllen-Bradley / Rockwell Automation
SeriesStratix 5700
Part Number1783-BMS20CA
Product typeManaged Ethernet switch
Total Ports20
Fiber ports2
RJ45 ports16
Combo ports2
DLRYes
Weight4.5 pounds
Input voltage12 to 48 Volts DC
BrandAllen-Bradley / Rockwell Automation
SeriesStratix 5700
Part Number1783-BMS20CA
Product typeManaged Ethernet switch
Total Ports20
Fiber ports2
RJ45 ports16
Combo ports2
DLRYes
Weight4.5 pounds
Input voltage12 to 48 Volts DC
s

About 1783-BMS20CA

The Allen-Bradley 1783-BMS20CA switch is a 20-port industrial managed Ethernet switch. The 1783-BMS20CA switch belongs to the Stratix 5700 product line. There are 2 SFP (fiber) ports on the 1783-BMS20CA switch which support Fast Ethernet connectivity. In addition, there are 2 combo ports and 16 RJ45 ports. The combo ports and the RJ45 ports support Fast Ethernet connectivity. The total number of ports available on the 1783-BMS20CA switch is 20. DLR is a Layer 2 protocol which provides media redundancy in a ring topology. DLR provides rapid network fault detection and reconfiguration to support demanding applications that require maximum network uptime.



 



Dimensions of the 1783-BMS20CA switch are 5.1 x 5 x 5.345 inches. The approximate weight of the 1783-BMS20CA switch is 4.5 pounds. Operating range of input voltages for the switch is 12 to 48 Volts DC. The maximum power consumed by the 1783-BMS20CA switch is 30 Watts and the typical power consumed at 24 Volts DC and 40 degrees Celsius is 21 Watts. The current consumption of the 1783-BMS20CA switch can go up to a maximum of 3 Amps. The minimum current consumption is 0.5 Amps. The 1784-SD1 memory module can be used to increase the switch memory if required. The operating and non-operating temperature ranges are -40 to 140 degrees Fahrenheit and -40 to 185 degrees Fahrenheit, respectively. The non-condensing relative humidity around the 1783-BMS20CA switch should be kept between 5 and 95%. The operating and non-operating shock ratings are 30 G and 50 G, respectively.

Repair Services for 1783-BMS20CA

Type Lead Time Price Action
Repair Service 2-4 weeks $2112cartAdd to Cart

Our highly skilled technicians can repair your 1783-BMS20CA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1783-BMS20CA

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1783-BMS20CA

Resolutions For 1783-BMS20CA

About

Technical Specifications for 1783-BMS20CA

BrandAllen-Bradley / Rockwell Automation
SeriesStratix 5700
Part Number1783-BMS20CA
Product typeManaged Ethernet switch
Total Ports20
Fiber ports2
RJ45 ports16
Combo ports2
DLRYes
Weight4.5 pounds
Input voltage12 to 48 Volts DC
BrandAllen-Bradley / Rockwell Automation
SeriesStratix 5700
Part Number1783-BMS20CA
Product typeManaged Ethernet switch
Total Ports20
Fiber ports2
RJ45 ports16
Combo ports2
DLRYes
Weight4.5 pounds
Input voltage12 to 48 Volts DC

About 1783-BMS20CA

The Allen-Bradley 1783-BMS20CA switch is a 20-port industrial managed Ethernet switch. The 1783-BMS20CA switch belongs to the Stratix 5700 product line. There are 2 SFP (fiber) ports on the 1783-BMS20CA switch which support Fast Ethernet connectivity. In addition, there are 2 combo ports and 16 RJ45 ports. The combo ports and the RJ45 ports support Fast Ethernet connectivity. The total number of ports available on the 1783-BMS20CA switch is 20. DLR is a Layer 2 protocol which provides media redundancy in a ring topology. DLR provides rapid network fault detection and reconfiguration to support demanding applications that require maximum network uptime.



 



Dimensions of the 1783-BMS20CA switch are 5.1 x 5 x 5.345 inches. The approximate weight of the 1783-BMS20CA switch is 4.5 pounds. Operating range of input voltages for the switch is 12 to 48 Volts DC. The maximum power consumed by the 1783-BMS20CA switch is 30 Watts and the typical power consumed at 24 Volts DC and 40 degrees Celsius is 21 Watts. The current consumption of the 1783-BMS20CA switch can go up to a maximum of 3 Amps. The minimum current consumption is 0.5 Amps. The 1784-SD1 memory module can be used to increase the switch memory if required. The operating and non-operating temperature ranges are -40 to 140 degrees Fahrenheit and -40 to 185 degrees Fahrenheit, respectively. The non-condensing relative humidity around the 1783-BMS20CA switch should be kept between 5 and 95%. The operating and non-operating shock ratings are 30 G and 50 G, respectively.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2112cartAdd to Cart

Our highly skilled technicians can repair your 1783-BMS20CA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $2112cartAdd to Cart

Our highly skilled technicians can repair your 1783-BMS20CA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF