DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1783-ZMS4T4E2TGN. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Weight | 8.86 lbs (4 kg) |
Enclosure Type Rating | IP66, IP67, and Type 6 |
Max Ground Terminal Screw Torque | 10.0 in*lb (1.13 N*m) |
Ground Connection Wire Size | 12 AWG (4.0 mm2) min, stranded copper wire |
NAT | Yes |
DLR | Yes |
CIP Sync (IEEE 1588) | Yes |
M12 X-Code Ports | 2 Gigabit Ethernet |
PoE/PoE+ Ports | 4 Fast Ethernet |
Dimensions | 9.35 x 9.6 x 3.8 in (23.75 x 24.38 x 9.9 cm) |
M12 D-Code Ports | 4 Fast Ethernet |
Total Ports | 10 |
Part Number/Catalog No. | 1783-ZMS4T4E2TGN |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Weight | 8.86 lbs (4 kg) |
Enclosure Type Rating | IP66, IP67, and Type 6 |
Max Ground Terminal Screw Torque | 10.0 in*lb (1.13 N*m) |
Ground Connection Wire Size | 12 AWG (4.0 mm2) min, stranded copper wire |
NAT | Yes |
DLR | Yes |
CIP Sync (IEEE 1588) | Yes |
M12 X-Code Ports | 2 Gigabit Ethernet |
PoE/PoE+ Ports | 4 Fast Ethernet |
Dimensions | 9.35 x 9.6 x 3.8 in (23.75 x 24.38 x 9.9 cm) |
M12 D-Code Ports | 4 Fast Ethernet |
Total Ports | 10 |
Part Number/Catalog No. | 1783-ZMS4T4E2TGN |
Allen Bradley’s 1783-ZMS4T4E2TGN Industrial Ethernet switch is made to provide dependable network connectivity and is ideally used where widely distributed applications are required.
The 1783-ZMS4T4E2TGN has a total of 10 ports, made up of four (4) fast Ethernet M12 D-code Ports, two (2) M12 X-code Ports and (4) PoE/PoE Plus 10/100 Ports to improve its performance in the networking market. The 1783-ZMS4T4E2TGN uses the normal voltage range of 48 to 54 Volts DC, but its practical voltage utilization range may vary between 50 and 57 Volts DC. It consumes a maximum 11.5 Watts of power at 24 Volts of DC power and has dimensions of 9.35 x 9.60 inches (238 x 244 millimeters). Its prim operating temperature range can fluctuate between -40 degrees and 60 degrees Celsius.
The 1783-ZMS4T4E2TGN helps secure the enterprise network by using the Built-in Cisco Internet Operating System (IOS). It also uses predefined Logix tags to monitor activity and for port control. By using a secure digital card (SD card) system, the device’s replacement procedure has been significantly simplified. Its security system is tightened by adding an access control list, which ensures that only authorized devices, users, and traffic can access the network. It also reduces the commissioning time by using Integrated Network Address Translation (NAT) which provides 1:1 IP address mapping. With both DLR and CIP Sync, this unit’s ground connection wire should have a size of 12 AWG (4.0 squared millimeters) made of stranded copper wire. Its maximum ground terminal screw has a 10.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1783-ZMS4T4E2TGN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1783-ZMS4T4E2TGN such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1783-ZMS4T4E2TGN Ser A
|
1783-ZMS4T4E2TGN/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Weight | 8.86 lbs (4 kg) |
Enclosure Type Rating | IP66, IP67, and Type 6 |
Max Ground Terminal Screw Torque | 10.0 in*lb (1.13 N*m) |
Ground Connection Wire Size | 12 AWG (4.0 mm2) min, stranded copper wire |
NAT | Yes |
DLR | Yes |
CIP Sync (IEEE 1588) | Yes |
M12 X-Code Ports | 2 Gigabit Ethernet |
PoE/PoE+ Ports | 4 Fast Ethernet |
Dimensions | 9.35 x 9.6 x 3.8 in (23.75 x 24.38 x 9.9 cm) |
M12 D-Code Ports | 4 Fast Ethernet |
Total Ports | 10 |
Part Number/Catalog No. | 1783-ZMS4T4E2TGN |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Weight | 8.86 lbs (4 kg) |
Enclosure Type Rating | IP66, IP67, and Type 6 |
Max Ground Terminal Screw Torque | 10.0 in*lb (1.13 N*m) |
Ground Connection Wire Size | 12 AWG (4.0 mm2) min, stranded copper wire |
NAT | Yes |
DLR | Yes |
CIP Sync (IEEE 1588) | Yes |
M12 X-Code Ports | 2 Gigabit Ethernet |
PoE/PoE+ Ports | 4 Fast Ethernet |
Dimensions | 9.35 x 9.6 x 3.8 in (23.75 x 24.38 x 9.9 cm) |
M12 D-Code Ports | 4 Fast Ethernet |
Total Ports | 10 |
Part Number/Catalog No. | 1783-ZMS4T4E2TGN |
Allen Bradley’s 1783-ZMS4T4E2TGN Industrial Ethernet switch is made to provide dependable network connectivity and is ideally used where widely distributed applications are required.
The 1783-ZMS4T4E2TGN has a total of 10 ports, made up of four (4) fast Ethernet M12 D-code Ports, two (2) M12 X-code Ports and (4) PoE/PoE Plus 10/100 Ports to improve its performance in the networking market. The 1783-ZMS4T4E2TGN uses the normal voltage range of 48 to 54 Volts DC, but its practical voltage utilization range may vary between 50 and 57 Volts DC. It consumes a maximum 11.5 Watts of power at 24 Volts of DC power and has dimensions of 9.35 x 9.60 inches (238 x 244 millimeters). Its prim operating temperature range can fluctuate between -40 degrees and 60 degrees Celsius.
The 1783-ZMS4T4E2TGN helps secure the enterprise network by using the Built-in Cisco Internet Operating System (IOS). It also uses predefined Logix tags to monitor activity and for port control. By using a secure digital card (SD card) system, the device’s replacement procedure has been significantly simplified. Its security system is tightened by adding an access control list, which ensures that only authorized devices, users, and traffic can access the network. It also reduces the commissioning time by using Integrated Network Address Translation (NAT) which provides 1:1 IP address mapping. With both DLR and CIP Sync, this unit’s ground connection wire should have a size of 12 AWG (4.0 squared millimeters) made of stranded copper wire. Its maximum ground terminal screw has a 10.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1783-ZMS4T4E2TGN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1783-ZMS4T4E2TGN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1783-ZMS4T4E2TGN such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1783-ZMS4T4E2TGN Ser A
|
1783-ZMS4T4E2TGN/A, Series A, Rev A | Request Quote |