1783-MS06T - In Stock | Allen Bradley PLC Stratix Managed Switches

1783-MS06T

Rated 4.9 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1783-MS06T

Description: The 1783-MS06T switch is a 6-port managed switch by Allen-Bradley. The switch features 6 or 10 copper ports and it is a Layer 2 switch.
In Stock Ships Today
Request a quote for 1783-MS06T

Description:

The 1783-MS06T switch is a 6-port managed switch by Allen-Bradley. The switch features 6 or 10 copper ports and it is a Layer 2 switch.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1783-MS06T.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 16 reviews

    Technical Specifications for 1783-MS06T

BrandAllen-Bradley / Rockwell Automation
SeriesStratix Managed Switches
Part Number1783-MS06T
Number of ports 6
Number of copper ports 4
Number of Combo ports 2
Expansion Ports Copper, Fiber, SFP, and Power over Ethernet (PoE)
UPC10612598347718
BrandAllen-Bradley / Rockwell Automation
SeriesStratix Managed Switches
Part Number1783-MS06T
Number of ports 6
Number of copper ports 4
Number of Combo ports 2
Expansion Ports Copper, Fiber, SFP, and Power over Ethernet (PoE)
UPC10612598347718
s

About 1783-MS06T

Manufactured by Allen-Bradley, the 1783-MS06T switch is a 6-port base switch classified under the Stratix 8000 series. The 1783-MS06T switch is a Layer 2 base module with a total number of 4 copper ports, while the total number of combo ports is 2. The 1783-MS06T switch comes with two dual-purpose ports that support the SFP slots. This industrial Ethernet switch supports the power over the Ethernet network expansion, helping to minimize the cost of installing power cables. Moreover, the 1783-MS06T switch delivers management and diagnosis data through the use of IT or the control environments. To ensure easier replacement of devices, the unit supports the CompactFlash memory, which has the ability to support simplified device replacement.



 



The 1783-MS06T switch supports an inrush current of 2.0 Amps maximum. The rated switch input current stands at a maximum of 2 Amps at 18 to 60 Volts DC, CL2/SELV.  The managed switch features an alarm relay rating of 1 Amps maximum at 30 Volts DC, CL2/SELV. The power dissipation is rated at 15.1 Watts. For isolation voltage, the unit features 75 Volts (Continous) voltage with a basic insulation type. The manufacturer recommends that the Ethernet connections be made in accordance with the IEC 60603-7 standards for the RJ45 connectors. The 1783-MS06T switch supports the 1783-MCF memory card. The ambient operating temperature should be maintained between -40 and 60 degrees Celsius, and while it is in storage, the surrounding temperature should fall within the range of -40 to 85 degrees Celsius. The recommended relative humidity range is 5% to 95%, non-condensing.



Repair Services for 1783-MS06T

Type Lead Time Price Action
Repair Service 2-4 weeks $492cartAdd to Cart

Our highly skilled technicians can repair your 1783-MS06T. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1783-MS06T

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1783-MS06T

Resolutions For 1783-MS06T

About

Technical Specifications for 1783-MS06T

BrandAllen-Bradley / Rockwell Automation
SeriesStratix Managed Switches
Part Number1783-MS06T
Number of ports 6
Number of copper ports 4
Number of Combo ports 2
Expansion Ports Copper, Fiber, SFP, and Power over Ethernet (PoE)
UPC10612598347718
BrandAllen-Bradley / Rockwell Automation
SeriesStratix Managed Switches
Part Number1783-MS06T
Number of ports 6
Number of copper ports 4
Number of Combo ports 2
Expansion Ports Copper, Fiber, SFP, and Power over Ethernet (PoE)
UPC10612598347718

About 1783-MS06T

Manufactured by Allen-Bradley, the 1783-MS06T switch is a 6-port base switch classified under the Stratix 8000 series. The 1783-MS06T switch is a Layer 2 base module with a total number of 4 copper ports, while the total number of combo ports is 2. The 1783-MS06T switch comes with two dual-purpose ports that support the SFP slots. This industrial Ethernet switch supports the power over the Ethernet network expansion, helping to minimize the cost of installing power cables. Moreover, the 1783-MS06T switch delivers management and diagnosis data through the use of IT or the control environments. To ensure easier replacement of devices, the unit supports the CompactFlash memory, which has the ability to support simplified device replacement.



 



The 1783-MS06T switch supports an inrush current of 2.0 Amps maximum. The rated switch input current stands at a maximum of 2 Amps at 18 to 60 Volts DC, CL2/SELV.  The managed switch features an alarm relay rating of 1 Amps maximum at 30 Volts DC, CL2/SELV. The power dissipation is rated at 15.1 Watts. For isolation voltage, the unit features 75 Volts (Continous) voltage with a basic insulation type. The manufacturer recommends that the Ethernet connections be made in accordance with the IEC 60603-7 standards for the RJ45 connectors. The 1783-MS06T switch supports the 1783-MCF memory card. The ambient operating temperature should be maintained between -40 and 60 degrees Celsius, and while it is in storage, the surrounding temperature should fall within the range of -40 to 85 degrees Celsius. The recommended relative humidity range is 5% to 95%, non-condensing.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $492cartAdd to Cart

Our highly skilled technicians can repair your 1783-MS06T. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $492cartAdd to Cart

Our highly skilled technicians can repair your 1783-MS06T. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF