|Warranty:||1 year DO Supply Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the 6186-M12AL.|
|Exchange:||Exchange credit for your defective unit available.|
The Allen-Bradley 6186-M12AL VersaView industrial panel monitor has a 12-inch display but no touchscreen input. The auto-ranging input power of the 6186-M12AL is 90-264V AC, at a line frequency of 47-63 Hz, and a maximum power consumption of 12 W. It has a 20 g operating shock at ½ sine for 11 ms and a 2 g peak operating vibration at 53-640 Hz sine. This monitor can operate at a temperature range of 32-122oF, and it can be stored at a temperature ranges of -4-140 oF, and its ambient relative humidity range for storage and operation is 10-90%, non-condensing. The on-screen display (OSD) of the 6186-M12ALTR monitor allows you to configure its OSD time-out timer, the manual color adjustment, the power on/off, the automatic screen setup, sync detection, contrast, display resolution information, brightness, factory settings reset, sharpness, and the OSD lock and unlock function. Its video bandwidth is 50 MHz (maximum video dot clock) and has an RGB analog video input signal.
The 6186-M12AL has a 9.7 x 7.3 inches display area, a 150:1 contrast ratio, and an 800 x 600-pixel native resolution. It uses an active matrix thin film transistor display that has 256K colors. The 6186-M12ALTR comes with a backlight with 4 cold cathode tubes (CCT) that has a typical luminance of 250 cd/m2 (Nits) and an average lifespan of 30,000 hours at half brightness. Note that this monitor also has an aluminum bezel.
This monitor uses External Input to input information. The 32 or 64-bit software and FactoryTalk View provide convenient interfaces. There is 24V DC input power and this monitor uses communication cables.
The 6186M Industrial Monitor series consists of 1200M, 1500M, 1700M, and 1900M product lines. Each terminal delivers a vivid, clear picture, analog and digital video input (DVI) function, and single button automatic setup. They are rated for Class 1 Division 2 hazardous environments, which provide unparalleled performance and reliability in rugged industrial environments, such as Food and Beverage areas. These devices provide first-rate protection against shock and heat. Monitors can adapt to the needs of the operators on the factory floor with various mount and interface configurations.