6186-M15ALTR

The Allen-Bradley 6186-M15ALTR VersaView 15-inch industrial monitor has an active matrix thin film transistor display that is a resistive touchscreen with a 1024 x 768 native resolution and a 12 x 9-inch display area. It comes with 16.7 million color graphics and a 500:1 contrast ratio. This monitor also uses a backlight comprised of 4 bulbs cold cathode tubes bulbs that have an average lifespan of 50,000 hours when used at half-brightness and a typical luminance of 250 cd/m2 (Nits). Also equipped with the 6186-M15ALTR monitor is a resistive antiglare shield and an aluminum bezel.

The auto-ranging input voltage of the 6186-M15ALTR monitor is 90-264V AC, the line frequency is 47-63 Hz, and the maximum power consumption is 24 W. Its operating shock is 20 g at ½ sine for 11 ms, while its operating vibration is 2 g peak at 10-63 Hz. The 6186-M15ALTR’s operating temperature is 5-50 oC and its storage temperature is -20-60 oC. Note that this touchscreen monitor has a response time of 16 ms on average.

You can configure the settings of the 6186-M15ALTR by using its OSD controls and these settings include the horizontal/vertical position settings, the automatic screen setup, the OSD locked and unlocked settings, the brightness settings, the sharpness settings, the contrast settings, the manual color adjustment settings, the OSD time-out timer settings, power on/off, and the display resolution information settings. The 6186-M15ALTR uses an RGB analog video input signal and a video bandwidth of 80 MHz.