The Allen-Bradley 6186M-15PT is part of the industrial performance monitor product bulletin. This monitor is designed for use in a wide variety of application range in different industries. This monitor mainly features a 15-inch display screen with resolution of 1024 x 768 pixels in 16.7 million colors. This monitor is also provided with touch sensitive cells, utilizing resistive touch screen technology, allowing users to interact with the host computer via touch actions.

The 6186M-15PT is designed with an aluminum bezel and requires installation to a NEMA UL 50 Type 1, 4, 4X, 12, and IP66 rated enclosure. It supports panel mounting and supports a wide viewing angle, specifically, less than or equal 60o. Being a 1500M monitor, it requires a panel cutout of 285.6 x 386.6 mm or 11.24 x 15.22 in. Additionally, required mounting clearances are 51 mm or 2.0 inches back and side clearances and 77 mm or 3.0 inches top and bottom clearances. Enclosure used mut be a gauge 14 material for appropriate sealing, preventing entry of water and dust.

The 6186M-15PT supports other display resolutions such as 720 x 400 @ 70 Hz; 640 x 480 @ 60 Hz and 75 Hz; 800 x 600 @ 60 Hz, and 75 Hz; 1024 x 768 @ 60 Hz, 70 Hz, and 75 Hz; and 1280 x 1024 @ 60 Hz, and 75 Hz. This motor is provided with One (1) analog video connector HD-15 VGA and DVI port digital video signal. It also has embedded USB port, One Type B port located on the back side as the host computer port and Three (3) USB 2.0 port, One (1) on the front side and Two (2) on the back size.

The Allen-Bradley 6186M-15PT Industrial Performance Monitor provides the latest in LCD flat panel technology. This monitor has a 15-inch resistive touchscreen display size and the display area is 304 x 228 millimeters. This monitor comes with 1024 x 768 resolution in native mode. It also includes 16.2 million colors. The luminance of the 6186M-15PT is 450 cd/m2 (Nits). The typical contrast ratio is 700:1. The aspect ratio of this monitor is 4:3. The Allen-Bradley 6186M-15PT has a typical response time of fewer than 35 milliseconds. The resolution of the 6186M-15PT monitor has 3 refresh rates: 60 Hertz, 70 Hertz, and 75 Hertz. The minimum backlight half-life of this monitor is 50,000 hours at 25 degrees Celsius. There is an Aluminum bezel. Do not adjust the monitor brightness higher than the factory default settings because this may reduce the life of the LCD screen. The backlight unit on this monitor contains mercury. At the end of its life, this equipment must be collected separately from municipal solid waste.

The Allen-Bradley 6186M-15PT has a video bandwidth of 80 MHz. It also comes with a maximum video dot clock. The video input signal of this monitor is RGB analog. This monitor has 2 video input connectors: the analog video signal is HD-15 VGA and the digital video signal is DVI. The Allen-Bradley 6186M-15PT also provides 2 types of USB ports. These are the USB A 2.0 ports (1 in the front and 2 in the back) and the USB B port in the back (host computer port). It has a current capacity of 500 mA per port. There is a 100 to 240 Volt AC or 9 to 36 Volt DC input power and a monitor that uses communication cables.