Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Plus 6180P 6181P-15NP2KH

Product image is representative; revision or series may vary. Contact us to request a specific version.

6181P-15NP2KH

|
Need a Specific Revision?

The Allen-Bradley VersaView 6181P-15NP2KH Performance Integrated Display Computer is a 15-inch touchscreen HMI equipped with a Pentium Intel Core i3-4102E processor and an integrated DDRR AM memory of 1 GB of RAM.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 6181P-15NP2KH

ManufacturerAllen Bradley
CategoryVersaViews
Product LinePlus 6180P
Part Number6181P-15NP2KH
Weight23.00 lbs (10.43 kg)
Temperature, operating32…131 degrees Fahrenheit
Temperature, nonoperating-4…140 degrees Fahrenheit
Relative humidity10…90% noncondensing at 50%
Shock, operating15 g (1/2 sine, 11 ms)
Vibration, operating0.012 in. p-p, 10…57 Hz, 2 g peak, 57…640 Hz
Altitude, operatingSea level to 2,000 m (6,562 ft)
Input voltage100…240V, autoranging
Input power100…240V; 1.8…0.75 A 50/60 Hz; 180VA
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 6181P-15NP2KH has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 6181P-15NP2KH units instead of migration.

Request a Repair

The Allen-Bradley VersaView 6181P-15NP2KH Performance Integrated Display Computer has a 15-inch touchscreen and it is an Allen-Bradley Workstation with a Pentium Intel Core i3-4102E processor and an integrated DDRR AM memory that is 1 GB of RAM. It is not only a typical Human Machine Interface (HMI) but it is also a full industrial processor that serves as a control interface for the operators and maintenance crews so they can gain access to a whole machine control algorithm from a single point.

The open-type construction of the Allen-Bradley VersaView 6181P-15NP2KH Performance Integrated Display Computer requires the computer to be installed inside a protected enclosure to keep it away from humidity, dirt, and debris. When installed properly, this workstation’s display can be installed in a NEMA Type 12, IP 66 rated enclosure. The rear part of the Allen-Bradley VersaView 6181P-15NP2KH Performance Integrated Display Computer should not be exposed to the elements and it must be protected inside an enclosure as well. External serial communication ports, Ethernet ports, and a power supply port are located at the bottom part of the computer inside the protective enclosure. It is possible to install the computer in both landscape and portrait orientations. A grounded, 3-prong IEC60320-C13 power cord provides power to the computer by using a 100 to 240 Volts AC power supply. Because the computer is a highly sophisticated piece of equipment with many ESD-sensitive parts, only properly trained personnel should be allowed to perform the cleaning, maintenance, or any other type of service to the industrial workstation.