6181P-12A2SE71AC

The 6181P-12A2SE71AC is an industrial computer from the 6181 series by Allen Bradley. It has an integrated 12.1-inch display and an aluminum bezel with a 4:3 aspect ratio. The 6181P-12A2SE71AC has a resistive touchscreen technology and features a built-in 32 GB SSD storage. The 6181P-12A2SE71AC has various ports such as audio line-in jack, audio line-out jack, serial COM ports, LAN ports, DVI-I ports PCI, power switch, power input, USB 3.0, CF card slot, PS2 port for mouse and keyboard. On its front, this module also features indicators that will indicate the status of this module’s power source, the disk read status, and system health status. The 6181P-12A2SE71AC has a multi-touch PCAP touchscreen and can support up to two simultaneous touches along with common gesturing features and can be operated even when the operator is wearing a pair of gloves. The calibration for the screens is done in the factory, so no calibration is required for the touchscreen.

To comply with the EN 55024 and EN 55032, it is recommended that shielded cables be used for all the connections, except for the power cable. It is important to note that only the supplied power cable shipped with the system should be used for this module. While installing the system, ensure that the installation site has sufficient power and that the computer is plugged into a grounded outlet. The grounded outlet helps to discharge the static electricity, which can be easily built up in dry environments. There should be sufficient space around the air inlets and the outlets to allow ventilation and cooling in order to ensure a longer life of the device and to prevent heat-up of components. The ambient temperature where the device is installed should be between 0 and 50 degrees Celsius.