Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1403 Powermonitor II 1403-LM05B

1403-LM05B

|

The Allen-Bradley 1403-LM05B Limited Metering Master Module has 5 Current Inputs, a 24V AC 50/60 Hz or 24/48V DC Power Supply, and a 120V-347V Nominal Full Scale Voltage Input.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
  • We sell industrial automation parts backed by our 2-year DO Supply Warranty.

  • Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.

  • AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.

  • Repairs and exchanges are available for all automation products.

  • Reseller Options

    Drop shipping, blind shipping, and account shipping with no extra fees.

Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 1403-LM05B

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1403-LM05B
Product TypeLimited Metering Master Module
Current Inputs5
Power Supply24V AC 50/60 Hz or 24/48V DC
Nominal Full Scale Voltage Input120V-347V
Input Impedance1 Meg-Ohm min.
Nominal Full Scale Current Input0-5 A
Status InputsInternal 24V DC
Motor Load Switching1/3 HP at 125V AC
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1403-LM05B is a Limited Metering Powermonitor II module from Allen-Bradley. The drive is used in automation systems to measure and calculate power parameters. The 1403-LM05B has a normal measured current of 5 Amps, a measured voltage of between 120 and 347 volts L-N and 2018 to 6000 volts L-L. The 1403-LM05B, as with other Limited Metering Powermonitor II modules (including the Allen-Bradley 1403-LM05A, 1403-LM01A, and the 1403-LM01B), the 1403-LM05B operates in both AC and DC voltages where it accommodates a 24 Volts AC voltage at a frequency of 50/60 hertz or at a voltage of 24 to 48 Volts DC.

As with the power monitors in the Bulletin 1400 series, the 1403-LM05B has an onboard microprocessor which controls the whole module. This renders it usable as a component in an elaborate monitoring network or as a stand-alone power monitor. Additionally, modules in the Bulletin 1400 series, including the 1403-LM05B, have CSA, UL, and CE approvals. They also follow the CSA 61010-1, EN 50081-2, and EN 50082-2 standards, among others. For the optimal performance of the 1403-LM05B, it should be operated within a temperature of between 0 and 50 degrees Celsius and a humidity of between 5 and 95% without condensation. When not in operation, the 1403-LM05B should be stored at a temperature range of -30 degrees Celsius and 70 degrees Celsius. The communication architecture for the 1403-LM05B Powermonitor II module has a fiber optic option which can be used to connect a maximum of three display modules together. The display modules are used to prepare the 1403-LM05B for operation. The 1403-LM05B, as with other modules with the 1403-LM family, has a +/-0.1 normal fixed accuracy and a 90 milliseconds fixed update rate.

Revision Part #Also known as
1403-LM05B Ser A1403-LM05B/A, Series A, Rev A
Request a quote
1403-LM05BX1403-LM05B/X, Series X, Rev X
Request a quote
Don't see your particular revision? Contact us now.