Description: The Allen-Bradley 1403-MM05B Master Module has 5 Current Inputs, a 24V AC 50/60 Hz or 24/48V DC Power Supply, and a 120V-347V Nominal Full Scale Voltage Input.
|Warranty:||1 year DO Supply Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the 1403-MM05B.|
|Exchange:||Exchange credit for your defective unit available.|
To Speak to a sales representative for pricing & lead time:
The 1403-MM05B is a master module for power monitors manufactured by Allen-Bradley and classified under the Power Monitor II Series. The 1403-MM05B offers a selectable accuracy (+/-0.1 nominal) and also has a fixed update rate of 90 Milliseconds. In cases where the update rate is critical, the 1403-MM05B user has the ability to select additional filtering mode. This feature is important in that it allows the user to trade update speed for accuracy. The 1403-MM05B master module provides simultaneous oscillography types. Among the two oscillography types are Simultaneous 7-channel double cycle oscillography and the other one is user-configurable simultaneous 2-channel 12-cycle oscillography with 8 cycles of pre-trigger data. The measured nominal current is 5 Amps whereas the measured voltage is 120 Volts to 347 Volts L-N (208 Volts to 600 Volts L-L). The required power supply for the 1403-MM05B is 24 Volts AC and 50 to 60 Hertz for the AC power supply. On the other side, the DC power supply carries up to 24 Volts or 48 Volts DC.
The 1403-MM05B master module accepts up to three display modules. For communication, there is a single and dual-port high-speed communication module. These 1403-MM05B communication modules cover a variety of networks. The 1403-MM05B date and time-stamping rate is 1/100 seconds, and it also supports extensive analog and digital I/O connectivity. Therefore the user of the 1403-MM05B gets to record the time-stamped data logging of the system measurements and also the events that are occurring. The 1403-MM05B’s Ethernet-supported communication card connects to the Allen-Bradley PLC 5 Ethernet processors. In addition, the communication card comes with internet web page support. The Ethernet communication rate on the 1403-MM05B is 10 Mbps. As illustrated earlier, the 1403-MM05B master module supports up to three display modules. It is an easy-to-install master module since it also comes with the display software.Technical specifications:
|Part Number/Catalog No.:||1403-MM05B|
|Product Type:||Master Module|
|Power Supply:||24V AC 50/60 Hz or 24/48V DC|
|Nominal Full Scale Voltage Input:||120V-347V|
|Input Impedance:||1 Meg-Ohm min.|
|Nominal Full Scale Current Input:||0-5 A|
|Status Inputs:||Internal 24V DC|
|Motor Load Switching:||1/3 HP at 125V AC|