2706-E43J128B1

Rated 4.3 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2706-E43J128B1

Description: The 2706-E43J128B1 terminal is a message display terminal that has been designed and manufactured by Allen-Bradley/Rockwell Automation. It is part of the Allen-Bradley Dataliner DL40 terminal series. The 2706-E43J128B1 message display terminal can communicate with Allen-Bradley PLCs and SLCs and it can also be connected to other Allen-Bradley display terminals to create a multi-display system. It operates with 85 to 264 Volts AC input voltage. The 2706-E43J128B1 message display terminal comes with 128 KB of RAM.
Available Now
Request a quote for 2706-E43J128B1

Description: The 2706-E43J128B1 terminal is a message display terminal that has been designed and manufactured by Allen-Bradley/Rockwell Automation. It is part of the Allen-Bradley Dataliner DL40 terminal series. The 2706-E43J128B1 message display terminal can communicate with Allen-Bradley PLCs and SLCs and it can also be connected to other Allen-Bradley display terminals to create a multi-display system. It operates with 85 to 264 Volts AC input voltage. The 2706-E43J128B1 message display terminal comes with 128 KB of RAM.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2706-E43J128B1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 14 reviews

    Technical Specifications for 2706-E43J128B1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2706-E43J128B1
Product LineDL40
Display Size6.2 x 14.4 in.
Display ColorVacuum Fluorescent Display (VFD)
Input TypeASCII
Communication Remote I/O
Input Power85-264V AC
Memory128K RAM
Enclosure TypeNEMA Type 12, 13
Line Count4
Character Count20
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2706-E43J128B1
Product LineDL40
Display Size6.2 x 14.4 in.
Display ColorVacuum Fluorescent Display (VFD)
Input TypeASCII
Communication Remote I/O
Input Power85-264V AC
Memory128K RAM
Enclosure TypeNEMA Type 12, 13
Line Count4
Character Count20
s

About 2706-E43J128B1

The Allen-Bradley 2706-E43J128B1 is a PanelView DataLiner DL40 Plus message display. The screen features a Vacuum Fluorescent Display (VFD) that has the capacity to display 4 lines of texts with each line having as many as 20 characters. You can use standard or extended ASCII characters for this display. This display's characters are in a 5 x 7 dot matrix format and measure 0.44 inches. Both uppercase and lowercase letters can be displayed and the extended ASCII characters allow you to input text in foreign languages. You can view messages from as far as 25 feet away. The entire 2706-E43J128B1 display measures 6.2 x 14.4 x 4.9 inches and weighs 9.2 lbs. 

A remote I/O port that appears as a 1/4, 1/2, 3/4, or full I/O rack is available. This I/O port can support either single transfers or block transfers of input and output data and it has a communication rate of 57.6, 115.2, or 230.4 kbps. Connecting a keyboard directly to the display is possible with its built-in IBM PC keyboard port and this lets you input messages conveniently. This port also has two serial ports, an RS-485 port and an RS-232 port, with the RS-232 port having an auto wake-up function when you program the display offline and allowing point-to-point slave display communications. This display can be connected to DL10 and DL50 slaves if you want to have a multiple display system. Power failure is not an issue because the 2706-E43J128B1 allows quick recovery of messages after a power outage. It also comes with a 128 KB RAM where you can save your messages.

Other features of the 2706-E43J128B1 display are remote I/O PassThrough, optional universal remote I/O communication, diagnostic and alarm handling functions, front panel push buttons, and multiple run modes (specifically message/variable run mode, message/variable slave run mode, bit trigger run mode, and message list run mode).

The 2706-E43J128B1 display has an input voltage range of 85-264V AC at 47-63 Hz and a maximum input power of 45 VA at 85V AC. Its operating temperature ranges from 0-60 ËšC and its storage temperature ranges from -40-85 ËšC. The 2706-E43J128B1 has an enclosure rating of NEMA Type 12 or 13 and has a non-condensing relative humidity of 5-95%.



Technical Description of 2706-E43J128B1

DL40 series Message Display with 4 line, 20 character VFD and 85-264V AC input power and 128K RAM memory

Repair Services for 2706-E43J128B1

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2706-E43J128B1. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 2706-E43J128B1

Please refer to the manual for more information about the 2706-E43J128B1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2706-E43J128B1/A, Series A, Rev A Request Quote
2706-E43J128B1X
2706-E43J128B1/X, Series X, Rev X Request Quote
Common misspellings:
  • 27o6-E43J128B1
  • 2706-EA3J128B1
  • 2706-E43Jl28B1
  • 2706-E43J12bB1
  • 2706-E43J12881
  • 2706-E43J128Bl
  • 2706E43J128B1

Dimensions For 2706-E43J128B1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2706-E43J128B1

Resolutions For 2706-E43J128B1

About

Technical Specifications for 2706-E43J128B1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2706-E43J128B1
Product LineDL40
Display Size6.2 x 14.4 in.
Display ColorVacuum Fluorescent Display (VFD)
Input TypeASCII
Communication Remote I/O
Input Power85-264V AC
Memory128K RAM
Enclosure TypeNEMA Type 12, 13
Line Count4
Character Count20
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2706-E43J128B1
Product LineDL40
Display Size6.2 x 14.4 in.
Display ColorVacuum Fluorescent Display (VFD)
Input TypeASCII
Communication Remote I/O
Input Power85-264V AC
Memory128K RAM
Enclosure TypeNEMA Type 12, 13
Line Count4
Character Count20

About 2706-E43J128B1

The Allen-Bradley 2706-E43J128B1 is a PanelView DataLiner DL40 Plus message display. The screen features a Vacuum Fluorescent Display (VFD) that has the capacity to display 4 lines of texts with each line having as many as 20 characters. You can use standard or extended ASCII characters for this display. This display's characters are in a 5 x 7 dot matrix format and measure 0.44 inches. Both uppercase and lowercase letters can be displayed and the extended ASCII characters allow you to input text in foreign languages. You can view messages from as far as 25 feet away. The entire 2706-E43J128B1 display measures 6.2 x 14.4 x 4.9 inches and weighs 9.2 lbs. 

A remote I/O port that appears as a 1/4, 1/2, 3/4, or full I/O rack is available. This I/O port can support either single transfers or block transfers of input and output data and it has a communication rate of 57.6, 115.2, or 230.4 kbps. Connecting a keyboard directly to the display is possible with its built-in IBM PC keyboard port and this lets you input messages conveniently. This port also has two serial ports, an RS-485 port and an RS-232 port, with the RS-232 port having an auto wake-up function when you program the display offline and allowing point-to-point slave display communications. This display can be connected to DL10 and DL50 slaves if you want to have a multiple display system. Power failure is not an issue because the 2706-E43J128B1 allows quick recovery of messages after a power outage. It also comes with a 128 KB RAM where you can save your messages.

Other features of the 2706-E43J128B1 display are remote I/O PassThrough, optional universal remote I/O communication, diagnostic and alarm handling functions, front panel push buttons, and multiple run modes (specifically message/variable run mode, message/variable slave run mode, bit trigger run mode, and message list run mode).

The 2706-E43J128B1 display has an input voltage range of 85-264V AC at 47-63 Hz and a maximum input power of 45 VA at 85V AC. Its operating temperature ranges from 0-60 ËšC and its storage temperature ranges from -40-85 ËšC. The 2706-E43J128B1 has an enclosure rating of NEMA Type 12 or 13 and has a non-condensing relative humidity of 5-95%.



Technical Description of 2706-E43J128B1

DL40 series Message Display with 4 line, 20 character VFD and 85-264V AC input power and 128K RAM memory
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2706-E43J128B1. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2706-E43J128B1. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2706-E43J128B1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2706-E43J128B1/A, Series A, Rev A Request Quote
2706-E43J128B1X
2706-E43J128B1/X, Series X, Rev X Request Quote

Common misspellings:
  • 27o6-E43J128B1
  • 2706-EA3J128B1
  • 2706-E43Jl28B1
  • 2706-E43J12bB1
  • 2706-E43J12881
  • 2706-E43J128Bl
  • 2706E43J128B1
PDF