DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2711-K10C16L1 in 3-5 days. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2711-K10C16L1 |
Product Line | Panelview 1000 |
Display Size | 10.1 in. |
Display Color | Multi-Color |
Input Type | Keypad |
Communication | DF1 (RS-232) and Printer (RS-232) Port |
Input Power | 24 Volts Direct Current |
Memory | 256 Kilobytes |
Enclosure Type | NEMA Type 12/13 or 4X |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 2711-K10C16L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K10C16L1 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2711-K10C16L1 |
Product Line | Panelview 1000 |
Display Size | 10.1 in. |
Display Color | Multi-Color |
Input Type | Keypad |
Communication | DF1 (RS-232) and Printer (RS-232) Port |
Input Power | 24 Volts Direct Current |
Memory | 256 Kilobytes |
Enclosure Type | NEMA Type 12/13 or 4X |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 2711-K10C16L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K10C16L1 units instead of migration.
sAllen-Bradley/Rockwell Automation manufactures the 2711-K10C16L1 PanelView standard operator terminal, as part of PanelView 1000 series. It has an input power rating of 24 Volts DC, with a 10.1-inch multi-color display. This standard terminal has a keypad input type for entering information and commands to the machine as well as 256 KB of memory for the storage of data, files, and applications. The 2711-K10C16L1 PanelView 1000 standard terminal is housed inside a NEMA 12, 13, or 4x enclosure types. Generally, the Allen-Bradley PanelView 1000 standard graphics terminals feature a resolution of 640 x 480 and a 10-inch color or grayscale flat-screen display.
If the PanelView 1000 standard terminal does not start up correctly, be sure to check the power supply first. Also, ensure that the terminal is receiving the right voltage amount and that the connection and wiring to the primary source of power are correct and valid. Additionally, the positive and negative ends of the DC power source should be attached to the right terminals. The 2711-K10C16L1 PanelView 1000 standard terminal has status indicators located at the back. The green COMM indicator shows communication while the red FAULT indicator shows system faults. When the terminal starts up, the COMM indicator remains on while the FAULT indicator is off. If the FAULT indicator flashes a few times during startup, there is no cause for alarm. Nevertheless, if both the COMM and FAULT indicators off, the power cable should be checked.
Keypad-RS-232 (DF1) Communication and RS-232 Printer/Download Port 10 in. Color Display
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2711-K10C16L1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2711-K10C16L1 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2711-K10C16L1/A, Series A, Rev A | Request Quote | |
2711-K10C16L1/B, Series B, Rev B | Request Quote | |
2711-K10C16L1/C, Series C, Rev C | Request Quote | |
2711-K10C16L1/D, Series D, Rev D | Request Quote | |
2711-K10C16L1/E, Series E, Rev E | Request Quote | |
2711-K10C16L1/F, Series F, Rev F | Request Quote | |
2711-K10C16L1X
|
2711-K10C16L1/X, Series X, Rev X | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2711-K10C16L1 |
Product Line | Panelview 1000 |
Display Size | 10.1 in. |
Display Color | Multi-Color |
Input Type | Keypad |
Communication | DF1 (RS-232) and Printer (RS-232) Port |
Input Power | 24 Volts Direct Current |
Memory | 256 Kilobytes |
Enclosure Type | NEMA Type 12/13 or 4X |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2711-K10C16L1 |
Product Line | Panelview 1000 |
Display Size | 10.1 in. |
Display Color | Multi-Color |
Input Type | Keypad |
Communication | DF1 (RS-232) and Printer (RS-232) Port |
Input Power | 24 Volts Direct Current |
Memory | 256 Kilobytes |
Enclosure Type | NEMA Type 12/13 or 4X |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 2711-K10C16L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K10C16L1 units instead of migration.
Allen-Bradley/Rockwell Automation manufactures the 2711-K10C16L1 PanelView standard operator terminal, as part of PanelView 1000 series. It has an input power rating of 24 Volts DC, with a 10.1-inch multi-color display. This standard terminal has a keypad input type for entering information and commands to the machine as well as 256 KB of memory for the storage of data, files, and applications. The 2711-K10C16L1 PanelView 1000 standard terminal is housed inside a NEMA 12, 13, or 4x enclosure types. Generally, the Allen-Bradley PanelView 1000 standard graphics terminals feature a resolution of 640 x 480 and a 10-inch color or grayscale flat-screen display.
If the PanelView 1000 standard terminal does not start up correctly, be sure to check the power supply first. Also, ensure that the terminal is receiving the right voltage amount and that the connection and wiring to the primary source of power are correct and valid. Additionally, the positive and negative ends of the DC power source should be attached to the right terminals. The 2711-K10C16L1 PanelView 1000 standard terminal has status indicators located at the back. The green COMM indicator shows communication while the red FAULT indicator shows system faults. When the terminal starts up, the COMM indicator remains on while the FAULT indicator is off. If the FAULT indicator flashes a few times during startup, there is no cause for alarm. Nevertheless, if both the COMM and FAULT indicators off, the power cable should be checked.
Keypad-RS-232 (DF1) Communication and RS-232 Printer/Download Port 10 in. Color Display
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2711-K10C16L1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2711-K10C16L1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2711-K10C16L1 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2711-K10C16L1/A, Series A, Rev A | Request Quote | |
2711-K10C16L1/B, Series B, Rev B | Request Quote | |
2711-K10C16L1/C, Series C, Rev C | Request Quote | |
2711-K10C16L1/D, Series D, Rev D | Request Quote | |
2711-K10C16L1/E, Series E, Rev E | Request Quote | |
2711-K10C16L1/F, Series F, Rev F | Request Quote | |
2711-K10C16L1X
|
2711-K10C16L1/X, Series X, Rev X | Request Quote |