2711-NC17 | Allen Bradley Panelview 1000

2711-NC17

Rated 4.6 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711-NC17

Description: The Allen-Bradley 2711-NC17 RS-232 PanelView Standard operator interface communication cable is made for the Allen-Bradley PanelView Standard HMI terminals. This replacement cable assembly has a 3-meter cable with a 9-pin D-shell connector on both ends of the cable.
Available Now
Request a quote for 2711-NC17

Description:

The Allen-Bradley 2711-NC17 RS-232 PanelView Standard operator interface communication cable is made for the Allen-Bradley PanelView Standard HMI terminals. This replacement cable assembly has a 3-meter cable with a 9-pin D-shell connector on both ends of the cable.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711-NC17 in 3-5 days.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 13 reviews

    Technical Specifications for 2711-NC17

BrandAllen-Bradley / Rockwell Automation
SeriesPanelview 1000
Part number22711-NC17
DescriptionRS-232 Serial communication cable
Voltage rating85 to 264 Volts AC/24 Volts DC
Connector type9-pin D-shell connector
Compatible terminals PanelView Standard terminals (2711-KA1 and 2711-KC1 only)
Cable length3.0 meters
Application typeRemote RS-232 serial port access
EnclosureNEMA Type 12, 13, 4X
BrandAllen-Bradley / Rockwell Automation
SeriesPanelview 1000
Part number22711-NC17
DescriptionRS-232 Serial communication cable
Voltage rating85 to 264 Volts AC/24 Volts DC
Connector type9-pin D-shell connector
Compatible terminals PanelView Standard terminals (2711-KA1 and 2711-KC1 only)
Cable length3.0 meters
Application typeRemote RS-232 serial port access
EnclosureNEMA Type 12, 13, 4X
s

About 2711-NC17

The Allen-Bradley 2711-NC17 RS-232 Panelview Standard operator interface terminal communication cable is a serial communication cable for the Allen-Bradley PanelView Standard Human Machine Interface (HMI) terminals. The 2711-NC17 communication cable is compatible with the PanelView Standard and PanelView Enhanced operator terminals from Series F or later. The PanelView Standard operator interface terminals offer high-performance electronic interface solutions that meet all the operator’s needs. This series of intelligent HMIs feature advanced graphics capabilities and performance functionalities in grayscale, monochrome, and color graphics, and they are built with a space-saving blueprint for low cost and maximum performance.



 



The 2711-NC17 RS-232 communication cable is supplied as a cable assembly consisting of a 3-meter 9-pin D-shell to 9-pin D-shell RS-232 serial cable that provides a communication link for remote RS-232 serial port access, and some installation packages. The 2711-NC17 RS-232 serial cable connects directly to Serial Port 0 on the SLC 5/03, 5/04, or 5/05 controllers, or indirectly to the MicroLogix controller via the 1761-NET-AIC AIC+ module. The 2711-NC17 communication cable provides point-to-point connection to a MicroLogix controller and the Channel 0 port of an SLC controller via the Allen-Bradley DH-485 protocol.

Repair Services for 2711-NC17

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711-NC17. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 2711-NC17

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2711-NC17

Resolutions For 2711-NC17

About

Technical Specifications for 2711-NC17

BrandAllen-Bradley / Rockwell Automation
SeriesPanelview 1000
Part number22711-NC17
DescriptionRS-232 Serial communication cable
Voltage rating85 to 264 Volts AC/24 Volts DC
Connector type9-pin D-shell connector
Compatible terminals PanelView Standard terminals (2711-KA1 and 2711-KC1 only)
Cable length3.0 meters
Application typeRemote RS-232 serial port access
EnclosureNEMA Type 12, 13, 4X
BrandAllen-Bradley / Rockwell Automation
SeriesPanelview 1000
Part number22711-NC17
DescriptionRS-232 Serial communication cable
Voltage rating85 to 264 Volts AC/24 Volts DC
Connector type9-pin D-shell connector
Compatible terminals PanelView Standard terminals (2711-KA1 and 2711-KC1 only)
Cable length3.0 meters
Application typeRemote RS-232 serial port access
EnclosureNEMA Type 12, 13, 4X

About 2711-NC17

The Allen-Bradley 2711-NC17 RS-232 Panelview Standard operator interface terminal communication cable is a serial communication cable for the Allen-Bradley PanelView Standard Human Machine Interface (HMI) terminals. The 2711-NC17 communication cable is compatible with the PanelView Standard and PanelView Enhanced operator terminals from Series F or later. The PanelView Standard operator interface terminals offer high-performance electronic interface solutions that meet all the operator’s needs. This series of intelligent HMIs feature advanced graphics capabilities and performance functionalities in grayscale, monochrome, and color graphics, and they are built with a space-saving blueprint for low cost and maximum performance.



 



The 2711-NC17 RS-232 communication cable is supplied as a cable assembly consisting of a 3-meter 9-pin D-shell to 9-pin D-shell RS-232 serial cable that provides a communication link for remote RS-232 serial port access, and some installation packages. The 2711-NC17 RS-232 serial cable connects directly to Serial Port 0 on the SLC 5/03, 5/04, or 5/05 controllers, or indirectly to the MicroLogix controller via the 1761-NET-AIC AIC+ module. The 2711-NC17 communication cable provides point-to-point connection to a MicroLogix controller and the Channel 0 port of an SLC controller via the Allen-Bradley DH-485 protocol.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711-NC17. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711-NC17. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF