Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Panelview 1000 2711-NL7X

Product image is representative; revision or series may vary. Contact us to request a specific version.

2711-NL7X

|
Need a Specific Revision?

The 2711-NL7X serves as a replacement backlight for the Panelview 1000 Operator Interface Series C from Allen Bradley. With a modest weight of 0.04 pounds (0.02 kilograms), this backlight is compatible with existing installations of the Panelview 1000. It features a flat ribbon cable for connectivity and operates at a voltage rating of 24 volts DC or between 85 and 264 volts AC.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2711-NL7X

ManufacturerAllen Bradley
Product TypeReplacement Backlight
Product LinePanelview 1000
Part Number2711-NL7X
Weight0.06 lbs (0.03 kg)
CompatibilityPanelview 1000 Operator Interface Series C
Connector TypeFlat ribbon cable
Rated Voltage24 Volts DC and 85 to 264 Volts AC
Ambient Operating Temperature0 to 55°C (non-condensing environment)
Storage Temperature-20 to 85°C (non-condensing environment)
Typical Brightness300 candela per square meter
Backlight Life SpanApproximately 50,000 hours at 40°C
Backlight TypeSolid-state white light-emitting diode (LED)
Shock Resistance30 G (operating) and 50 G (non-operating) at 11 milliseconds
Enclosure RatingNEMA Type 12, 13, and 4X
Mounting MethodRetaining clip
Screw Type10 bezel screws
InstallationIt is advisable to wear an ESD wristband when installing this backlight to prevent damage to the electronic components.
Request a Repair

The 2711-NL7X replacement backlight is designed specifically for Allen Bradley's Panelview 1000 series C operator interface. Weighing merely 0.04 pounds (0.02 kilograms), it’s crafted to fit seamlessly within the existing hardware of the interface. Connectivity is provided via a flat ribbon cable.

This backlight is compatible with a voltage input of 24 volts DC as well as 85 to 264 volts AC, offering flexibility in different operating conditions. In terms of environmental suitability, it operates effectively in ambient temperatures ranging from 0 to 55°C without condensation. When stored, it can handle a broader temperature range from -20°C up to 85°C under similar conditions.

Brightness is rated at 300 candela per square meter, ensuring visibility for end-users. Its sustainable life expectancy is approximately 50,000 hours at a consistent temperature of 40°C. Utilizing solid-state white LEDs, it ensures enhanced longevity for the usage of the panel interface. With a robust design that enables shock resistance of 30 G during operation—and even more, at 50 G when not operational—this backlight is engineered to withstand industrial conditions while meeting NEMA Type 12, 13, and 4X standards.

For fitting the backlight into the panel, installation involves a retaining clip accompanied by 10 bezel screws to secure it. The recommended precaution during installation includes wearing an ESD wristband to protect the internal components from static electricity.