2711-T10C10

The Allen-Bradley 2711-T10C10 terminal is a touchscreen human-machine interface terminal in the PanelView standard 1000 human-machine interface terminal series. This interface comes with a 10-inch color display that helps the operators have a better visualization of application processes due to its resolution of 640 by 480 pixels. The screen is a color active-matrix type of screen. The Allen-Bradley 2711-T10C10 human-machine interface terminal can operate without any inconvenience in environments that have a relative humidity range of 5 to 95%, without condensation, that have a maximum temperature rating of 50 degrees Celsius, and that have a maximum altitude of 2000 meters. It has been designed to operate in indoor environments only because the screen must be protected especially from ultraviolet rays that come from direct sunlight. This interface needs to be installed while following each step in the manual and after removing power from all the connected equipment. The Allen-Bradley 2711-T10C10 human-machine interface terminal has a display area of 211 by 158 millimeters and an overall width of 370 millimeters, a height of 282 millimeters, and a length of 112 millimeters. It also has a weight of 7 pounds. The communication mechanism provided by this interface terminal is a DeviceNet port with its own printer port. It also has a general memory of 1008 Kilobytes and a flash memory of 310 Kilobytes.

The Allen-Bradley 2711-T10C10 is a Human Machine Interface (HMI) device or sometimes referred to as a Human Machine Interface (MMI). This device is part of Allen-Bradley’s PanelView Standard 1000 operator terminal that features a 10-inch, color active matrix TFT screen, a DeviceNet communication interface, and touchscreen operator input.

The 2711-T10C10 is typically a flush mounted device, installed to an enclosure that offers a protection rating equivalent to NEMA Type 12, 13, 4X (indoor use only), IEC IP54, and IP65 standards. This enclosure must be provided with a panel cut-out that meets the required opening to properly mount the HMI device. Additionally, the enclosure must have a flat and smooth surface with vibration and shock limited up to 29 up to 2000 Hertz and 15 g, respectively.

The 2711-T10C10 also supports direct communication to an alarm printer via the embedded RS-232 printer port. This printer port may be configured to print alarm and events records at a specific and defined interval for the purpose of archiving and reporting. The RS-232 printer port has selectable baud rate configurations of 1200, 2400, 9600, and 19,200 Kbps.

This operator terminal also comes with a 1008 KB of non-volatile memory and 310 KB of Random Access Memory (RAM). Optional ATA memory cards may be installed to the 2711-T10C10 to compliment the embedded non-volatile memory.

To operate this operator terminal, an external supply voltage range of 85-264 Volts AC must be wired to the power inputs of this device along a frequency range of 47-63 Hertz. It has a power consumption of 55 Volt-amperes.