2711-T10C15

The Allen-Bradley 2711-T10C15 is a Human Machine Interface (HMI) product that is part of the PanelView standard operator terminals. This HMI device is used in many industrial applications, whether factory or process automation requirements. This device enables centralized monitoring and control through the embedded display and operator interface and actively communicates with partner automation devices via the built-in communication interfaces.

Specifically, the 2711-T10C15 is a PanelView 1000 Color terminal with touchscreen interface. The display screen is an Active Matrix Thin-Film Resistor (TFT) with Cold Cathode Fluorescent (CCF) Backlight with resolution of 640 x 480 pixels and screen size of 211 x 158 mm (8.3 x 6.2 in.). This screen comes with embedded touch sensitive cells that enables the touchscreen interface of this HMI device. The touch cells individually measures 26 x 30 pixels with a total of 384 touch cells distributed in 384 (24 columns x 16 rows). For exchanging data with partner automation devices such as Programmable Logic Controllers (PLCs), the 2711-T10C15 comes with embedded ControlNet communication port that supports the ControlNet industrial protocol. It also comes with a dedicated RS232 printer port which may be configured to interface with alarm and events printers.

This HMI device operates when supplied with an 85-264V AC, with frequency range of 47-63 Hz. It has a power maximum consumption of 55VA. This HMI device is flush mounted to an enclosure with protection rating NEMA Type 12/13, 4X (Indoor use only) IP54, IP65. It comes with status indicators such as Green for COMM and Red for FAULT indications.

The Allen-Bradley 2711-T10C15 terminal is available with an Active Matrix TFT LCD with a 10-inch touchscreen display with a resolution of 640 x 480 pixels. The device is equipped with multiple communication ports. The RS-232 printer port is used to print generated messages, alarm lists, and triggered situations. The baud rate of the RS-232 port is 2400, 1200, 9600, and 19,200 kbps. Plus, the ControlNet option of the device allows for communication with other Allen-Bradley devices such as a PLC-5 or ControlLogix controller. The ControlNet terminal is used to communicate with multiple or single controllers for communication. Furthermore, the product dimensions are approximately 282 x 370 x 112 millimeters or 11.11 x 14.58 x 4.40 inches and it has a weight of almost 7.9 Pounds or 3.6 kilograms. The cut-out dimensions are measured at 11.11 inches in height and 14.58 inches in width. Moreover, the 2711-T10C15 terminal also features 1008 KB of non-volatile memory and 310 KB of RAM.

The input power of the 2711-T10C15 terminal ranges from 85 to 264 Volts AC and the enclosure ratings are 47 to 63 Hertz 4X and 12/13 NEMA IP54/IP65 (indoor only) respectively. The operating temperature is rated from 32 to 131 degrees Fahrenheit. The heat dispersion grades are mentioned at 132 BTU per hour and 39 Watts. On the other hand, the storage temperature range of the device should be between -13 and 158 degrees Fahrenheit. The relative humidity range of the 2711-T10C15 terminal is from 5 to 95%, non-condensing. The 2711-T10C15 terminal has 2 G of operating vibration at up to 2000 Hertz. The shock rating in the non-operating and operating states are 15 G and 30 G peak, respectively.