2711-T10G1

The Allen-Bradley 2711-T10G1 is a PanelView 1000 Grayscale terminal. This operator terminal is used to integrate data from one or more Programmable Logic Controllers (PLC) and represents the collected data in custom designed graphical and control points of the connected machine or process. It is a rugged terminal especially build for a variety of industries and capable of being used in general purpose and specific automation requirements.

The 2711-T10G1 features a 10.1-inch grayscale Active Matrix Thin-Film Resistor (TFT) with Cold Cathode Fluorescent (CCF) Backlight (4 shades of gray) graphics, with resolution of 640 x 480 pixels and viewing area of 211 x 158 mm (8.3 x 6.2 in.). It has an embedded analog-resistive touchscreen input interface with individual touch cell size of 26 x 30 pixels with a total of 211 x 158 mm (8.3 x 6.2 in.) touch cells.

The 2711-T10G1 is powered externally by an AC supply voltage range of 85-264VAC with frequency of 43-63 Hz. It comes with a total application memory of 1008 Kbytes memory with hardware status indicators such as Green LED to indicate normal communication status and Red LED for hardware Fault recognition. It weighs 3.00 kg (6.6 lb) and overall dimensions of 11.11 (H) x 16.64 (W) x 4.40 (D) inches. When installing this operator terminal, the required enclosure depth is 97 mm (3.81 in.). If installed with an accessory such as memory card retainer, the required installation depth is 129 mm (5.06 in.) with memory card retainer. If planning to install a memory card in addition to the memory card retainer, required installation depth is 220 mm (8.65 in.).