The 2711-T10G10 Panelview by Allen Bradley is a Series 1000 Panelview. The 2711-T10G10 Panelview is equipped with a battery-powered clock that will stamp important inputs with the current time and date, and whose batteries can be replaced in the field. The input method for this unit is a touchscreen-only input, meaning that it does not contain a keypad. The one-million press actuation of the screen and its grayscale, 10-inch display provide a sharp input method for information and commands.is module’s real-time clock is backed by batteries which can be replaced in the field. The 2711-T10G10 module has a variety of memory options, both internally and externally. In addition to its application runtime memory of 310 KB and its nonvolatile memory of 1008 KB, the 2711-T10G10 has a slot for an external ATA flash memory option.
The 2711-T10G10 is also equipped with a sturdy and commonly used software, which is the PanelBuilder 32 software. This versatile, smoothly running software can also be operated on a user’s personal computer. The 2711-T10G10 runs on only AC power; between 85 and 264 Volts of energy are required to power this module, at a frequency of 47 to 63 Hertz. This module weighs in at around 3.2 kilograms, with measurements of around 282 x 370 x 112 millimeters. Its maximum altitude is around 2000 meters; mounting the module any higher than this may cause it to begin deteriorating at a fast than normal rate. Its operational temperature zone is 0 to 55 degrees Celsius and it should be stored in a temperature zone of -25 to 70 degrees Celsius. The 2711-T10G10 is rated for several enclosure types, including NEMA Type 12, 13, 4X or IEC IP54/IP65 enclosures.
FAQ for 2711-T10G10
Question: Is the 2711-T10G10 a touchscreen module or a keypad module?
Answer: The 2711-T10G10 is a touchscreen input module.
Question: What kind of enclosures should be used with the 2711-T10G10 Panelview?
Answer: The 2711-T10G10 is rated for a number of different enclosures; among these are the IEC IP54/IP65 enclosures, as well as NEMA Types 12, 13, and 4X for specifically indoor operations.
Question: What kind of software can be run on the 2711-T10G10 Panelview?
Answer: The 2711-T10G10 runs the common PanelBuilder32 software, which can also be run on a personal computer.
Question: What kind of memory does the 2711-T10G10 module have?
Answer: The 2711-T10G10 is equipped with an application runtime memory of 310 KB and a nonvolatile memory of 1008 KB, in addition to its ATA flash memory card support.
Question: Does the 2711-T10G10 have any communication ports?
Answer: Yes, the 2711-T10G10 has a DeviceNet communication port.
Question: What type of warranty is available for the 2711-T10G10 Panelview?
Answer: The 2711-T10G10 comes with a 12 month DO Supply warranty when purchased.
Question: Does DO Supply offer any repair services?
Answer: Yes, DO Supply offers several different repair options. For more information, use the contact methods specified above to contact us.
Repair Services for 2711-T10G10
||$1414||Add to Cart |
Our highly skilled technicians can repair your 2711-T10G10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Revisions for 2711-T10G10
Please refer to the manual for more information about the 2711-T10G10 such as the wiring diagrams, data sheets,
firmware information and migration or obsolescence details.
|Revision Part #
||Also Known as
||2711-T10G10/A, Series A, Rev A
||2711-T10G10/B, Series B, Rev B
||2711-T10G10/C, Series C, Rev C
||2711-T10G10/D, Series D, Rev D
||2711-T10G10/E, Series E, Rev E
||2711-T10G10/F, Series F, Rev F
||2711-T10G10/X, Series X, Rev X
The 2711-T10G10 has several firmware revisions: 2711-T10G10-FRN 3.01, 2711-T10G10-FRN 3.13, 2711-T10G10-FRN 3.14, 2711-T10G10-FRN 3.30, 2711-T10G10-FRN 3.40, 2711-T10G10-FRN 4.00, 2711-T10G10-FRN 4.10, 2711-T10G10-FRN 4.20, 2711-T10G10-FRN 4.41, 2711-T10G10-FRN 4.43, 2711-T10G10-FRN 4.46, and 2711-T10G10-FRN 4.48