The 2711-T10G20 interface terminal is an Allen-Bradley/Rockwell Automation Panelview 1000 series interface terminal. It is controlled by a touchscreen. The touchscreen on the 2711-T10G20 interface terminal is 10 inches wide with grayscale graphics. This terminal operates with 85 to 264 Volts AC voltage. The 2711-T10G20 interface terminal has an Ethernet communication port.
We sell industrial automation parts backed by our 2-year DO Supply Warranty.
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
Repairs and exchanges are available for all automation products.
Drop shipping, blind shipping, and account shipping with no extra fees.
Input Type | Touch |
---|---|
Brand | Allen-Bradley |
Manufacturer: | Rockwell Automation |
Product Family: | PanelView Standard Terminals |
Product Type: | PanelView 1000 Standard Operator Terminals |
Display Type: | Active Matrix Thin-Film Resistor (TFT) with Cold Cathode Fluorescent (CCF) Backlight (4 shades of gray) |
Display Area: | 211 x 158 mm (8.3 x 6.2 in.) |
Resolution: | 640 x 480 pixels |
Backlight: | 100,000 hr LED backlight life |
Touchscreen: | 384 (24 columns x 16 rows) |
Touch Cell size: | 26 x 30 pixels |
Application memory: | 1008K bytes (application screens) |
Communication ports: | Ethernet; RS232 (printer) |
Input Voltage range: | 85…264V AC, 47…63 Hz |
Operating Temperature: | 0…55 ° C (32…131 ° F) |
Heat Dissipation: | 39 W (132 BTU/HR) |
Part Number/Catalog No. | 2711-T10G20 |
Product Line | Panelview 1000 |
Display Size | 10.1 in. |
Display Color | Grayscale |
Communication | Ethernet and Printer (RS-232) Port |
Input Power | 85-264 Volts Alternating Current |
Memory | 256 Kilobytes |
Enclosure Type | NEMA Type 12/13 or 4X |
UPC | 10611320575276 |
Product Lifecycle Status* | Discontinued/Obsolete |
* The Allen Bradley 2711-T10G20 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T10G20 units instead of migration.
The Allen-Bradley 2711-T10G20 is a PanelView Standard 1000 touchscreen terminal. It is a grayscale terminal that has an EtherNet/IP communication port and an RS-232 printer port. The 2711-T10G20 is AC-powered and has a non-volatile memory of 1008 KB and a RAM of 310 KB. It has a display size of 10.1 inches and is enclosed in a NEMA Type 12/13 or 4x enclosure. This terminal has an input voltage range of 85 to 264 Volts AC and 47 to 63 Hertz. It also has a 256 KB memory for storing files, applications, and other data.
The 2711-T10G20 has an electronic circuitry that is powered by an external power supply voltage of 85-264VAC with frequency of 43-63 Hz. It has a power consumption of 55 VA, maximum and rated Heat dissipation of 39 W (132 BTU/HR). Install this operator terminal to an enclosure rated NEMA Type 12/13, 4X (Indoor use only) IP54, IP65. Appropriate heating and cooling devices may be used to maintain the required operating temperature of 0…55 ° C (32…131 ° F). Similarly, install shock and vibration limiting components and devices to limit shock and vibration within 15 g and 2 g up to 2,000 Hz respectively.
It comes with embedded library of standard symbols, used to design an accurate and detailed process mimic as well as custom drawing palette for designing custom graphics. This operator terminal is equipped with an Ethernet communication interface, allowing connection to an ethernet network and exchange data with Ethernet enabled Allen-Bradley PLCs as well as 3rd party controllers and devices such as gateways, protocol bridge and converters.
Revision Part # | Also known as | |
---|---|---|
2711-T10G20 Ser A | 2711-T10G20/A, Series A, Rev A | Request a quote |
2711-T10G20 Ser B | 2711-T10G20/B, Series B, Rev B | Request a quote |
2711-T10G20 Ser C | 2711-T10G20/C, Series C, Rev C | Request a quote |
2711-T10G20 Ser D | 2711-T10G20/D, Series D, Rev D | Request a quote |
2711-T10G20 Ser E | 2711-T10G20/E, Series E, Rev E | Request a quote |
2711-T10G20 Ser F | 2711-T10G20/F, Series F, Rev F | Request a quote |
2711-T10G20X | 2711-T10G20/X, Series X, Rev X | Request a quote |
Don't see your particular revision? Contact us now. |
No. Due to the grayscale display, it can only implement black and white colored process mimic.
No. The operating temperature of both colored and grayscale terminals are same, with 0…55 ° C (32…131 ° F).
The 2711-T10G20 heat dissipation is 39 W.
The Allen-Bradley 2711-T10G20 is a PanelView 1000 Standard Operator Terminal. This operator terminal is powered by an external 85-264VAC supply voltage and has a 10.1-inch grayscale display with embedded Ethernet communication and RS232 port for printer interface. It has an analog resistive touchscreen operator interface.
The 2711-T10G20 is a PanelView 1000 operator terminal that features an Ethernet capability. With Ethernet capability, this operator terminal offers a more user-friendly communication capability as Ethernet may be utilized and connect to network with use of non-OEM components unlike the 2711-T10G1 with a Remote I/O interface. Ethernet is also popular and easy to maintain by most personnel. This operator terminal however, only has a grayscale graphics.
Size | 10 inch |
---|---|
Input Type | Touch |
Panel Cutout Height | 257 mm (10.11 in) |
Panel Cutout Width | 338 mm (13.29 in) |
Terminal Height | 282 mm (11.11 in) |
Terminal Width | 370 mm (14.58 in) |
Terminal Overall Depth | 112 mm (4.4 in) |
Terminal Mounted Depth | 90 mm (3.54 in) |
Size | 10 inch |
---|---|
Input Type | Touch |
Display Type | Color active matrix TFT |
Display Size (Diagonal) | 10 in. |
Viewing Area | 211 x 158 mm (8.3 x 6.2 in.) |
Display Resolution | 640 x 480 |