2711-T14C15

Available Now
Request a Quote for 2711-T14C15
The 2711-T14C15 operator terminal is a Panelview 1400 series operator terminal that has been manufactured by Allen-Bradley/Rockwell Automation. It comes with a touchscreen for control that is 14 inches wide. The 2711-T14C15 operator terminal's 14-inch touchscreen can support full color graphics. This terminal communicates with other devices through the DeviceNet network because it has a DeviceNet communication port. The 2711-T14C15 operator terminal also has an RS-232 printer port that allows it to connect to a printer or other peripheral devices.
Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711-T14C15.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:

Rated 4.9 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711-T14C15

Description: The 2711-T14C15 operator terminal is a Panelview 1400 series operator terminal that has been manufactured by Allen-Bradley/Rockwell Automation. It comes with a touchscreen for control that is 14 inches wide. The 2711-T14C15 operator terminal's 14-inch touchscreen can support full color graphics. This terminal communicates with other devices through the DeviceNet network because it has a DeviceNet communication port. The 2711-T14C15 operator terminal also has an RS-232 printer port that allows it to connect to a printer or other peripheral devices.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711-T14C15.
Exchange: Exchange credit for your defective unit available.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 13 reviews

Technical Specifications for 2711-T14C15

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711-T14C15
Power TypeAC
Supply Voltage Limit85-264 Volts; 43-63 Hertz
Power Consumption200 VA max
Comm PortControlNet
Total Application Flash Memory1008 Kbytes
Operating Shock15 g
Non-Operating Shock30 g
Operating Temperature32-131 F (0-55 C)
Dimensions13.97 x 17.37 x 15.53 in (355 x 441 x 394 mm)
Display Dimensions10.0 x 7.5 in (255 x 191 mm)
Weight43.2 lbs (19.6 kg)
Method of InputTouchscreen
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-T14C15 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T14C15 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711-T14C15
Power TypeAC
Supply Voltage Limit85-264 Volts; 43-63 Hertz
Power Consumption200 VA max
Comm PortControlNet
Total Application Flash Memory1008 Kbytes
Operating Shock15 g
Non-Operating Shock30 g
Operating Temperature32-131 F (0-55 C)
Dimensions13.97 x 17.37 x 15.53 in (355 x 441 x 394 mm)
Display Dimensions10.0 x 7.5 in (255 x 191 mm)
Weight43.2 lbs (19.6 kg)
Method of InputTouchscreen
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-T14C15 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T14C15 units instead of migration.


About 2711-T14C15

The Allen-Bradley 2711-T14C15 is a PanelView standard 1400 terminal. It features a color CRT touchscreen display that measures 14 inches. The terminal’s screen is made up of 384 touch cells arranged in 24 columns by 16 rows. Each touch cell is 33 x 37 pixels in size and the screen has an 800 x 600-pixel resolution. Note that the 2711-T14C15 terminal does not have any keypad input. This Series B terminal has two communication ports available: one ControlNet communication port and one RS-232 printer port. It also comes with an IP54/IP65 protection and is housed in a NEMA Type 12/13 or 4x enclosure that can only be used indoors. The built-in indicators allow users to monitor the status of the terminal. A 1008-KB flash memory is also included in the terminal.

It has a maximum power consumption of 200 VA and with supply voltage limits of 85 to 264  Volts AC and 43 to 63 Hertz. The entire terminal weighs 43.2 pounds and has a total measurement of 13.97 x 17.37 x 15.53 inches. Its operating temperature range is from 0 to 55 degrees Celsius and storage temperature range is from -40 to 85 degrees Celsius. The terminal has a heat dissipation of 78 W or 264 BTU/hour, with a non-condensing relative humidity of 5 to 95% at 0 to 55 degrees Celsius. It also has a non-operating shock of 30g, an operating shock of 15g, and an operating vibration of 1g at up to 2000 Hertz.

Technical Description of 2711-T14C15

ControlNet Communication and RS-232 Printer Port

Repair Services for 2711-T14C15

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711-T14C15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2711-T14C15

Please refer to the manual for more information about the 2711-T14C15 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711-T14C15/A, Series A, Rev A Request Quote
2711-T14C15/B, Series B, Rev B Request Quote
2711-T14C15X
2711-T14C15/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1-T14C15
  • 271l-T14C15
  • 2711-Tl4C15
  • 2711-T1AC15
  • 2711-T14Cl5
  • 2711T14C15

Dimensions For 2711-T14C15

Size 14 inch
Input Type Touch
Panel Cutout Height 305 mm (12.0 in)
Panel Cutout Width 391 mm (15.40 in)
Terminal Height 355 mm (13.97 in)
Terminal Width 441 mm (17.37 in)
Terminal Overall Depth 394 mm (15.53 in)
Terminal Mounted Depth 370 mm (14.58 in)

Dimensions For 2711-T14C15

Resolutions For 2711-T14C15

Size 14 inch
Input Type Touch
Display Resolution 800 x 600
About

Technical Specifications for 2711-T14C15

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711-T14C15
Power TypeAC
Supply Voltage Limit85-264 Volts; 43-63 Hertz
Power Consumption200 VA max
Comm PortControlNet
Total Application Flash Memory1008 Kbytes
Operating Shock15 g
Non-Operating Shock30 g
Operating Temperature32-131 F (0-55 C)
Dimensions13.97 x 17.37 x 15.53 in (355 x 441 x 394 mm)
Display Dimensions10.0 x 7.5 in (255 x 191 mm)
Weight43.2 lbs (19.6 kg)
Method of InputTouchscreen
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711-T14C15
Power TypeAC
Supply Voltage Limit85-264 Volts; 43-63 Hertz
Power Consumption200 VA max
Comm PortControlNet
Total Application Flash Memory1008 Kbytes
Operating Shock15 g
Non-Operating Shock30 g
Operating Temperature32-131 F (0-55 C)
Dimensions13.97 x 17.37 x 15.53 in (355 x 441 x 394 mm)
Display Dimensions10.0 x 7.5 in (255 x 191 mm)
Weight43.2 lbs (19.6 kg)
Method of InputTouchscreen
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-T14C15 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T14C15 units instead of migration.

About 2711-T14C15

The Allen-Bradley 2711-T14C15 is a PanelView standard 1400 terminal. It features a color CRT touchscreen display that measures 14 inches. The terminal’s screen is made up of 384 touch cells arranged in 24 columns by 16 rows. Each touch cell is 33 x 37 pixels in size and the screen has an 800 x 600-pixel resolution. Note that the 2711-T14C15 terminal does not have any keypad input. This Series B terminal has two communication ports available: one ControlNet communication port and one RS-232 printer port. It also comes with an IP54/IP65 protection and is housed in a NEMA Type 12/13 or 4x enclosure that can only be used indoors. The built-in indicators allow users to monitor the status of the terminal. A 1008-KB flash memory is also included in the terminal.

It has a maximum power consumption of 200 VA and with supply voltage limits of 85 to 264  Volts AC and 43 to 63 Hertz. The entire terminal weighs 43.2 pounds and has a total measurement of 13.97 x 17.37 x 15.53 inches. Its operating temperature range is from 0 to 55 degrees Celsius and storage temperature range is from -40 to 85 degrees Celsius. The terminal has a heat dissipation of 78 W or 264 BTU/hour, with a non-condensing relative humidity of 5 to 95% at 0 to 55 degrees Celsius. It also has a non-operating shock of 30g, an operating shock of 15g, and an operating vibration of 1g at up to 2000 Hertz.

Technical Description of 2711-T14C15

ControlNet Communication and RS-232 Printer Port
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711-T14C15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711-T14C15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2711-T14C15 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711-T14C15/A, Series A, Rev A Request Quote
2711-T14C15/B, Series B, Rev B Request Quote
2711-T14C15X
2711-T14C15/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1-T14C15
  • 271l-T14C15
  • 2711-Tl4C15
  • 2711-T1AC15
  • 2711-T14Cl5
  • 2711T14C15
PDF
Dimensions

Dimension For 2711-T14C15

Size 14 inch
Input Type Touch
Panel Cutout Height 305 mm (12.0 in)
Panel Cutout Width 391 mm (15.40 in)
Terminal Height 355 mm (13.97 in)
Terminal Width 441 mm (17.37 in)
Terminal Overall Depth 394 mm (15.53 in)
Terminal Mounted Depth 370 mm (14.58 in)
Resolutions

Resolutions For 2711-T14C15

Size 14 inch
Input Type Touch
Display Resolution 800 x 600