2711E-T10C15

The Allen-Bradley 2711E-T10C15 is a PanelView 1000e Enhanced Operator Terminal. The PanelView 1000e Enhanced Operator Terminal is equipped with a 10-inch color touch screen at a 640 x 480 resolution and a clip mount with ControlNet (Release 1.5) support. A ControlNet ISA/EISA Interface card is needed for ControlNet communication. The 1784-KTCs card is installed in the Allen-Bradley 2711E-T10C15. The Terminal features 2.25 megabytes onboard flash memory and Multi-rack RIO or DH+ and ControlNet Scan Classes. The terminal should only be connected to its own branch circuit and protected by a fuse or circuit breaker. The incoming power to the Panel View terminal should be routed by a separate path from the communication cable. DO NOT RUN SIGNAL WIRING AND POWER WIRING IN THE SAME CONDUIT Power and communication lines should cross at right angles. Communication lines can be installed in the same conduit as low level DC I/O lines, less than 10 volts. To transfer application files to and from a PanelView terminal, a memory card is needed. The Allen Bradley 2711E-T10C15 terminals operate if temperature does not exceed 135 degrees celsius. The terminal should be mounted in an enclosed area to protect the internal circuitry. To ensure adequate ventilation, make sure there is enough space in the enclosure, being mindful of heat provided by other devices in the enclosure. The temperature around the terminals must be between 0 to 55 degrees celsius. The remote I/O port can be used to communicate with the remote I/O scanner port on a PLC controller, transfer PaneView applications between a computer and the terminal. Please note the the use of abrasive cleansers or solvents are not recommended to clean terminal, do not scrub or use brushes. The dimensions of the Allen-Bradley 2711E-T10C15 are 11.11 x 14.58 inches.

The Allen-Bradley 2711E-T10C15 is a PanelView 1000e. This product of Allen-Bradley is a Human Machine Interface (HMI) or Man Machine Interface (MMI). It provides a means of monitoring and controlling designated processes in real-time through the visualization screen, input interface, and communication ports.

The 2711E-T10C15 communicates with Programmable Logic Controllers (PLCs) through the built-in ControlNet communication interface. This allows this PanelView 1400e operator terminal to centralize data and information within the controllers.

The 2711E-T10C15 displays the custom designed HMI application through its 10.4-inch colored display screen. It has a display resolution of 640 horizontal by 480 vertical pixels and viewing area of 211.2 x 158.4 millimeters image size. Screen saver timeout may also be configured to automatically shut-off the display when not in use. The backlight installed to this operator terminal is field-replaceable with an expected operational life of 10,000 hours if set for maximum brightness. Screen saver timeout effectively lengthens the operational life of backlight.

For operator input, the 2711E-T10C15 has a touchscreen input interface. The touch input is made of clear, hard-coated and scratch resistant polyester material with a chemically strengthened glass overlay while the touch membrane’s bezel is made of reinforced plastic. The touch input interface is recommended to be operated at an actuation force of 2.5-3.5 ounces or 71 to 100 grams.