2711E-T10C7 - In Stock | Allen Bradley Panelview 2711E

2711E-T10C7

Rated 5 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711E-T10C7

Description: The 2711E-T10C7 terminal is an operator interface terminal that is available from the Allen-Bradley/Rockwell Automation Panelview 2711E series. It is a touchscreen type of terminal. The 2711E-T10C7 operator interface terminal can support the ControlNet network with an Allen-Bradley 1784-KTCx ControlNet card. This operator terminal also supports color graphics. The 2711E-T10C7 operator interface terminal?s touchscreen membrane is made of clear and scratch-resistant polyester.
In Stock Ships Today
Request a quote for 2711E-T10C7

Description: The 2711E-T10C7 terminal is an operator interface terminal that is available from the Allen-Bradley/Rockwell Automation Panelview 2711E series. It is a touchscreen type of terminal. The 2711E-T10C7 operator interface terminal can support the ControlNet network with an Allen-Bradley 1784-KTCx ControlNet card. This operator terminal also supports color graphics. The 2711E-T10C7 operator interface terminal?s touchscreen membrane is made of clear and scratch-resistant polyester.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711E-T10C7.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 10 reviews

    Technical Specifications for 2711E-T10C7

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711E-T10C7
Product LinePanelview 2711E
Display Size10.4-inch
Display ColorColor
Input TypeTouchscreen
CommunicationControlNet
Memory2.25MB On-Board Flash
Input Voltage180-264V AC
Backlight6189-NL2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711E-T10C7 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711E-T10C7 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711E-T10C7
Product LinePanelview 2711E
Display Size10.4-inch
Display ColorColor
Input TypeTouchscreen
CommunicationControlNet
Memory2.25MB On-Board Flash
Input Voltage180-264V AC
Backlight6189-NL2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711E-T10C7 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711E-T10C7 units instead of migration.

s

About 2711E-T10C7

The Allen-Bradley 2711E-T10C7 is a PanelView 1000e clip mount touch screen terminal that has ControlNet support. It comes with a 10.4-inch color CRT display with a resolution of 640 x 480 pixels. This screen features a screen saver function, an adjustable and replaceable backlight, and it is an analog resistive type that has a clear, hard-coated, scratch-resistant polyester membrane over chemically-strengthened glass. You can define as few as 40 x 40 pixels in up to an area of 192 touch cells. The screen has an actuation rating of 1,000,000 presses and an actuation force of 2.5 to 3.5 oz or 71-100 grams. Its bezel is made of reinforced plastic and the entire terminal weighs roughly 11.3 lbs or 5.1 kg. 

This terminal has an input voltage requirement of 90-132V AC or 180-264V AC via the auto-select switching power supply and a frequency range of 47-63 Hz. The 2711E-T10C7 has a typical power consumption of 60 VA and 45 W and a maximum power consumption of 90 VA or 70 W. A permanent lithium battery is installed with this terminal and it has a lifespan of more than 10 years. This terminal also comes with a battery-backed clock that will display AM/PM or 24-hour time with the day of the week and leap year corrected date. Note that this terminal's clock has an accuracy of +/- 7 minutes per month. Its form-c contact alarm relay is a maximum of 24V AC and DC, 1 amp continuous. A 2.25 MB flash memory is available with this terminal and you can also install an optional PC memory card of up to 16 MB. 

The operating temperature of the 2711E-T10C7 terminal ranges from 0-50 ËšC and its non-operating temperature is from -25-60 ËšC. It has a typical heat generation of 154 BTU/hr and a maximum of 290 BTU/hr. Maximum operating altitude is 6500 feet and the maximum non-operating altitude is 40,000 feet. The 2711E-T10C7 also has an operating shock of 15 g peak acceleration and an operating vibration of 2 g peak acceleration at 58-150 Hz.



Technical Description of 2711E-T10C7

1000e Touch Screen terminal

Repair Services for 2711E-T10C7

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711E-T10C7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2711E-T10C7

Please refer to the manual for more information about the 2711E-T10C7 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711E-T10C7/A, Series A, Rev A Request Quote
2711E-T10C7X
2711E-T10C7/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1E-T10C7
  • 271lE-T10C7
  • 2711E-Tl0C7
  • 2711E-T1oC7
  • 2711ET10C7

Dimensions For 2711E-T10C7

Size 10 inch
Input Type Touch
Panel Cutout Height 282 mm (11.11 in)
Panel Cutout Width 370 mm (14.58 in)
Terminal Height 282 mm (11.11 in)
Terminal Width 370 mm (14.58 in)
Terminal Overall Depth 174 mm (6.83 in)
Terminal Mounted Depth 157 mm (6.18 in)

Dimensions For 2711E-T10C7

Resolutions For 2711E-T10C7

Size 10 inch
Input Type Touch
Display Type Color display
Display Resolution 640 x 480
About

Technical Specifications for 2711E-T10C7

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711E-T10C7
Product LinePanelview 2711E
Display Size10.4-inch
Display ColorColor
Input TypeTouchscreen
CommunicationControlNet
Memory2.25MB On-Board Flash
Input Voltage180-264V AC
Backlight6189-NL2
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711E-T10C7
Product LinePanelview 2711E
Display Size10.4-inch
Display ColorColor
Input TypeTouchscreen
CommunicationControlNet
Memory2.25MB On-Board Flash
Input Voltage180-264V AC
Backlight6189-NL2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711E-T10C7 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711E-T10C7 units instead of migration.

About 2711E-T10C7

The Allen-Bradley 2711E-T10C7 is a PanelView 1000e clip mount touch screen terminal that has ControlNet support. It comes with a 10.4-inch color CRT display with a resolution of 640 x 480 pixels. This screen features a screen saver function, an adjustable and replaceable backlight, and it is an analog resistive type that has a clear, hard-coated, scratch-resistant polyester membrane over chemically-strengthened glass. You can define as few as 40 x 40 pixels in up to an area of 192 touch cells. The screen has an actuation rating of 1,000,000 presses and an actuation force of 2.5 to 3.5 oz or 71-100 grams. Its bezel is made of reinforced plastic and the entire terminal weighs roughly 11.3 lbs or 5.1 kg. 

This terminal has an input voltage requirement of 90-132V AC or 180-264V AC via the auto-select switching power supply and a frequency range of 47-63 Hz. The 2711E-T10C7 has a typical power consumption of 60 VA and 45 W and a maximum power consumption of 90 VA or 70 W. A permanent lithium battery is installed with this terminal and it has a lifespan of more than 10 years. This terminal also comes with a battery-backed clock that will display AM/PM or 24-hour time with the day of the week and leap year corrected date. Note that this terminal's clock has an accuracy of +/- 7 minutes per month. Its form-c contact alarm relay is a maximum of 24V AC and DC, 1 amp continuous. A 2.25 MB flash memory is available with this terminal and you can also install an optional PC memory card of up to 16 MB. 

The operating temperature of the 2711E-T10C7 terminal ranges from 0-50 ËšC and its non-operating temperature is from -25-60 ËšC. It has a typical heat generation of 154 BTU/hr and a maximum of 290 BTU/hr. Maximum operating altitude is 6500 feet and the maximum non-operating altitude is 40,000 feet. The 2711E-T10C7 also has an operating shock of 15 g peak acceleration and an operating vibration of 2 g peak acceleration at 58-150 Hz.



Technical Description of 2711E-T10C7

1000e Touch Screen terminal
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711E-T10C7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711E-T10C7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2711E-T10C7 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711E-T10C7/A, Series A, Rev A Request Quote
2711E-T10C7X
2711E-T10C7/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1E-T10C7
  • 271lE-T10C7
  • 2711E-Tl0C7
  • 2711E-T1oC7
  • 2711ET10C7
PDF
Dimensions

Dimension For 2711E-T10C7

Size 10 inch
Input Type Touch
Panel Cutout Height 282 mm (11.11 in)
Panel Cutout Width 370 mm (14.58 in)
Terminal Height 282 mm (11.11 in)
Terminal Width 370 mm (14.58 in)
Terminal Overall Depth 174 mm (6.83 in)
Terminal Mounted Depth 157 mm (6.18 in)
Resolutions

Resolutions For 2711E-T10C7

Size 10 inch
Input Type Touch
Display Type Color display
Display Resolution 640 x 480