2711E-T12C4 | Allen Bradley Panelview 2711E

2711E-T12C4

Rated 4.9 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711E-T12C4

Description: The Allen-Bradley 2711E-T12C4 interface terminal is an operator interface terminal from the Allen-Bradley/Rockwell Automation Panelview 2711E series of operator terminals. Its input option is a touchscreen. The 2711E-T12C4 operator interface terminal is designed to be stud-mounted inside a NEMA 4X rated enclosure. Note that the NEMA 4X enclosure is only suitable for indoor use. The 2711E-T12C4 operator interface terminal can support color graphics on its 12-inch screen.
Available Now
Request a quote for 2711E-T12C4

Description: The Allen-Bradley 2711E-T12C4 interface terminal is an operator interface terminal from the Allen-Bradley/Rockwell Automation Panelview 2711E series of operator terminals. Its input option is a touchscreen. The 2711E-T12C4 operator interface terminal is designed to be stud-mounted inside a NEMA 4X rated enclosure. Note that the NEMA 4X enclosure is only suitable for indoor use. The 2711E-T12C4 operator interface terminal can support color graphics on its 12-inch screen.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711E-T12C4.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 18 reviews

    Technical Specifications for 2711E-T12C4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711E-T12C4
Product LinePanelview 2711E
Display Size12-inch
Display ColorColor
ListingThis content was written and compiled by dosupply.com and should not be copied.
Input TypeTouchscreen
CommunicationDH+
Memory256KB On-Board Flash
Input Voltage180-264V AC
Backlight6189-NL2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711E-T12C4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711E-T12C4 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711E-T12C4
Product LinePanelview 2711E
Display Size12-inch
Display ColorColor
Input TypeTouchscreen
CommunicationDH+
Memory256KB On-Board Flash
Input Voltage180-264V AC
Backlight6189-NL2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711E-T12C4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711E-T12C4 units instead of migration.

s

About 2711E-T12C4

The Allen-Bradley 2711E-T12C4 is a PanelView 1200e stud mount touchscreen terminal. It features a CRT color display with a screen saver function, has a resolution of 640 x 480 pixels, and measures 12 inches. The touchscreen has a water-clear, hard-coated, scratch-resistant polyester over chemically-strengthened glass and is a resistive matrix type. It has an actuation force of 2.5 to 3 oz or 71-100 grams and an actuation rating of around 1,000,000 presses. 120 touch cell areas with 40 x 64 pixels are available with this terminal. The bezel of this terminal is made up of a brushed stainless steel with #4 finish over cast aluminum bezel. 

A battery-backed clock is present with the 2711E-T12C4 terminal and you can set it to display not only the leap year corrected date and day of the week but also the time in AM/PM or 24-hour format. Note that the clock has an accuracy of +/- 7 minutes per month. It also has a form-c contact alarm relay with a maximum of 250V AC, 8 A continuous and 30V DC, 8 A continuous. The installed permanent lithium battery has a more than 10 years lifespan of 30 ËšC. A 256 KB flash memory is also installed but you can add up to 16 MB optional memory using a PC memory card. The terminal weighs 14.8 kg or 32.6 lbs.

The power consumption of the 2711E-T12C4 terminal is typically 160 VA and 65 W and a maximum of 220 VA and 90 W. Its CRT degauss on power-up or midnight is 5.5 A at 115V and 11 A at 240V for 400 ms. Its input voltage requirement is 90-132V AC or 180-264V AC using the auto-select switching power supply and it also has a frequency range of 47-63 Hz. Its operating temperature is 32-122ËšF and storage temperature is from -40-185 ËšF. This terminal’s non-condensing relative humidity is 95% at 30 ËšC and heat generation of typically 222 BTU/hr and a maximum of 307 BTU/hr. The maximum altitude of this terminal is 10,000 feet for operation and 40,000 feet for storage. Its operating shock is 15 g and its operating vibration is 1 g at 58-2000 Hz. 



Technical Description of 2711E-T12C4

1200e Touch Screen terminal

Repair Services for 2711E-T12C4

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711E-T12C4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2711E-T12C4

Please refer to the manual for more information about the 2711E-T12C4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711E-T12C4/A, Series A, Rev A Request Quote
2711E-T12C4X
2711E-T12C4/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1E-T12C4
  • 271lE-T12C4
  • 2711E-Tl2C4
  • 2711E-T12CA
  • 2711ET12C4

Dimensions For 2711E-T12C4

Size 12 inch
Input Type Touch
Panel Cutout Height 322 mm (12.69 in)
Panel Cutout Width 330 mm (13.0 in)
Terminal Height 342 mm (13.50 in)
Terminal Width 351 mm (13.80 in)
Terminal Overall Depth 389 mm (15.31 in)
Terminal Mounted Depth 377 mm (14.83 in)

Dimensions For 2711E-T12C4

Resolutions For 2711E-T12C4

Size 12 inch
Input Type Touch
Display Resolution 800 x 600
About

Technical Specifications for 2711E-T12C4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711E-T12C4
Product LinePanelview 2711E
Display Size12-inch
Display ColorColor
Input TypeTouchscreen
CommunicationDH+
Memory256KB On-Board Flash
Input Voltage180-264V AC
Backlight6189-NL2
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711E-T12C4
Product LinePanelview 2711E
Display Size12-inch
Display ColorColor
Input TypeTouchscreen
CommunicationDH+
Memory256KB On-Board Flash
Input Voltage180-264V AC
Backlight6189-NL2
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711E-T12C4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711E-T12C4 units instead of migration.

About 2711E-T12C4

The Allen-Bradley 2711E-T12C4 is a PanelView 1200e stud mount touchscreen terminal. It features a CRT color display with a screen saver function, has a resolution of 640 x 480 pixels, and measures 12 inches. The touchscreen has a water-clear, hard-coated, scratch-resistant polyester over chemically-strengthened glass and is a resistive matrix type. It has an actuation force of 2.5 to 3 oz or 71-100 grams and an actuation rating of around 1,000,000 presses. 120 touch cell areas with 40 x 64 pixels are available with this terminal. The bezel of this terminal is made up of a brushed stainless steel with #4 finish over cast aluminum bezel. 

A battery-backed clock is present with the 2711E-T12C4 terminal and you can set it to display not only the leap year corrected date and day of the week but also the time in AM/PM or 24-hour format. Note that the clock has an accuracy of +/- 7 minutes per month. It also has a form-c contact alarm relay with a maximum of 250V AC, 8 A continuous and 30V DC, 8 A continuous. The installed permanent lithium battery has a more than 10 years lifespan of 30 ËšC. A 256 KB flash memory is also installed but you can add up to 16 MB optional memory using a PC memory card. The terminal weighs 14.8 kg or 32.6 lbs.

The power consumption of the 2711E-T12C4 terminal is typically 160 VA and 65 W and a maximum of 220 VA and 90 W. Its CRT degauss on power-up or midnight is 5.5 A at 115V and 11 A at 240V for 400 ms. Its input voltage requirement is 90-132V AC or 180-264V AC using the auto-select switching power supply and it also has a frequency range of 47-63 Hz. Its operating temperature is 32-122ËšF and storage temperature is from -40-185 ËšF. This terminal’s non-condensing relative humidity is 95% at 30 ËšC and heat generation of typically 222 BTU/hr and a maximum of 307 BTU/hr. The maximum altitude of this terminal is 10,000 feet for operation and 40,000 feet for storage. Its operating shock is 15 g and its operating vibration is 1 g at 58-2000 Hz. 



Technical Description of 2711E-T12C4

1200e Touch Screen terminal
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711E-T12C4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711E-T12C4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2711E-T12C4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711E-T12C4/A, Series A, Rev A Request Quote
2711E-T12C4X
2711E-T12C4/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1E-T12C4
  • 271lE-T12C4
  • 2711E-Tl2C4
  • 2711E-T12CA
  • 2711ET12C4
PDF
Dimensions

Dimension For 2711E-T12C4

Size 12 inch
Input Type Touch
Panel Cutout Height 322 mm (12.69 in)
Panel Cutout Width 330 mm (13.0 in)
Terminal Height 342 mm (13.50 in)
Terminal Width 351 mm (13.80 in)
Terminal Overall Depth 389 mm (15.31 in)
Terminal Mounted Depth 377 mm (14.83 in)
Resolutions

Resolutions For 2711E-T12C4

Size 12 inch
Input Type Touch
Display Resolution 800 x 600