DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2711-K9A2L1 in 3-5 days. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2711-K9A2L1 |
Product Line | Panelview 900 |
Display Size | 9 in. |
Display Color | Monochrome |
Input Type | Keypad |
Communication | DH-485 |
Input Power | 24 VDC |
Memory | 1008K bytes |
Backlight | Non-replaceable |
Communication Cable | 1747-UIC |
Shipping Weight | 8 lbs. |
Shipping Dimensions | 18 x 14 x 8 in |
Series | A, B, C, D, E, F |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 2711-K9A2L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K9A2L1 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2711-K9A2L1 |
Product Line | Panelview 900 |
Display Size | 9 in. |
Display Color | Monochrome |
Input Type | Keypad |
Communication | DH-485 |
Input Power | 24 VDC |
Memory | 1008K bytes |
Backlight | Non-replaceable |
Communication Cable | 1747-UIC |
Shipping Weight | 8 lbs. |
Shipping Dimensions | 18 x 14 x 8 in |
Series | A, B, C, D, E, F |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 2711-K9A2L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K9A2L1 units instead of migration.
sThe Allen-Bradley 2711-K9A2L1 is a DC-powered monochromatic keypad input terminal in the Bulletin 2711 PanelView Standard Operator Terminals series. It connects to a 24V DC power source and its maximum power consumption is 58 W (2.5 A). Its supply voltage ranging from 18-30V DC. It measures 9 inches and features a 640 x 400-pixel AC gas plasma screen. Its keypad input is designed for finger operation – gloved or bare.
The PV900M 2711-K9A2L1 Keypad Interface comes with a DH-485 communication port that allows connection to a DH-485 network, a Wallmount Power Supply (Cat. No. 1747-NP1), an SLC controller (point-to-point/ multiple), or a MicroLogix controller. It has the default settings of 31 for the max node address, 2 for the node address, and 19200 for the communication rate. To change the communication settings for this PanelView Terminal, go to the Configuration Mode menu.
Do not connect the 2711-K9A2L1 Terminal to an AC power source. For safety, the terminal should have its own branch conduit, and the power and signal units should be wired separately. When power is applied or the terminal is reset, the 2711-K9A2L1 runs a series of self-tests.
The user is able to control the HMI using the Keypad to input information and data. This unit has the following internal memory: 1008KB. If applicable this unit has an internal backlight replacement part number of Non-replaceable. The approximate shipping weight and dimensions are 8 lbs. and 18 x 14 x 8 in. The DH-485 terminals are capable of point-to-point communication with a single SLC 500 or MicroLogix controller. There is also system communication with multiple processors over the DH-485 network. Direct data table access via DH-485 minimizes the need for additional ladder logic.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $2816 | ![]() |
We can Repair your Panelview 900
We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:
We Can Repair Your Hardware failures including:
Please refer to the manual for more information about the 2711-K9A2L1 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2711-K9A2L1/A, Series A, Rev A | Request Quote | |
2711-K9A2L1/B, Series B, Rev B | Request Quote | |
2711-K9A2L1/C, Series C, Rev C | Request Quote | |
2711-K9A2L1/D, Series D, Rev D | Request Quote | |
2711-K9A2L1/E, Series E, Rev E | Request Quote | |
2711-K9A2L1/F, Series F, Rev F | Request Quote | |
2711-K9A2L1X
|
2711-K9A2L1/X, Series X, Rev X | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2711-K9A2L1 |
Product Line | Panelview 900 |
Display Size | 9 in. |
Display Color | Monochrome |
Input Type | Keypad |
Communication | DH-485 |
Input Power | 24 VDC |
Memory | 1008K bytes |
Backlight | Non-replaceable |
Communication Cable | 1747-UIC |
Shipping Weight | 8 lbs. |
Shipping Dimensions | 18 x 14 x 8 in |
Series | A, B, C, D, E, F |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2711-K9A2L1 |
Product Line | Panelview 900 |
Display Size | 9 in. |
Display Color | Monochrome |
Input Type | Keypad |
Communication | DH-485 |
Input Power | 24 VDC |
Memory | 1008K bytes |
Backlight | Non-replaceable |
Communication Cable | 1747-UIC |
Shipping Weight | 8 lbs. |
Shipping Dimensions | 18 x 14 x 8 in |
Series | A, B, C, D, E, F |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 2711-K9A2L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K9A2L1 units instead of migration.
The Allen-Bradley 2711-K9A2L1 is a DC-powered monochromatic keypad input terminal in the Bulletin 2711 PanelView Standard Operator Terminals series. It connects to a 24V DC power source and its maximum power consumption is 58 W (2.5 A). Its supply voltage ranging from 18-30V DC. It measures 9 inches and features a 640 x 400-pixel AC gas plasma screen. Its keypad input is designed for finger operation – gloved or bare.
The PV900M 2711-K9A2L1 Keypad Interface comes with a DH-485 communication port that allows connection to a DH-485 network, a Wallmount Power Supply (Cat. No. 1747-NP1), an SLC controller (point-to-point/ multiple), or a MicroLogix controller. It has the default settings of 31 for the max node address, 2 for the node address, and 19200 for the communication rate. To change the communication settings for this PanelView Terminal, go to the Configuration Mode menu.
Do not connect the 2711-K9A2L1 Terminal to an AC power source. For safety, the terminal should have its own branch conduit, and the power and signal units should be wired separately. When power is applied or the terminal is reset, the 2711-K9A2L1 runs a series of self-tests.
The user is able to control the HMI using the Keypad to input information and data. This unit has the following internal memory: 1008KB. If applicable this unit has an internal backlight replacement part number of Non-replaceable. The approximate shipping weight and dimensions are 8 lbs. and 18 x 14 x 8 in. The DH-485 terminals are capable of point-to-point communication with a single SLC 500 or MicroLogix controller. There is also system communication with multiple processors over the DH-485 network. Direct data table access via DH-485 minimizes the need for additional ladder logic.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $2816 | ![]() |
We can Repair your Panelview 900
We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:
We Can Repair Your Hardware failures including:
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $2816 | ![]() |
We can Repair your Panelview 900
We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:
We Can Repair Your Hardware failures including:
Please refer to the manual for more information about the 2711-K9A2L1 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2711-K9A2L1/A, Series A, Rev A | Request Quote | |
2711-K9A2L1/B, Series B, Rev B | Request Quote | |
2711-K9A2L1/C, Series C, Rev C | Request Quote | |
2711-K9A2L1/D, Series D, Rev D | Request Quote | |
2711-K9A2L1/E, Series E, Rev E | Request Quote | |
2711-K9A2L1/F, Series F, Rev F | Request Quote | |
2711-K9A2L1X
|
2711-K9A2L1/X, Series X, Rev X | Request Quote |