About 2711-K9A3

The discontinued Allen Bradley Panelview 900 2711-K9A3 is an operator terminal that enables the user to interface with their machine. This HMI has a 9-inch monochrome display. This Panelview allows the user to connect using Panelbuilder 32 software and a DH-485 and RS-232 Printer communication port with a 1747-UIC communication cable(s). The user is able to control the HMI using the Keypad to input information and data. This unit is powered using 120V AC power. This unit has the following internal memory: 1008KB. This unit has a non-replaceable internal backlight. The approximate shipping weight is 8 lbs. and the dimensions are 18 x 14 x 8 in. The most common Series are: A, B, C, D, E, and F and the most common firmware include versions 1.00-4.48. The DH-485 terminals are capable of point-to-point communication with a single SLC 500 or MicroLogix controller. There is also system communication with multiple processors over the DH-485 network. Direct data table access via DH-485 minimizes the need for additional ladder logic. Application files are easily downloaded or uploaded directly via the DH-485 programming port, through PanelBuilder32 on the DH-485 network, or with a PC memory card.

The Allen-Bradley 2711-K9A3 Terminal provides a configurable HMI solution for displaying, controlling, and monitoring status information. This compact human-machine interface is part of the Bulletin 2711 PanelView 900 Standard Operator Terminals series. It comes with a DH-485 communication port and an RS-232 printer port. It also ships with a memory card retainer that is used when the user is permanently installing a memory card with file applications in an electrical enclosure. 
The 2711-K9A3 9-inch Keypad Input Interface features an AC Gas Plasma display with a 640 x 400-pixel resolution. The keypad may be operated with a gloved or bare finger. It has function keys (F1-F16), cursor keys, and numeric entry keys that include backspace and enter buttons. Applications are controlled by pressing corresponding function keys, while the numeric keys are primarily used to enter data manually.
The 2711-K9A3 Mono Series Terminal is an IEC 1131-2 Equipment Class I device that requires connection with the GND (Ground) or with an earth conductor (Protective Earth). It has an input power of 120V AC with supply voltage limits between 85 and 264V AC at 47-63 Hz. It has a maximum power consumption of 110 VA. For optimal product life and performance, the operating temperature should not exceed 131 ° F at a non-condensing relative humidity at 5-85% at 32-86 ° F.

Technical specifications:

Type	Lead Time	Price	Action
Repair Service	2-4 weeks	$933	Add to Cart

We can Repair your Panelview 900

We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

Repair Turnaround of 3-5 Days for Most Panelviews

• Rush Repairs of 1-3 Days
• Fast Return of Your Repair via UPS, FedEx, or DHL.
• If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or new unit if available.
• Wide range of repairs that can be completed by our highly skilled technicians as shown below.
• RepairCapabilities:

  Auto Verification and Self-Test Failures

  ERROR! FEHLER! ERREUR! ERRORE!

  • Error 1 STATIC RAM test
  • Error 2 Terminal searching for a file to download.
  • Error 10 Erase boot flash area.
  • Error 11 Copy boot code
  • Error 12 Boot code copy successful
  • Error 13 Boot code copy failed. Check for error after boot code is copied to the onboard flash EPROM.
  • Error 20 Erase firmware from flash EPROM
  • Error 21 Copy firmware to firmware flash memory
  • Error 22 Firmware copy successful
  • Error 23 Firmware copy failed
  • Error 24 Performed CRC base firmware check
  • Error 25 Firmware not compatible with boot code
  • Error 26 Firmware not compatible with hardware
  • Error 30 Watchdog test
  • Error 31 Stuck key test
  • Error 32 Real time clock test
  • Error 33 LCD RAM failed
  • Error 34 Performed CRC extended firmware check
  • Error 40 No executable code to run after boot
  • Error 50 Wrong memory card format
  • Error 60 CPU could not execute code

  We Can Repair Your Hardware failures including:

  • Communication Hardware Faults (Ethernet/IP, DH-485, DH+, ControlNet, and RS-232)
  • Broken Toushcreen/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures