2711-T9A1 | Allen Bradley Panelview 900

×

2711-T9A1

Rated 5 with 18 reviews
About | Product Specifications | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711-T9A1

Description: The Allen-Bradley 2711-T9A1 is a PanelView 900 Standard Operator Terminal. This operator terminal is powered by an external 85-264VAC supply voltage and has a 9-inch monochrome display with Remote I/O (RIO) port and RS232 printer interface. It has an analog resistive touchscreen operator interface.
Available Now
Request a quote for 2711-T9A1

Description: The Allen-Bradley 2711-T9A1 is a PanelView 900 Standard Operator Terminal. This operator terminal is powered by an external 85-264VAC supply voltage and has a 9-inch monochrome display with Remote I/O (RIO) port and RS232 printer interface. It has an analog resistive touchscreen operator interface.
About | Products Specs | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711-T9A1 in 3-5 days.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 18 reviews

    Technical Specifications for 2711-T9A1

Input Voltage range:85…264V AC, 47…63 Hz
Application memory:240K bytes (prior to Series E); 1008K bytes (Series E)
Touch Cell size:26 x 25 pixels
Touchscreen:384 (24 columns x 16 rows)
Resolution:640 x 400
Display Area:210 x 131 mm (8.27 x 5.17 in.)
Display Type:AC Gas Plasma
Product Type:PanelView 900 Standard Operator Terminals
Product Family:PanelView Standard Terminals
Manufacturer:Rockwell Automation
Communication ports:Remote I/O (RIO); RS232 (printer)
BrandAllen-Bradley
Operating Temperature:0…55 ° C (32…131 ° F)
Input TypeTouch
Backlight100,000 hr LED backlight life
Heat Dissipation:39 W (132 BTU/HR)
Part Number/Catalog No.2711-T9A1
Product LinePanelview 900
Display Size9 in.
Display ColorMonochrome
CommunicationRemote I/O and RS-232 Printer
Input Power120 VAC
Memory1008K bytes
Communication Cable2711-NC13
Shipping Weight8 lbs.
Shipping Dimensions16 x 14 x 8 in
Series A, B, C, D, E, F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-T9A1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T9A1 units instead of migration.

Input Voltage range:85…264V AC, 47…63 Hz
Application memory:240K bytes (prior to Series E); 1008K bytes (Series E)
Touch Cell size:26 x 25 pixels
Touchscreen:384 (24 columns x 16 rows)
Resolution:640 x 400
Display Area:210 x 131 mm (8.27 x 5.17 in.)
Display Type:AC Gas Plasma
Product Type:PanelView 900 Standard Operator Terminals
Product Family:PanelView Standard Terminals
Manufacturer:Rockwell Automation
Communication ports:Remote I/O (RIO); RS232 (printer)
BrandAllen-Bradley
Operating Temperature:0…55 ° C (32…131 ° F)
Input TypeTouch
Backlight100,000 hr LED backlight life
Heat Dissipation:39 W (132 BTU/HR)
Part Number/Catalog No.2711-T9A1
Product LinePanelview 900
Display Size9 in.
Display ColorMonochrome
CommunicationRemote I/O and RS-232 Printer
Input Power120 VAC
Memory1008K bytes
Communication Cable2711-NC13
Shipping Weight8 lbs.
Shipping Dimensions16 x 14 x 8 in
Series A, B, C, D, E, F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-T9A1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T9A1 units instead of migration.

s

About 2711-T9A1

The Allen-Bradley 2711-T9A1 is a visualization component from the PanelView Standard operator terminal product family, specifically belonging to the PanelView Standard 600 product category. This operator terminal is flush mounted to an appropriate enclosure to enable operator and process operators to control the system from a central location in the factory floor level. This operator terminal increases operational accuracy as it provides accurate and real-time data without the need to locally access the instruments used in a system.

The 2711-T9A1 features a monochrome display screen with an approximate diagonal size of 6-inches with embedded 128 touch cells, enabling touch screen operation. It also comes with built-in Remote I/O communication port that supports the legacy protocol. This protocol uses the Allen-Bradley 1770-CD of the Belden 9463 3-wire communication cable. It can be used to communicate with one or more controllers over long distance. It also has a secondary port, an RS232 port with 9-pin sub-D connector used to communicate with alarm and events printers for documentation and historization purposes.

The 2711-T9A1 is externally powered with an AC supply voltage range of 85-264VAC along a frequency range of 47-63Hz. It is mounted to an enclosure rated NEMA Type 12/13, 4X (Indoor use only), IP54, IP65. It has Two (2) built-in status indicators used for indicating hardware fault and communication status. By default, the COMM led should lit green to indicate a normal communication status while the FAULT led shall be de-activated.

The 2711-T9A1 has a 9-inch grayscale display with a touchscreen input and navigation buttons. The terminal screen supports 4 shades of gray graphics and it has a 640 x 480 resolution. It has dimensions of 16 x 14x 8 in. and weighs 8 lbs. For data storage, it has 1 MB of nonvolatile memory and 310 KB of RAM. The 2711-T9A1 has an input voltage rating of 85 - 264V AC. With the remote I/O port, it supports hassle-free uploading and downloading of applications.

The 2711-T9A1 terminal facilitates work with its custom-designed applications. Its various features include universal language support, analog gauges, and screen security. For online printing, it comes equipped with an RS-232 port and various other ports for connecting to an SLC, a PLC, a scanner, or a Logix controller.

FAQ for 2711-T9A1

Does the 2711-T9A1 supplied with a colored display screen?


No. The 2711-T9A1 only has a 9-inch monochrome graphic display.

What is the input supply voltage range of the 2711-T9A1?


The 2711-T9A1 is externally powered by an AC power supply with acceptable range of 85-264VAC.

What are the embedded communication interfaces of the 2711-T9A1?


The 2711-T9A1 has embedded Remote I/O (RIO) port and RS232 printer interface.

Technical Description of 2711-T9A1

Panelview 900 Operator Inteface Touchscreen Model with Remote I/O Communication and RS-232 Printer Port Communication and 9 inch Monochrome Display

Repair Services for 2711-T9A1

Type Lead Time Price Action
Repair Service 2-4 weeks $1536cartAdd to Cart

We can Repair your Panelview 900

We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelviews
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.

We Can Repair Your Hardware failures including:

  • Communication Hardware Faults (Ethernet/IP, DH-485, DH+, ControlNet, and RS-232)
  • Broken Toushcreen/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Revisions for 2711-T9A1

Please refer to the manual for more information about the 2711-T9A1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711-T9A1 Ser A
2711-T9A1/A, Series A, Rev A Request Quote
2711-T9A1 Ser B
2711-T9A1/B, Series B, Rev B Request Quote
2711-T9A1 Ser C
2711-T9A1/C, Series C, Rev C Request Quote
2711-T9A1 Ser D
2711-T9A1/D, Series D, Rev D Request Quote
2711-T9A1 Ser E
2711-T9A1/E, Series E, Rev E Request Quote
2711-T9A1 Ser F
2711-T9A1/F, Series F, Rev F Request Quote
2711-T9A1X
2711-T9A1/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1-T9A1
  • 271l-T9A1
  • 2711-T9Al
  • 2711T9A1

Reviews for 2711-T9A1

Internal Review

"The 2711-T9A1 is an obsolete PanelView 900 operator terminal. This operator terminal boasts of a larger screen display compared to any PanelView 600 operator terminal as the 2711-T9A1 has 9-inch display screen, compatible of being designed with a custom process mimic with higher degree of complexity however, it only has a monochrome display which cannot support colored process mimic and animations. " -DO Supply Tech

Dimensions For 2711-T9A1

Size 9 inch
Input Type Touch
Panel Cutout Height 224 mm (8.8 in)
Panel Cutout Width 305 mm (12 in)
Terminal Height 249 mm (9.80 in)
Terminal Width 336 mm (13.24 in)
Terminal Overall Depth 112 mm (4.4 in)
Terminal Mounted Depth in90 mm (3.54

Dimensions For 2711-T9A1

Resolutions For 2711-T9A1

Size 9 inch
Input Type Touch
Display Resolution 640 x 400
About

Technical Specifications for 2711-T9A1

Input Voltage range:85…264V AC, 47…63 Hz
Application memory:240K bytes (prior to Series E); 1008K bytes (Series E)
Touch Cell size:26 x 25 pixels
Touchscreen:384 (24 columns x 16 rows)
Resolution:640 x 400
Display Area:210 x 131 mm (8.27 x 5.17 in.)
Display Type:AC Gas Plasma
Product Type:PanelView 900 Standard Operator Terminals
Product Family:PanelView Standard Terminals
Manufacturer:Rockwell Automation
Communication ports:Remote I/O (RIO); RS232 (printer)
BrandAllen-Bradley
Operating Temperature:0…55 ° C (32…131 ° F)
Input TypeTouch
Backlight100,000 hr LED backlight life
Heat Dissipation:39 W (132 BTU/HR)
Part Number/Catalog No.2711-T9A1
Product LinePanelview 900
Display Size9 in.
Display ColorMonochrome
CommunicationRemote I/O and RS-232 Printer
Input Power120 VAC
Memory1008K bytes
Communication Cable2711-NC13
Shipping Weight8 lbs.
Shipping Dimensions16 x 14 x 8 in
Series A, B, C, D, E, F
Product Lifecycle Status*Discontinued/Obsolete
Input Voltage range:85…264V AC, 47…63 Hz
Application memory:240K bytes (prior to Series E); 1008K bytes (Series E)
Touch Cell size:26 x 25 pixels
Touchscreen:384 (24 columns x 16 rows)
Resolution:640 x 400
Display Area:210 x 131 mm (8.27 x 5.17 in.)
Display Type:AC Gas Plasma
Product Type:PanelView 900 Standard Operator Terminals
Product Family:PanelView Standard Terminals
Manufacturer:Rockwell Automation
Communication ports:Remote I/O (RIO); RS232 (printer)
BrandAllen-Bradley
Operating Temperature:0…55 ° C (32…131 ° F)
Input TypeTouch
Backlight100,000 hr LED backlight life
Heat Dissipation:39 W (132 BTU/HR)
Part Number/Catalog No.2711-T9A1
Product LinePanelview 900
Display Size9 in.
Display ColorMonochrome
CommunicationRemote I/O and RS-232 Printer
Input Power120 VAC
Memory1008K bytes
Communication Cable2711-NC13
Shipping Weight8 lbs.
Shipping Dimensions16 x 14 x 8 in
Series A, B, C, D, E, F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-T9A1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T9A1 units instead of migration.

About 2711-T9A1

The Allen-Bradley 2711-T9A1 is a visualization component from the PanelView Standard operator terminal product family, specifically belonging to the PanelView Standard 600 product category. This operator terminal is flush mounted to an appropriate enclosure to enable operator and process operators to control the system from a central location in the factory floor level. This operator terminal increases operational accuracy as it provides accurate and real-time data without the need to locally access the instruments used in a system.

The 2711-T9A1 features a monochrome display screen with an approximate diagonal size of 6-inches with embedded 128 touch cells, enabling touch screen operation. It also comes with built-in Remote I/O communication port that supports the legacy protocol. This protocol uses the Allen-Bradley 1770-CD of the Belden 9463 3-wire communication cable. It can be used to communicate with one or more controllers over long distance. It also has a secondary port, an RS232 port with 9-pin sub-D connector used to communicate with alarm and events printers for documentation and historization purposes.

The 2711-T9A1 is externally powered with an AC supply voltage range of 85-264VAC along a frequency range of 47-63Hz. It is mounted to an enclosure rated NEMA Type 12/13, 4X (Indoor use only), IP54, IP65. It has Two (2) built-in status indicators used for indicating hardware fault and communication status. By default, the COMM led should lit green to indicate a normal communication status while the FAULT led shall be de-activated.

The 2711-T9A1 has a 9-inch grayscale display with a touchscreen input and navigation buttons. The terminal screen supports 4 shades of gray graphics and it has a 640 x 480 resolution. It has dimensions of 16 x 14x 8 in. and weighs 8 lbs. For data storage, it has 1 MB of nonvolatile memory and 310 KB of RAM. The 2711-T9A1 has an input voltage rating of 85 - 264V AC. With the remote I/O port, it supports hassle-free uploading and downloading of applications.

The 2711-T9A1 terminal facilitates work with its custom-designed applications. Its various features include universal language support, analog gauges, and screen security. For online printing, it comes equipped with an RS-232 port and various other ports for connecting to an SLC, a PLC, a scanner, or a Logix controller.

FAQ for 2711-T9A1

Does the 2711-T9A1 supplied with a colored display screen?


No. The 2711-T9A1 only has a 9-inch monochrome graphic display.

What is the input supply voltage range of the 2711-T9A1?


The 2711-T9A1 is externally powered by an AC power supply with acceptable range of 85-264VAC.

What are the embedded communication interfaces of the 2711-T9A1?


The 2711-T9A1 has embedded Remote I/O (RIO) port and RS232 printer interface.

Technical Description of 2711-T9A1

Panelview 900 Operator Inteface Touchscreen Model with Remote I/O Communication and RS-232 Printer Port Communication and 9 inch Monochrome Display
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $1536cartAdd to Cart

We can Repair your Panelview 900

We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelviews
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.

We Can Repair Your Hardware failures including:

  • Communication Hardware Faults (Ethernet/IP, DH-485, DH+, ControlNet, and RS-232)
  • Broken Toushcreen/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures
Type Lead Time Price Action
Repair Service 2-4 weeks $1536cartAdd to Cart

We can Repair your Panelview 900

We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelviews
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.

We Can Repair Your Hardware failures including:

  • Communication Hardware Faults (Ethernet/IP, DH-485, DH+, ControlNet, and RS-232)
  • Broken Toushcreen/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures
Revisions

Please refer to the manual for more information about the 2711-T9A1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711-T9A1 Ser A
2711-T9A1/A, Series A, Rev A Request Quote
2711-T9A1 Ser B
2711-T9A1/B, Series B, Rev B Request Quote
2711-T9A1 Ser C
2711-T9A1/C, Series C, Rev C Request Quote
2711-T9A1 Ser D
2711-T9A1/D, Series D, Rev D Request Quote
2711-T9A1 Ser E
2711-T9A1/E, Series E, Rev E Request Quote
2711-T9A1 Ser F
2711-T9A1/F, Series F, Rev F Request Quote
2711-T9A1X
2711-T9A1/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1-T9A1
  • 271l-T9A1
  • 2711-T9Al
  • 2711T9A1
PDF
2711-T9A1 PDF
Dimensions

Dimension For 2711-T9A1

Size 9 inch
Input Type Touch
Panel Cutout Height 224 mm (8.8 in)
Panel Cutout Width 305 mm (12 in)
Terminal Height 249 mm (9.80 in)
Terminal Width 336 mm (13.24 in)
Terminal Overall Depth 112 mm (4.4 in)
Terminal Mounted Depth in90 mm (3.54
Resolutions

Resolutions For 2711-T9A1

Size 9 inch
Input Type Touch
Display Resolution 640 x 400
Reviews

Reviews for 2711-T9A1

Internal Review

"The 2711-T9A1 is an obsolete PanelView 900 operator terminal. This operator terminal boasts of a larger screen display compared to any PanelView 600 operator terminal as the 2711-T9A1 has 9-inch display screen, compatible of being designed with a custom process mimic with higher degree of complexity however, it only has a monochrome display which cannot support colored process mimic and animations. " -DO Supply Tech